Hi folks,
I have worked very hard, testing and testing what is my wrong.
I have used a ICMP ping packet (1442 bytes of size) changing the source
IP address by the broadcast IP address of the target network address.
Well, I changed my method:
1st.
IP SRC= *.*.*.255
2nd.
IP SRC= *.*.*.33 (the gateway of the target host)
3rd.
IP SRC= *.*.*.22 (the same IP add of the target host).
Well, I used the SNIFFER Pro running on Windows 95.
I am testing a equipment based-on Linux (using IPFWADM).
BTH, Does anybody know what is the content normal of the IPFWADM�s
files, like as:
/proc/net/ip_acct
/proc/net/ip_input
/proc/net/ip_output
/proc/net/ip_forward
/proc/net/ip_masquered
Build in Linux release 4.0 Kernel 2.0.34 (where IPFWADM don�t mesh with
IPCHAINS). This is a equipment called Cobalt www.cobalt.com.
When I see if my Linux Cobalt is using rules, with cat ip_*, cat
etc,etc.... But I find with hEXadecimal content.
I guess that I must install Linux 4.0 and display these files.
-----
I test the same packets in a another scenario in a NT MAchine 4.0 using
IPForwarding, but the packets didn�t pass through the NT (when I had
used spoofing, but not when I used normal packets)
I used SNIFFER PRO all time.
Please, If you know what is the error in my packet?
I will try send you as *.cap file (to Sniffer of NAI)
TIA
Javier Romero
-
[To unsubscribe, send mail to [EMAIL PROTECTED] with
"unsubscribe firewalls" in the body of the message.]
