On Tue, 08 Apr 2014 02:55:07 +0400 Владимир Пчелинцев <[email protected]> wrote:
> Hi i try to update BIOS on my PL8820 and see this error > Extracting image > Running install.sh > > BIOS upgrade from B272 to B282. > > *** IMPORTANT *** > > The upgrade will try and power cycle the system the next time a reboot is > scheduled. It's highly recommended to reboot the system after the upgrade > is done. > > Type 'yes' to proceed with BIOS upgrade, or 'no' to abort: yes > flashrom v0.9.6.1-r1627 on Linux 3.4.18-pl-xeon-plos_64 (x86_64) > flashrom is free software, get the source code at http://www.flashrom.org > > Calibrating delay loop... OK. > Found chipset "Intel ICH10R". Enabling flash write... OK. > Found SST flash chip "SST25VF016B" (2048 kB, SPI) at physical address > 0xffe00000 . > Reading old flash chip contents... done. > Erasing and writing flash chip... Erase/write done. > Verifying flash... FAILED at 0x00040030! Expected=0xc3, Found=0xcb, > failed byte count from 0x00000000-0x001fffff: 0x1a3 > Your flash chip is in an unknown state. > Get help on IRC at chat.freenode.net (channel #flashrom) or > mail [email protected] with the subject "FAILED: <your board name>"! > ------------------------------------------------------------------------------- > DO NOT REBOOT OR POWEROFF! > install_firmware: Installation aborted > Firmware upgrade failed > How to fix it. > And more sadly we are power cycle this machine, how to make his alive again. > Thanks > Hello Владимир, is that a Procera platform and does Procera ship flashrom to its customers? I presume you have found an alternative solution already, but in general - if the device does no longer boot after such a failed attempt - you need to use an external programmer to write a working firmware to the chip again. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
