works when using *gmake* USE_GCC=any
On Sat, Aug 24, 2013 at 4:18 PM, Beeblebrox <[email protected]> wrote: > On Sat, Aug 24, 2013 at 4:02 PM, Stefan Tauner < > [email protected]> wrote: > >> On Sat, 24 Aug 2013 15:12:08 +0300 >> Beeblebrox <[email protected]> wrote: >> >> > Hello. >> > It seems the flash controller on my mobo does not support flashing. >> > "Super I/O ID 0x8726 is not on the list of flash capable controllers" >> > Product page: >> > www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=1089 >> > Output of flashrom -V -p internal attached. >> > Regards. >> >> Hi there, >> >> that line in the log indicates that we have found a chip type that is >> often used to act as flash controller but which is either unsupported >> yet or does not have that functionality at all. This is no problem >> though since your flash is attached differently, namely directly to the >> SB710 chipset and that should work without a problem. I have changed >> the verbosity of the message so that it does not show up in "normal" >> verbose logs and does no longer confuse users. In any case you should >> be able to use flashrom to read and write the flash chip of that board >> unless there are other problems. >> >> If you are familiar with git and compiling I would very much appreciate >> if you could test a patch set for improved AMD support. >> The patches can be found on github. The following commands should grab >> them, compile them, run flashrom and create a log file named >> amd-probe.log (hopefully :) which I would like you to send us back. >> >> git clone https://github.com/stefanct/flashrom.git >> cd flashrom >> git checkout origin/amd -b amd >> make >> ./flashrom -p internal -o amd-probe.log >> > > > Hi - System: FreeBSD_9.2_stable_amd64 > HAVE INSTALLED: > gmake-3.82_1 GNU version of 'make' utility > libpci-3.2.0 PCI configuration space I/O made easy > libpciaccess-0.13.2 Generic PCI access library > > In flashrom folder, # make => > "Makefile", line 59: Missing dependency operator > "Makefile", line 61: Need an operator > "Makefile", line 68: Missing dependency operator > "Makefile", line 71: Need an operator > "Makefile", line 72: Missing dependency operator > "Makefile", line 74: Need an operator > Error expanding embedded variable. > > All these are "ifeq" commands, paired to endif. > Compilers available: clang 3.3, gcc 4.6, gcc 4.2 > make USE_GCC=any gives same result > > Regards. >
_______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
