there are no collisions... I tryed 10half and 10full and auto on all interfaces, when I connect server without the PIX515 backup is going OK... but I cannot do that in this way when I'm doing my backup I don't even can connect to the PIX by ssh or telnet, I have to connect trough console port... thats really make me mad !
I didn't found any command that can tell me whitch process takes the cpu time sh proc - only processes sh cpu u - only global use rgrds PD > a real backup through a pix515 is a problem. with 100full on all > interfaces the cpu utilization is near 100%. but at 10full? > my tip, you have collisions with the equipment on int2/int3. does it > really support 10full? first i would switch the interfaces on pix to > 10half (10baset) or auto and test it again. > but why do you have a high load? what's about the traffic through the > pix? is it high? which process takes the cpu time? > pd wrote: > > this is a backup connection, on int2 are servers and on int3 is backup device > > when there is a backup process working the CPU utilization is 100% > > (all interfaces are 10/100Ethernet) > > but int2 is 10full and int3 is 10full too > > besides CPU ustilization the problem is in time... 2.5GB data is backuping about 15hours -- Okresl Swoje potrzeby - my znajdziemy oferte za Ciebie! [ http://oferty.onet.pl ] _______________________________________________ Firewalls mailing list [EMAIL PROTECTED] http://lists.gnac.net/mailman/listinfo/firewalls
