On Wed, 14 Sep 2011 16:52:55 +0200 Florian Scholz <[email protected]> wrote:
> Hi, > > please have a look on this report, the MCP73 should?? be supported but > it isn't as it seems. > > Florian > > Here is the flashrom -V report: > > flashrom v1.9.3-r1205 on Linux 3.1.0-rc4-git2 (i686), built with > libpci 3.1.7, GCC 4.4.5, little endian > […] > Found chipset "NVIDIA MCP73", enabling flash write... chipset PCI ID > is 10de:07d7, This chipset is not really supported yet. Guesswork... > ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 > Flash bus type is SPI > SPI on this chipset is WIP. Write is unsupported! > Found SMBus device 10de:07d8 at 00:03:1 > MCP SPI BAR is at 0xfea80000 > Mapping NVIDIA MCP6x SPI at 0xfea80000, unaligned size 0x544. > SPI control is 0xc012, req=0, gnt=0 > Please send the output of "flashrom -V" to [email protected] with > your board name: flashrom -V as the subject to help us finish support for your > chipset. Thanks. Hello Florian! Please upgrade to 0.9.4 (or later) and report back. It will still warn you, but i think it should actually work. Of course the mainboard might need a hack too, but you will be notified of that separately (if writing fails at address 0 and the content of the flash remains unchanged) and we will implement it then. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
