Sorry about the noise all.. I just saw the date on the post..a little past due. Roy At 01:47 PM 4/5/01 -0700, you wrote: >hello, >I think the answer must be simple, but .... > >we have a PIX fw with one inside interface and one outside interface. >Currently a small un-managed hub is serving 3 servers on the inside net. >we now have a Cisco 2948G switch to replace the hub. After configuring >the switch with an inside address and >route to the inside gateway, we switch the cables from the hub to the >switch. > >the inside systems and switches can see each other via ping. the pIX can >see them, but nothing on the >outside network can see the inside host that had been visible with the >hub. Pinging from the switch out does not work, DNS does not resolve. > >Dose the fw need a rule to allow the traffic from the switch to pass in >and out?? Can the >switch be set to a "dumb" mode.... > >I dropped the hub back in place and the network is working as it was. > >thanks for any help, >JEff >-- >- >[To unsubscribe, send mail to [EMAIL PROTECTED] with >"unsubscribe firewalls" in the body of the message.] - [To unsubscribe, send mail to [EMAIL PROTECTED] with "unsubscribe firewalls" in the body of the message.]
