On Tue, 21 Jan 2014 17:30:11 -0500 Elvis Kit <[email protected]> wrote:
> Hello, > > I am getting this error message when i attempt to re-flash the bricked bios > of this motherboard. Any help would be greatly appreciated! > > > e6410 Test # flashrom -p serprog:dev=/dev/ttyACM0:2000000 -w HIB_716.ROM > flashrom v0.9.7-r1764 on Linux 3.2.0-4-486 (i686) > flashrom is free software, get the source code at http://www.flashrom.org > > Calibrating delay loop... OK. > serprog: Programmer name is "serprog-duino" > Found Winbond flash chip "W25Q16.V" (2048 kB, SPI) on serprog. > Reading old flash chip contents... done. > Erasing and writing flash chip... FAILED at 0x00000000! Expected=0xff, > Found=0x00, failed byte count from 0x00000000-0x00000fff: 0x1000 > ERASE FAILED! > Reading current flash chip contents... done. FAILED at 0x00000000! > Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x00007fff: > 0x8000 > ERASE FAILED! > Reading current flash chip contents... Error: invalid response 0x00 from > device > Can't read anymore! Aborting. > FAILED! > Uh oh. Erase/write failed. Checking if anything changed. > Error: invalid response 0x00 from device > Your flash chip is in an unknown state. > Please report this on IRC at chat.freenode.net (channel #flashrom) or > mail [email protected], thanks! > > Thanks in advance! Probably bad wiring. It is also important to connect *all* (input) pins of the flash chip. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
