On Fri, 2010-07-16 at 12:55 +0200, Carl-Daniel Hailfinger wrote: > Hi Alec, > > could you try this patch on your Xbox? If it works, please reply-to-all > with the output from > flashrom -V > and include a line saying "Acked-by: Your Name <y...@email>". > > Add Winbond W49F020 support. This chip is used on some Xbox versions. > > Signed-off-by: Carl-Daniel Hailfinger <[email protected]> > > Index: flashrom-w49f020/flashchips.c > =================================================================== > --- flashrom-w49f020/flashchips.c (Revision 1082) > +++ flashrom-w49f020/flashchips.c (Arbeitskopie) > @@ -6474,6 +6474,29 @@ > > { > .vendor = "Winbond", > + .name = "W49F020", > + .bustype = CHIP_BUSTYPE_PARALLEL, > + .manufacture_id = WINBOND_ID, > + .model_id = W_49F020, > + .total_size = 256, > + .page_size = 128, > + .feature_bits = FEATURE_EITHER_RESET, > + .tested = TEST_UNTESTED, > + .probe = probe_jedec, > + .probe_timing = 10, > + .block_erasers = > + { > + { > + .eraseblocks = { {256 * 1024, 1} }, > + .block_erase = erase_chip_block_jedec, > + } > + }, > + .write = write_jedec_1, > + .read = read_memmapped, > + }, > + > + { > + .vendor = "Winbond", > .name = "W49V002A", > .bustype = CHIP_BUSTYPE_LPC, > .manufacture_id = WINBOND_ID, > > I had some interesting results. It didnt compile as-is, since the svn version still has the board_enable.c:788 error, but when i applied the patch to your modified version, it compiled fine and detected the chip: flashrom output: http://pastebin.ca/1901707 flashrom -V output: http://pastebin.ca/1901709 But when I try flashrom -r test.bin, it says this: http://pastebin.ca/1901714 then it suddenly dies, or at least disconnects from the network, since my SSH session freezes. I could try plugging it into a TV to test it and see what the error is, if that'd help?
And apparently I'm supposed to say this: Acked-by: Alec Wright <[email protected]> _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
