On 09/06/10 02:24, Marko Kraljevic wrote:
Hi Andrew,
This probably isn't too important, Most (all?) parallel flash can jive
with TTL levels (ie.>= 2V is high,<= 0,8V is low, in-between is
garbage).
eg. this datasheet (29F002) - see the Vil and Vih specifications.
http://www.datasheetcatalog.org/datasheets/150/489768_DS.pdf
However, it is essential that VCC be 5V, give or take. 3,3V will cause
errors. Are you saying Vcc is 3,3V? Or just the data/addr lines?
Vcc is 3.3v!
I wonder if that's why they didn't put a socket on the board... :)
--
Andrew.
_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom
