On Sun, 28 Sep 2014 15:54:10 +0200 Manuel <[email protected]> wrote:
> I have Tried to flash the w25q32 that is soldered on my motherboard using > raspberry pi. I have verified that alla the connections are right, and i > also have connected wp and hold to vcc. > Also i have used short cables, and i have soldered them directly to the > chip. > Anyway it doesn't recognize the chip If I read that correctly the chip is still soldered to the mainboard (additionally to the programmer wires). In that case #3 from the problems listed at http://flashrom.org/ISP might apply. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
