I've a Pix 4.2(4) with four segments, two etherenet, one fast ethernet and
one token ring:
[...]
nameif ethernet0 outside security0
nameif token-ring0 inside security100
nameif ethernet1 dmz security30
nameif ethernet2 fornitori security20
[...]
outbound 11 deny 224.0.0.0 255.0.0.0 0 0
outbound 11 permit 192.168.0.0 255.255.0.0 0 0
outbound 11 permit 192.9.202.0 255.255.255.0 0 0
outbound 11 permit 192.9.204.0 255.255.255.0 0 0
outbound 11 permit 208.134.161.0 255.255.255.0 0 0
outbound 11 permit 205.183.246.0 255.255.255.0 0 0
outbound 11 permit 199.105.176.0 255.255.248.0 0 0
outbound 11 permit 199.105.184.0 255.255.254.0 0 0
outbound 11 permit 151.99.0.0 255.255.0.0 25 tcp
outbound 11 deny 192.168.1.0 255.255.255.0 1080 tcp
apply (inside) 11 outgoing_dest
[...]
The problem i have is with outbound: when i add an outbound 11 deny 0 0 0,
i save the configuration with write mem, i reboot the Pix firewall and
half the times that lines go out, it disappear without mention.
I cannot understand if it's my fault (a concept mistake, since we cannot
say i'm a Pix guru) or a specific firmware release bug.
Sometimes the line is not deleted from the configuration but it is not
showed up with the command "show outbound".
Thanks in advance for any help.
--
Lorenzo Lazzeri
Intesis SpA Phone: +39.055.3024680
Via Volturno, 10/12 Fax: +39.055.300545
I-50019 Sesto Fiorentino (FI) Email: [EMAIL PROTECTED]
-
[To unsubscribe, send mail to [EMAIL PROTECTED] with
"unsubscribe firewalls" in the body of the message.]
