Add FEATURE_REGISTERMAP to
* Intel 82802AB, 82802AC
* Sharp LHF00L04
* SST SST49LF004C, SST49LF008C, SST49LF016C, SST49LF160C
* ST M50FLW040A, M50FLW040B, M50FLW080A, M50FLW080B, M50FW002, M50FW016
M50FW040, M50FW080, M50LPW116
Make register mapping conditional on FEATURE_REGISTERMAP in 82802ab.c.
Replace probe_49lfxxxc with probe_82802ab.
Replace probe_28sf040 with probe_82802ab.
Replace probe_sst_fwhub with probe_jedec.
Add printlock_sst_fwhub to chips which used probe_sst_fwhub.
Signed-off-by: Carl-Daniel Hailfinger <[email protected]>
Index: flashrom-probe_cleanup/flashchips.c
===================================================================
--- flashrom-probe_cleanup/flashchips.c (Revision 935)
+++ flashrom-probe_cleanup/flashchips.c (Arbeitskopie)
@@ -2388,15 +2388,15 @@
.vendor = "Intel",
.name = "82802AB",
.bustype = CHIP_BUSTYPE_FWH,
.manufacture_id = INTEL_ID,
.model_id = I_82802AB,
.total_size = 512,
.page_size = 64 * 1024,
- .feature_bits = 0,
+ .feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_OK_PRW,
.probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine does not use
probe_timing (82802ab.c) */
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
@@ -2411,15 +2411,15 @@
.vendor = "Intel",
.name = "82802AC",
.bustype = CHIP_BUSTYPE_FWH,
.manufacture_id = INTEL_ID,
.model_id = I_82802AC,
.total_size = 1024,
.page_size = 64 * 1024,
- .feature_bits = 0,
+ .feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_OK_PRW,
.probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine does not use
probe_timing (82802ab.c) */
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 16} },
@@ -3438,17 +3438,17 @@
.vendor = "Sharp",
.name = "LHF00L04",
.bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */
.manufacture_id = SHARP_ID,
.model_id = SHARP_LHF00L04,
.total_size = 1024,
.page_size = 64 * 1024,
- .feature_bits = FEATURE_EITHER_RESET,
+ .feature_bits = FEATURE_EITHER_RESET | FEATURE_REGISTERMAP,
.tested = TEST_UNTESTED,
- .probe = probe_49lfxxxc,
+ .probe = probe_82802ab,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 15},
{8 * 1024, 8}
@@ -3719,15 +3719,15 @@
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_28SF040,
.total_size = 512,
.page_size = 256,
.feature_bits = 0,
.tested = TEST_UNTESTED,
- .probe = probe_28sf040,
+ .probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine don't use
probe_timing (sst28sf040.c) */
.block_erasers =
{
{
.eraseblocks = { {128, 4096} },
.block_erase = erase_sector_28sf040,
}, {
@@ -4074,58 +4074,60 @@
.bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */
.manufacture_id = SST_ID,
.model_id = SST_49LF002A,
.total_size = 256,
.page_size = 16 * 1024,
.feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET,
.tested = TEST_OK_PRW,
- .probe = probe_sst_fwhub,
- .probe_timing = 1, /* 150 ns | routine is wrapper
to probe_jedec (sst_fwhub.c) */
+ .probe = probe_jedec,
+ .probe_timing = 1, /* 150 ns */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = erase_sst_fwhub_sector,
}, {
.eraseblocks = { {16 * 1024, 16} },
.block_erase = erase_sst_fwhub_block,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = NULL, /* AA 55 80 AA 55 10, only
in A/A mux mode */
}
},
+ .printlock = printlock_sst_fwhub,
.write = write_sst_fwhub,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST49LF003A/B",
.bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */
.manufacture_id = SST_ID,
.model_id = SST_49LF003A,
.total_size = 384,
.page_size = 64 * 1024,
.feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET,
.tested = TEST_OK_PR,
- .probe = probe_sst_fwhub,
- .probe_timing = 1, /* 150 ns | routine is wrapper
to probe_jedec (sst_fwhub.c) */
+ .probe = probe_jedec,
+ .probe_timing = 1, /* 150 ns */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 96} },
.block_erase = erase_sst_fwhub_sector,
}, {
.eraseblocks = { {64 * 1024, 6} },
.block_erase = erase_sst_fwhub_block,
}, {
.eraseblocks = { {384 * 1024, 1} },
.block_erase = NULL, /* AA 55 80 AA 55 10, only
in A/A mux mode */
}
},
+ .printlock = printlock_sst_fwhub,
.write = write_sst_fwhub,
.read = read_memmapped,
},
{
/* Contrary to the data sheet, TBL# on the SST49LF004B affects
the top 128kB (instead of 64kB)
* and is only honored for 64k block erase, but not 4k sector
erase.
@@ -4135,44 +4137,45 @@
.bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */
.manufacture_id = SST_ID,
.model_id = SST_49LF004A,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
- .probe = probe_sst_fwhub,
- .probe_timing = 1, /* 150 ns | routine is wrapper
to probe_jedec (sst_fwhub.c) */
+ .probe = probe_jedec,
+ .probe_timing = 1, /* 150 ns */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = erase_sector_jedec, /* missing
unlock */
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sst_fwhub_block, /* same
as erase_block_jedec, but with unlock */
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = NULL, /* AA 55 80 AA 55 10, only
in A/A mux mode */
},
},
+ .printlock = printlock_sst_fwhub,
.write = write_sst_fwhub,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST49LF004C",
.bustype = CHIP_BUSTYPE_FWH,
.manufacture_id = SST_ID,
.model_id = SST_49LF004C,
.total_size = 512,
.page_size = 4 * 1024,
- .feature_bits = 0,
+ .feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_UNTESTED,
- .probe = probe_49lfxxxc,
+ .probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine don't use
probe_timing (sst49lfxxxc.c) */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = erase_sector_49lfxxxc,
}, {
@@ -4195,44 +4198,45 @@
.bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */
.manufacture_id = SST_ID,
.model_id = SST_49LF008A,
.total_size = 1024,
.page_size = 64 * 1024,
.feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET,
.tested = TEST_OK_PRW,
- .probe = probe_sst_fwhub,
- .probe_timing = 1, /* 150 ns | routine is wrapper
to probe_jedec (sst_fwhub.c) */
+ .probe = probe_jedec,
+ .probe_timing = 1, /* 150 ns */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = erase_sst_fwhub_sector,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = erase_sst_fwhub_block,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = NULL, /* AA 55 80 AA 55 10, only
in A/A mux mode */
}
},
+ .printlock = printlock_sst_fwhub,
.write = write_sst_fwhub,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST49LF008C",
.bustype = CHIP_BUSTYPE_FWH,
.manufacture_id = SST_ID,
.model_id = SST_49LF008C,
.total_size = 1024,
.page_size = 4 * 1024,
- .feature_bits = 0,
+ .feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_UNTESTED,
- .probe = probe_49lfxxxc,
+ .probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine don't use
probe_timing (sst49lfxxxc.c) */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = erase_sector_49lfxxxc,
}, {
@@ -4253,17 +4257,17 @@
.vendor = "SST",
.name = "SST49LF016C",
.bustype = CHIP_BUSTYPE_FWH,
.manufacture_id = SST_ID,
.model_id = SST_49LF016C,
.total_size = 2048,
.page_size = 4 * 1024,
- .feature_bits = 0,
+ .feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_OK_PRW,
- .probe = probe_49lfxxxc,
+ .probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine don't use
probe_timing (sst49lfxxxc.c) */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = erase_sector_49lfxxxc,
}, {
@@ -4374,15 +4378,15 @@
.manufacture_id = SST_ID,
.model_id = SST_49LF040B,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
- .probe_timing = 1, /* 150ns | routine is wrapper
to probe_jedec (sst_fwhub.c) */
+ .probe_timing = 1, /* 150ns */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {64 * 1024, 8} },
@@ -4429,17 +4433,17 @@
.vendor = "SST",
.name = "SST49LF160C",
.bustype = CHIP_BUSTYPE_LPC,
.manufacture_id = SST_ID,
.model_id = SST_49LF160C,
.total_size = 2048,
.page_size = 4 * 1024,
- .feature_bits = 0,
+ .feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_OK_PRW,
- .probe = probe_49lfxxxc,
+ .probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine don't use
probe_timing (sst49lfxxxc.c) */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = erase_sector_49lfxxxc,
}, {
@@ -4962,15 +4966,15 @@
.vendor = "ST",
.name = "M50FLW040A",
.bustype = CHIP_BUSTYPE_FWH | CHIP_BUSTYPE_LPC, /* A/A
Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50FLW040A,
.total_size = 512,
.page_size = 64 * 1024,
- .feature_bits = 0,
+ .feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_FIXME,
.block_erasers =
{
{
.eraseblocks = {
@@ -4996,15 +5000,15 @@
.vendor = "ST",
.name = "M50FLW040B",
.bustype = CHIP_BUSTYPE_FWH | CHIP_BUSTYPE_LPC, /* A/A
Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50FLW040B,
.total_size = 512,
.page_size = 64 * 1024,
- .feature_bits = 0,
+ .feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_FIXME,
.block_erasers =
{
{
.eraseblocks = {
@@ -5030,15 +5034,15 @@
.vendor = "ST",
.name = "M50FLW080A",
.bustype = CHIP_BUSTYPE_FWH | CHIP_BUSTYPE_LPC, /* A/A
Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50FLW080A,
.total_size = 1024,
.page_size = 64 * 1024,
- .feature_bits = 0,
+ .feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_FIXME,
.block_erasers =
{
{
.eraseblocks = {
@@ -5064,15 +5068,15 @@
.vendor = "ST",
.name = "M50FLW080B",
.bustype = CHIP_BUSTYPE_FWH | CHIP_BUSTYPE_LPC, /* A/A
Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50FLW080B,
.total_size = 1024,
.page_size = 64 * 1024,
- .feature_bits = 0,
+ .feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_FIXME,
.block_erasers =
{
{
.eraseblocks = {
@@ -5098,15 +5102,15 @@
.vendor = "ST",
.name = "M50FW002",
.bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50FW002,
.total_size = 256,
.page_size = 64 * 1024,
- .feature_bits = 0,
+ .feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine don't use
probe_timing (sst49lfxxxc.c) */
.block_erasers =
{
{
.eraseblocks = {
@@ -5129,15 +5133,15 @@
.vendor = "ST",
.name = "M50FW016",
.bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50FW016,
.total_size = 2048,
.page_size = 64 * 1024,
- .feature_bits = 0,
+ .feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine don't use
probe_timing (82802ab.c) */
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 32}, },
@@ -5155,15 +5159,15 @@
.vendor = "ST",
.name = "M50FW040",
.bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50FW040,
.total_size = 512,
.page_size = 64 * 1024,
- .feature_bits = 0,
+ .feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_OK_PRW,
.probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine don't use
probe_timing (82802ab.c) */
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8}, },
@@ -5181,15 +5185,15 @@
.vendor = "ST",
.name = "M50FW080",
.bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50FW080,
.total_size = 1024,
.page_size = 64 * 1024,
- .feature_bits = 0,
+ .feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_OK_PRW,
.probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine don't use
probe_timing (82802ab.c) */
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 16}, },
@@ -5207,15 +5211,15 @@
.vendor = "ST",
.name = "M50LPW116",
.bustype = CHIP_BUSTYPE_LPC, /* A/A Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50LPW116,
.total_size = 2048,
.page_size = 64 * 1024,
- .feature_bits = 0,
+ .feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info
specified */
.block_erasers =
{
{
.eraseblocks = {
Index: flashrom-probe_cleanup/sst_fwhub.c
===================================================================
--- flashrom-probe_cleanup/sst_fwhub.c (Revision 935)
+++ flashrom-probe_cleanup/sst_fwhub.c (Arbeitskopie)
@@ -79,26 +79,22 @@
blockstatus = check_sst_fwhub_block_lock(flash, offset);
printf_debug("%s\n", (blockstatus) ? "failed" : "OK");
}
return blockstatus;
}
-/* probe_jedec works fine for probing */
-int probe_sst_fwhub(struct flashchip *flash)
+int printlock_sst_fwhub(struct flashchip *flash)
{
int i;
- if (probe_jedec(flash) == 0)
- return 0;
-
for (i = 0; i < flash->total_size * 1024; i += flash->page_size)
check_sst_fwhub_block_lock(flash, i);
- return 1;
+ return 0;
}
int erase_sst_fwhub_block(struct flashchip *flash, unsigned int offset,
unsigned int page_size)
{
uint8_t blockstatus = clear_sst_fwhub_block_lock(flash, offset);
if (blockstatus) {
Index: flashrom-probe_cleanup/82802ab.c
===================================================================
--- flashrom-probe_cleanup/82802ab.c (Revision 935)
+++ flashrom-probe_cleanup/82802ab.c (Arbeitskopie)
@@ -65,15 +65,16 @@
programmer_delay(10);
printf_debug("%s: id1 0x%02x, id2 0x%02x\n", __func__, id1, id2);
if (id1 != flash->manufacture_id || id2 != flash->model_id)
return 0;
- map_flash_registers(flash);
+ if (flash->feature_bits & FEATURE_REGISTERMAP)
+ map_flash_registers(flash);
return 1;
}
uint8_t wait_82802ab(chipaddr bios)
{
uint8_t status;
Index: flashrom-probe_cleanup/chipdrivers.h
===================================================================
--- flashrom-probe_cleanup/chipdrivers.h (Revision 935)
+++ flashrom-probe_cleanup/chipdrivers.h (Arbeitskopie)
@@ -113,14 +113,15 @@
/* sst_fwhub.c */
int probe_sst_fwhub(struct flashchip *flash);
int erase_sst_fwhub(struct flashchip *flash);
int erase_sst_fwhub_block(struct flashchip *flash, unsigned int offset,
unsigned int page_size);
int erase_sst_fwhub_sector(struct flashchip *flash, unsigned int offset,
unsigned int page_size);
int write_sst_fwhub(struct flashchip *flash, uint8_t *buf);
+int printlock_sst_fwhub(struct flashchip *flash);
/* w39v040c.c */
int probe_w39v040c(struct flashchip *flash);
int erase_w39v040c(struct flashchip *flash);
int write_w39v040c(struct flashchip *flash, uint8_t *buf);
int printlock_w39v040c(struct flashchip *flash);
--
"I do consider assignment statements and pointer variables to be among
computer science's most valuable treasures."
-- Donald E. Knuth
_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom
