Their site shows a the scenario that your servers all have internal IP
addresses and you want to pass traffic into those. That isn't really what I
am doing so that is why I am asking.
Thanks,
Neil
----- Original Message -----
From: "Kent Hundley" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursday, September 20, 2001 4:06 PM
Subject: RE: Passing Traffic through a Pix
> Neil,
>
> Have you tried looking at the PIX docs on the Cisco web site? They do a
> decent job of going through setting up a PIX for simple envrionments like
> the kind your talking about. I would start there first and see if it
> gives you what you need. You can also do a search on Cisco's site for
> 'security technical tips' and that will lead you to a lot of PIX configs.
>
> HTH,
> Kent
>
> -------------------------------------------------------------------------
> Could someone please help me to put a PIX on my network and pass normal
> traffic through it. I want to use no filters at this point. I also want
> all the addresses on the server to be available on the other side
(outside)
> of the pix.
> Thanks,
> Neil
>
>
_______________________________________________
Firewalls mailing list
[EMAIL PROTECTED]
http://lists.gnac.net/mailman/listinfo/firewalls
