On Thu, 22 Aug 2013 17:21:14 -0500 Michael Gardner <[email protected]> wrote:
> I'd like to update the BIOS of an MSI Z87-G43 board, and I'm wondering if > there's anything in the output of flashrom (below) that I should be worried > about. In particular, there's the "SPI Configuration Lockdown" message, and > the fact that the flash chip is referred to as "Opaque". > > Basically, would it be unwise to attempt to flash this BIOS with flashrom? the lockdown just means we are not allowed to change the configuration, but usually we can handle what is there already. the opaque flash chip is a result of the (locked) configuration too... but because there are no other warnings you might actually be lucky and it would work. ;) be sure to use the right input file though and make a backup of the flash contents first. gl > > flashrom v0.9.7-r1711 on Linux 3.2.0-4-amd64 (x86_64) > flashrom is free software, get the source code at http://www.flashrom.org > > Calibrating delay loop... OK. > Found chipset "Intel Z87". > This chipset is marked as untested. If you are using an up-to-date version > of flashrom *and* were (not) able to successfully update your firmware with > it, > then please email a report to [email protected] including a verbose (-V) > log. > Thank you! > Enabling flash write... Warning: SPI Configuration Lockdown activated. > Enabling hardware sequencing because some important opcode is locked. > OK. > Found Programmer flash chip "Opaque flash chip" (8192 kB, > Programmer-specific) at physical address 0x0. > No operations were specified. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
