Please use "reply to all" in the future. Thanks. 2011/4/19 Cyrille Bartholomée <[email protected]>: > Dear Idwer, > > Just built checkout from svn. It outputs this result:
Again: DO NOT REBOOT OR POWEROFF YOUR LAPTOP. > > flashrom v0.9.3-r1288 on Linux 2.6.35-28-generic (i686), built with libpci > 3.1.7, GCC 4.4.5, little endian > > flashrom is free software, get the source code at http://www.flashrom.org > > Calibrating delay loop... delay loop is unreliable, trying to continue OK. > > Found chipset "Intel ICH4-M", enabling flash write... OK. > > This chipset supports the following protocols: FWH. > > Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000. > > Flash image seems to be a legacy BIOS. Disabling checks. > > Erasing and writing flash chip... ERASE FAILED at 0x00016000! Expected=0xff, > Read=0xae, failed byte count from 0x00016000-0x00016fff: 0xfde > > ERASE FAILED! > > ERASE FAILED at 0x00010000! Expected=0xff, Read=0xca, failed byte count from > 0x00010000-0x0001ffff: 0xfeb2 > > ERASE FAILED! > > Segmentatiefout > > Segmentatiefout=segmentation error flashrom should NOT have segfaulted. Can you show the last lines of dmesg (dmesg | tail) ? > > Maybe this information can help you? > > Regards, > > Cyrille Bartholomée | De Damhouderestraat 20 | 2018 Antwerpen > > t. 0032 3 298 4244 | m. 0032 499 711 018 | e. [email protected] > > Op dinsdag 19 april 2011 07:25:59 schreef Cyrille Bartholomée: > >> Dear Idwer, > >> > >> > >> First of all thank you for responding so fast and trying to help me! > >> > >> 1. Downloaded and built latest flashrom. Problem remains exactly the same >> as with previous version. > >> 2. I am using an Asus laptop model M6Ne, the exact type of board I don't >> know. > >> 3. I have run the commands you mentioned, the results are attached to this >> mail. > >> > >> If there is more information you need, please let me know. > >> > >> Again, thanks for your help. > >> > >> > >> Kind regards, > >> > >> Cyrille Bartholomée | De Damhouderestraat 20 | 2018 Antwerpen > >> t. 0032 3 298 4244 | m. 0032 499 711 018 | e. [email protected] > >> > >> Op dinsdag 19 april 2011 00:21:28 schreef u: > >> > 2011/4/18 Cyrille Bartholomée <[email protected]>: > >> > > Dear, > >> > > > >> > > I'm facing this problem when flashing my rom: > >> > > > >> > > flashrom v0.9.2-r1028 on Linux 2.6.35-28-generic (i686), built with >> > > libpci > >> > > 3.0.0, GCC 4.4.4, little endian > >> > > > >> > > flashrom is free software, get the source code at >> > > http://www.flashrom.org > >> > > > >> > > Calibrating delay loop... delay loop is unreliable, trying to continue >> > > OK. > >> > > > >> > > No coreboot table found. > >> > > > >> > > Found chipset "Intel ICH4-M", enabling flash write... OK. > >> > > > >> > > This chipset supports the following protocols: Non-SPI. > >> > > > >> > > Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address >> > > 0xfff80000. > >> > > > >> > > Flash image seems to be a legacy BIOS. Disabling checks. > >> > > > >> > > Writing flash chip... Erasing flash chip... ERASE FAILED at >> > > 0x00000008! > >> > > Expected=0xff, Read=0x00, failed byte count from >> > > 0x00000000-0x00000fff: > >> > > 0xfc5 > >> > > > >> > > ERASE FAILED! > >> > > > >> > > ERASE FAILED at 0x00000008! Expected=0xff, Read=0x00, failed byte >> > > count from > >> > > 0x00000000-0x0000ffff: 0xfadb > >> > > > >> > > ERASE FAILED! > >> > > > >> > > FAILED! > >> > > > >> > > ERASE FAILED! > >> > > > >> > > FAILED! > >> > > > >> > > Your flash chip is in an unknown state. > >> > > > >> > > Get help on IRC at irc.freenode.net (channel #flashrom) or > >> > > > >> > > mail [email protected]! > >> > > >> > Can you: > >> > - try a newer release (or build the latest developemt code yourself > >> > http://www.flashrom.org/Downloads#Installation_from_source) > >> > - mention the exact name of your board (including revision, if there > >> > are multiple revisions) > >> > - attach the output of 'flashrom -V', 'lspci -nnvvvxxx', 'superiotool > >> > -deV' (run all commands as root) > >> > > >> > > >> > Thanks in advance, > >> > Idwer > >> > > >> > > > >> > > >> > > ------------------------------------------------------------------------------- > >> > > > >> > > DO NOT REBOOT OR POWEROFF! > >> > > > >> > > Regards, > >> > > > >> > > Cyrille Bartholomée | De Damhouderestraat 20 | 2018 Antwerpen > >> > > > >> > > t. 0032 3 298 4244 | m. 0032 499 711 018 | e. [email protected] > >> > > > >> > > _______________________________________________ > >> > > flashrom mailing list > >> > > [email protected] > >> > > http://www.flashrom.org/mailman/listinfo/flashrom > >> > > > >> > > >> _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
