On Mon, Aug 4, 2014 at 7:49 PM, Stefan Tauner <[email protected]> wrote: > On Mon, 4 Aug 2014 19:18:04 -0400 > TR Reardon <...> wrote: > >> cool, just tried and was enable to read the descriptor (64K) and then >> the actual BIOS (6MB). I had to edit out the write-only check in >> cli_classic.c, assumed that was relatively safe. > > I have no idea what you are talking about, sorry. >
Er... flashrom currently only allows using the layout codepaths in write mode; there is a check for this in cli_classic.c, which I disabled. The log I sent previously described two regions, a "descriptor" region at 0-ffff (64K), and the BIOS itself at 200000-7fffff (6M). When I use --verify, unlike --read, it fails. The final line of output (the only difference) is: Verifying flash... FAILED at 0x00000000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x007fffff: 0x7d0bdf Logs attached
P9A-I.layout
Description: Binary data
log_read
Description: Binary data
log_read_hwseq
Description: Binary data
_______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
