On Wed, 14 Nov 2012 09:11:10 +0100 Christophe Fauvel <[email protected]> wrote:
> Hello, > > I am using an FT2232H mini module for flashing an AT25DF321A SPI flash > under linux (Ubuntu 10.10, kernel 2.6.35-32-generic), which is supported > according to your Supported Hardware list. I have tested several > flashrom revisions (v0.9.2 pré-compiled, v0.9.5 and V0.9.6.xx compiled > with GCC 4.4.5). > > * with rev0.9.2, the device is listed as UNTESTED when reading, > writing or erasing. I have multiple errors when accessing the device > but I can read, write and erase small amount of data. > > * with rev0.9.5, I also have some issues with the device, but with a > few retries I am able to fully read, write and erase the chip, which > is also listed as UNTESTED. > > * with rev0.9.6, however, the device is listed as Unknown SPI chip > and I cannot access it. it is not listed as unknown, but it is not detected (apparently). actually the chip has been marked as fully tested in 0.9.6 due to this report: http://www.flashrom.org/pipermail/flashrom/2012-July/009492.html from what you write i would assume that you have a bad connection between the programmer and the chip and it does only work by "accident" sometimes. if you believe otherwise please send a verbose log. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
