* Marco Runge <[email protected]> [110512 14:46]: > I am a Software Engineer from Raytheon Ansch tz Germany and wanted to use > flashrom to update the bios of our embedded bord form emerson. Unfortuneately > s.th. must have gone wrong. First write of the bios was fine but after reboot > I > got a crisis report that the two flash banks are corrupt. I could boot from > thumb drive anyway and wanted to write the backup copy but got the following > error message: > > Erase failed at 0x00000010! Expected=0xff, Read=0x5a, failed byte count from > 0x00000000 - 0x0000ffff: 0xd092. > > We are using the following board: http://www.emersonnetworkpower.com/en-US/ > Products/EmbeddedComputing/CompactPCI/Pages/EmbCompCPCI7203.aspx > > Chipset: Intel Ibex Peak > Found chipset: Atmel AT25DF641 8192Kb SPI at 0xff800000 > > I hope you can help
Please post the full log (possibly with --verbose) Also, does the image in flash match what you previously read from the chip? In that case it's most likely that the flash is write protected Stefan _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
