Author: stefanct Date: Sat Oct 27 02:34:18 2012 New Revision: 1617 URL: http://flashrom.org/trac/flashrom/changeset/1617
Log: serprog: move the macro list to its own header file. Signed-off-by: Stefan Tauner <[email protected]> Acked-by: Stefan Tauner <[email protected]> Added: trunk/serprog.h (contents, props changed) Modified: trunk/Documentation/serprog-protocol.txt trunk/serprog.c Modified: trunk/Documentation/serprog-protocol.txt ============================================================================== --- trunk/Documentation/serprog-protocol.txt Sat Oct 27 02:06:02 2012 (r1616) +++ trunk/Documentation/serprog-protocol.txt Sat Oct 27 02:34:18 2012 (r1617) @@ -92,28 +92,4 @@ In addition, support for these commands is recommended: S_CMD_Q_PGMNAME, S_CMD_Q_BUSTYPE, S_CMD_Q_CHIPSIZE (if parallel). - -This define listing should help C coders - (it's here to be the single source for copying - will be a .h someday i think) -#define S_ACK 0x06 -#define S_NAK 0x15 -#define S_CMD_NOP 0x00 /* No operation */ -#define S_CMD_Q_IFACE 0x01 /* Query interface version */ -#define S_CMD_Q_CMDMAP 0x02 /* Query supported commands bitmap */ -#define S_CMD_Q_PGMNAME 0x03 /* Query programmer name */ -#define S_CMD_Q_SERBUF 0x04 /* Query Serial Buffer Size */ -#define S_CMD_Q_BUSTYPE 0x05 /* Query supported bustypes */ -#define S_CMD_Q_CHIPSIZE 0x06 /* Query supported chipsize (2^n format) */ -#define S_CMD_Q_OPBUF 0x07 /* Query operation buffer size */ -#define S_CMD_Q_WRNMAXLEN 0x08 /* Query Write to opbuf: Write-N maximum length */ -#define S_CMD_R_BYTE 0x09 /* Read a single byte */ -#define S_CMD_R_NBYTES 0x0A /* Read n bytes */ -#define S_CMD_O_INIT 0x0B /* Initialize operation buffer */ -#define S_CMD_O_WRITEB 0x0C /* Write opbuf: Write byte with address */ -#define S_CMD_O_WRITEN 0x0D /* Write to opbuf: Write-N */ -#define S_CMD_O_DELAY 0x0E /* Write opbuf: udelay */ -#define S_CMD_O_EXEC 0x0F /* Execute operation buffer */ -#define S_CMD_SYNCNOP 0x10 /* Special no-operation that returns NAK+ACK */ -#define S_CMD_Q_RDNMAXLEN 0x11 /* Query read-n maximum length */ -#define S_CMD_S_BUSTYPE 0x12 /* Set used bustype(s). */ -#define S_CMD_O_SPIOP 0x13 /* Perform SPI operation. */ -#define S_CMD_S_SPI_FREQ 0x14 /* Set SPI clock frequency */ +See also serprog.h. Modified: trunk/serprog.c ============================================================================== --- trunk/serprog.c Sat Oct 27 02:06:02 2012 (r1616) +++ trunk/serprog.c Sat Oct 27 02:34:18 2012 (r1617) @@ -38,6 +38,7 @@ #include "flash.h" #include "programmer.h" #include "chipdrivers.h" +#include "serprog.h" #define MSGHEADER "serprog: " @@ -48,30 +49,6 @@ */ static int serprog_shutdown(void *data); -#define S_ACK 0x06 -#define S_NAK 0x15 -#define S_CMD_NOP 0x00 /* No operation */ -#define S_CMD_Q_IFACE 0x01 /* Query interface version */ -#define S_CMD_Q_CMDMAP 0x02 /* Query supported commands bitmap */ -#define S_CMD_Q_PGMNAME 0x03 /* Query programmer name */ -#define S_CMD_Q_SERBUF 0x04 /* Query Serial Buffer Size */ -#define S_CMD_Q_BUSTYPE 0x05 /* Query supported bustypes */ -#define S_CMD_Q_CHIPSIZE 0x06 /* Query supported chipsize (2^n format) */ -#define S_CMD_Q_OPBUF 0x07 /* Query operation buffer size */ -#define S_CMD_Q_WRNMAXLEN 0x08 /* Query opbuf-write-N maximum length */ -#define S_CMD_R_BYTE 0x09 /* Read a single byte */ -#define S_CMD_R_NBYTES 0x0A /* Read n bytes */ -#define S_CMD_O_INIT 0x0B /* Initialize operation buffer */ -#define S_CMD_O_WRITEB 0x0C /* Write opbuf: Write byte with address */ -#define S_CMD_O_WRITEN 0x0D /* Write to opbuf: Write-N */ -#define S_CMD_O_DELAY 0x0E /* Write opbuf: udelay */ -#define S_CMD_O_EXEC 0x0F /* Execute operation buffer */ -#define S_CMD_SYNCNOP 0x10 /* Special no-operation that returns NAK+ACK */ -#define S_CMD_Q_RDNMAXLEN 0x11 /* Query read-n maximum length */ -#define S_CMD_S_BUSTYPE 0x12 /* Set used bustype(s). */ -#define S_CMD_O_SPIOP 0x13 /* Perform SPI operation. */ -#define S_CMD_S_SPI_FREQ 0x14 /* Set SPI clock frequency */ - static uint16_t sp_device_serbuf_size = 16; static uint16_t sp_device_opbuf_size = 300; /* Bitmap of supported commands */ Added: trunk/serprog.h ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/serprog.h Sat Oct 27 02:34:18 2012 (r1617) @@ -0,0 +1,24 @@ +/* According to Serial Flasher Protocol Specification - version 1 */ +#define S_ACK 0x06 +#define S_NAK 0x15 +#define S_CMD_NOP 0x00 /* No operation */ +#define S_CMD_Q_IFACE 0x01 /* Query interface version */ +#define S_CMD_Q_CMDMAP 0x02 /* Query supported commands bitmap */ +#define S_CMD_Q_PGMNAME 0x03 /* Query programmer name */ +#define S_CMD_Q_SERBUF 0x04 /* Query Serial Buffer Size */ +#define S_CMD_Q_BUSTYPE 0x05 /* Query supported bustypes */ +#define S_CMD_Q_CHIPSIZE 0x06 /* Query supported chipsize (2^n format) */ +#define S_CMD_Q_OPBUF 0x07 /* Query operation buffer size */ +#define S_CMD_Q_WRNMAXLEN 0x08 /* Query Write to opbuf: Write-N maximum length */ +#define S_CMD_R_BYTE 0x09 /* Read a single byte */ +#define S_CMD_R_NBYTES 0x0A /* Read n bytes */ +#define S_CMD_O_INIT 0x0B /* Initialize operation buffer */ +#define S_CMD_O_WRITEB 0x0C /* Write opbuf: Write byte with address */ +#define S_CMD_O_WRITEN 0x0D /* Write to opbuf: Write-N */ +#define S_CMD_O_DELAY 0x0E /* Write opbuf: udelay */ +#define S_CMD_O_EXEC 0x0F /* Execute operation buffer */ +#define S_CMD_SYNCNOP 0x10 /* Special no-operation that returns NAK+ACK */ +#define S_CMD_Q_RDNMAXLEN 0x11 /* Query read-n maximum length */ +#define S_CMD_S_BUSTYPE 0x12 /* Set used bustype(s). */ +#define S_CMD_O_SPIOP 0x13 /* Perform SPI operation. */ +#define S_CMD_S_SPI_FREQ 0x14 /* Set SPI clock frequency */ _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
