A true MZ is the net between the firewall and the Internet, not behind a firewall. If 
this is the case, then you have the choice of a public address or a simple 1-1 NAT (IP 
redirect) set up on your NAT enabled router. If your router can handle Port Address 
Translation, where  it sends the traffic from a single Internet address to separate 
servers depending on destination port, you can save Internet IP space by using private 
addresses. But your servers are not being protected by your firewall.

If it is the more common server segment on a third NIC of the firewall, then it can 
use private address space, either IP redirect, PAT or full dynamic NAT. But it still 
would be a good idea to set up this server segment with a separate subnet address to 
ease routing and rule making on the firewall.

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of John S. Strock
Sent: Wed April 03 2002 18:26
To: [EMAIL PROTECTED]
Subject: Basic DMZ Setup Questions...


I have a few questions regarding setting up a DMZ.  Currently our 
public servers are behind our LAN port on our Firewall, with only the 
ports we need opened.  I would like to move these server to the DMZ 
port of our SonicWall DMZ firewall.  My question is...once I put 
something in the DMZ, do I need to give it a different IP address, 
meaning do I need to change it from an internal LAN IP to a external 
WAN IP?  Currently, my NAT router handle's that.  And if I do give it a 
WAN IP, does that mean I take it out of my NAT table?  I plan on using 
our HP Switch to create 2 VLAN's, one for our LAN and one for the DMZ 
Zone (currently our switch is not VLANed and it's used for our internal 
LAN).  Would this work, is this a good idea?  Can you give me any basic 
setup ideas/suggestions?

Thanks!

John
_______________________________________________
Firewalls mailing list
[EMAIL PROTECTED]
http://lists.gnac.net/mailman/listinfo/firewalls

_______________________________________________
Firewalls mailing list
[EMAIL PROTECTED]
http://lists.gnac.net/mailman/listinfo/firewalls

Reply via email to