On 28 Feb 00, at 8:46, Radjen Chotoe wrote:
> Can anybody help me with this. I have a PIX 515 and I have installed Pix
> Firewall Manager ver 4.3(2)b on a Windows NT workstation to manage the PIX. I
> followed every step to make this work but as I browse with Internet Explorer 4.0
> to the ip number of the PIX on port 8080 I can't make any connection to the
> PIX. The ip address op the NT-workstation is configured for Telnet connection on
> the PIX. I also would like to know if there are other methods to manage the PIX
> and what the advantages and disadvantages are in those cases.
I haven't used the Firewall Manager yet (I've heard that Cisco are dumping it
and replacing it with a new one that can manage Firewall IOS and routers
too), but as far as I know you have to connect to port 8080 on the machine
running the manager software, not the PIX. The PIX doesn't run the software,
the workstation does and then telnets to the PIX when you've finished to
upload the configuration. If you're using IE on the same machine that you
have the firewall manager installed on try http://localhost:8080
Dan
---
D.C. Crichton email: [EMAIL PROTECTED]
Senior Systems Analyst tel: +44 (0)121 706 6000
Computer Manuals Ltd. fax: +44 (0)121 606 0477
Computer book info on the web:
http://computer-manuals.co.uk/
Want to earn money? Join our affiliate scheme!
http://computer-manuals.co.uk/affiliate/
-
[To unsubscribe, send mail to [EMAIL PROTECTED] with
"unsubscribe firewalls" in the body of the message.]
