On Mon, 15 Jul 2013 10:35:02 +0200 Carl-Daniel Hailfinger <[email protected]> wrote:
> Am 10.07.2013 21:17 schrieb Stefan Tauner: > > With every newly supported programmer the information regarding reboots > > on failures becomes more ridiculous. With this patch it is only shown when > > the internal programmer module was selected. > > > > Example outputs for external programmers: > > 1) non-fatal: > > […] > > Reading current flash chip contents... done. FAILED at 0x00000000! > > Expected=0xff, Found=0x28, failed byte count from 0x00000000-0x0001ffff: > > 0x1fde7 > > ERASE FAILED! > > FAILED! > > Uh oh. Erase/write failed. Checking if anything changed. > > Good. It seems nothing was changed. > > Writing to the flash chip apparently didn't do anything. > > Please check the connections (especially those to write protection pins) > > between > > the programmer and the flash chip. If you think the error is caused by > > flashrom > > please report this on IRC at chat.freenode.net (channel #flashrom) or > > mail [email protected], thanks! > > > > 2) fatal: > > […] > > Verifying flash... FAILED at 0x00000000! Expected=0x0f, Found=0xff, failed > > byte count from 0x00000000-0x0001ffff: 0x1fde6 > > Your flash chip is in an unknown state. > > Please report this on IRC at chat.freenode.net (channel #flashrom) or > > mail [email protected], thanks! > > > > Signed-off-by: Stefan Tauner <[email protected]> > > Acked-by: David Hendricks <[email protected]> > > Acked-by: Carl-Daniel Hailfinger <[email protected]> thanks, r1699. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
