2011/4/20 David Bein <[email protected]>: > Hello ... > > I am very impressed with flashrom. I just used it on a motherboard based on > the Lynnfield 3420 chipset and it worked very well and is much faster than > the > AMI supplied equivalent. > > I have one problem which is that the very first boot after flashing the > bios rom > image, the bios complains about a CMOS checksum error and patiently > waits for some input. I am assuming others have been here before. What I did > next > was enter the bios menu and tell it to save changes (none made). All boots > after > this no longer complain about the CMOS checksum. > > The reason flashrom is interesting to us (aside from not being restricted > by AMI) > is for unattended use in customer upgrade situations. Having any upgrade > path > require a human to type something is a bit of a problem. > > Any helpful hints will be greatly appreciated.
nvramtool is what you are looking for: http://www.coreboot.org/Nvramtool > > Last but not least, thank you to all of you whole have put a lot of effort > into > this tool for use by coreboot and others. This really validates why open > source > is needed in the first place. > > --David > > > > _______________________________________________ > flashrom mailing list > [email protected] > http://www.flashrom.org/mailman/listinfo/flashrom > _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
