i have tested it again on 6.1.1 without problems. ok, i have used other internal ports.
Yahoo wrote: > Hi Drik > > Static command worked for the following port. > > static (inside,outside) tcp 172.16.0.2 www 10.0.0.2 www netmask > 255.255.255.255 as you wrote i think, it's running for 172.16.0.2/80. right? > but for some reason it is not working when configured for > > static (inside,outside) tcp 172.16.0.3 www 10.0.0.2 8080 netmask > 255.255.255.255 mmh. i believe, it could be: - you didn't configure a service on 10.0.0.2/8080. what does a telnet from outside and localhost say or a "netstat -an"? - proxy arp at outside interface of firewall is disabled. - an acl for this connection is missing. i believe, you are still making a mistake. do you really enable logging? switch it to level debug. do you can see the incoming connection "sho conn" or the translation "sho xlate" at firewall? dirk -- energis-ISION Dirk Pfau IP Network / iSecurity Harburger Schlossstr. 1 D-21079 Hamburg Fon: +49 40 77175-538 eMail: [EMAIL PROTECTED] Web: http://www.energis-ision.com _______________________________________________ Firewalls mailing list [EMAIL PROTECTED] http://lists.gnac.net/mailman/listinfo/firewalls
