On Wed, 26 Feb 2014 14:57:32 -0800 Wei Hu <[email protected]> wrote:
> Hi flashrom folks, > > I'm trying to add support for SST26VF064B after I got a patch from Elias. I > made some changes to it after reading the datasheet, but none of the block > erasing commands worked, and I don't know why... I don't see obvious problems either, but I did not read the datasheet. Two things I would check: - is there a write protection pin or register bits that might silently block any modification requests? - is the opcode sequence including wren? (this is probably done automatically by the ichspi driver, but i cant remember the details) And you could test if hardware sequencing (or SFDP) works as a workaround (but I doubt SFDP would behave differently for the lower block sizes and some of them are obviously wrong in the SFDP table anyway (or you have found a bug)). A full verbose log could shed some more light on it too, but I doubt it. If we get this to work we would probably like to commit this patch. For this either of you must sign it off according to http://www.coreboot.org/Development_Guidelines#Sign-off_Procedure -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
