> 2000-05-19-05:00:40 [EMAIL PROTECTED]:
> > we would like to set up FW-1 on an Intel-based Solaris box that
> > needs eight ethernet ports. Can anyone recommend/name quad-port
> > fast ethernet cards that can be used in such a config?
>
> I've never done anything with Solaris on i386, but if I had to, the
> first card I'd try would be the Znyx boards (www.znyx.com). As far
> as I know, they're straight DEC Tulip chipset interfaces, so as long
> as those are supported under Solaris i386 you should be golden. Just
> took a peek at the website and they claim to offer their special
> device drivers for Solaris as well.
>
The following znyx cards are supported on Solaris 8 x86 FCS
(from: http://soldc.sun.com/support/drivers/hcl/8/S8EA/files/c0110.htm#X86HCL-348659
Or:
http://soldc.sun.com/support/drivers/hcl/
Znyx
NetBlaster ZX345[b]
NetBlaster ZX346 QUAD[b] , [d]
NetBlaster ZX348 DUAL[b]
ZX342 10/100 (PCI)[b] , [d]
ZX344 QUAD[b]
Notes:
b. Because certain board revisions have been found not to work, refer to the table in
the "DEC 21040, 21041, 21140, 21142, 21143 Ethernet"
Device Reference Page for additional information.
d. Special configuration required; refer to the table in the "DEC 21040, 21041, 21140,
21142, 21143 Ethernet" Device Reference Page for
additional information.
HTH,
John
-
[To unsubscribe, send mail to [EMAIL PROTECTED] with
"unsubscribe firewalls" in the body of the message.]
