On Wed, 7 Aug 2013 17:07:47 +0200 Stefan Tauner <[email protected]> wrote:
> We are more verbose inside erase_and_write_flash() although it does not > matter as much as here - at the end of the process. > > New output for the non-fatal (i.e. read-protected + successful read) case: > > Reading old flash chip contents... done. > Erasing and writing flash chip... spi_block_erase_d8 failed during command > execution at address 0x8000 > Reading current flash chip contents... done. spi_chip_erase_c7 failed during > command execution > FAILED! > Uh oh. Erase/write failed. Checking if anything has changed. > Reading current flash chip contents... done. > Good. Writing to the flash chip apparently didn't do anything. > Please check the connections (especially those to write protection pins) > between > the programmer and the flash chip. If you think the error is caused by > flashrom > please report this on IRC at chat.freenode.net (channel #flashrom) or > mail [email protected], thanks! > > Signed-off-by: Stefan Tauner <[email protected]> Slightly refined, Acked-by: Stefan Tauner <[email protected]> and committed in r1790. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
