On Wed, 07 May 2014 17:34:32 +0200 Kristian Rasmussen <[email protected]> wrote:
> Found Macronix flash chip "MX25L8005/MX25V8005" (1024 kB, SPI). > Some block protection in effect, disabling... Block protection could not > be disabled! > Chip status register is 0x9e. > Chip status register: Status Register Write Disable (SRWD, SRP, ...) is set > Chip status register: Bit 6 is not set > Chip status register: Bit 5 is not set > Chip status register: Block Protect 2 (BP2) is set > Chip status register: Block Protect 1 (BP1) is set > Chip status register: Block Protect 0 (BP0) is set > Chip status register: Write Enable Latch (WEL) is set > Chip status register: Write In Progress (WIP/BUSY) is not set Ah I have missed that the first time... we would need to add a small piece of code to toggle a pin to lift that write protection. This is a board-specific routine. Please send us the output of 'lspci -nnvvvxxx'. If there is anyone out there who wants to try to RE the correct board enable, here is the binary: http://ftp.hp.com/pub/softlib/software9/COL21072/pv-55440-1/sp37190.exe -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
