On Sun, 11 Mar 2012 18:03:35 +0100 Susan Scheibe <[email protected]> wrote:
> at least with "nopat" on the kernel command line and accessible /dev/mem > flashrom was able to flash this board successfully on a Gentoo hardened > system. Probably it would have worked without all these safety measures, > because flashrom was able to read and verify the existing bios before. Here > is the output of flashrom -V: > Hello Susan, thanks for your report! I have added the board to our list of supported boards and will commit that later together with other small changes. Can you confirm, that the two files (the one you read before the write and the one you wrote) are different? that is very important because flashrom does skip equal blocks completely and in that case we do not know if erasing/writing really works. the verbose log indicates skipping by printing something like ":S" instead of ":EW" (erase, write) after the address ranges. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
