Hello, I successfully flashed this motherboard with a Winbond flash chip "W39V080FA (1024 kB, FWH)" which is currently tagged as UNTESTED for ERASE and WRITE. http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=3353051
I flashed from BIOS version 1.08 to 1.14 (the last one). Note that the BIOS included some DMI data (SKU number, Serial number, UUID, etc.) which have been deleted during the operation. See dmidecode_before/after log files attached for more information. Here are the logs. Regards. -- Benjamin
# flashrom --programmer internal --verbose --write "BIOS114.ROM" flashrom v0.9.8-r1896 on Linux 3.17.4-301.fc21.x86_64 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.3.0, GCC 4.9.2 20150212 (Red Hat 4.9.2-6), little endian Command line (5 args): flashrom --programmer internal --verbose --write BIOS114.ROM Calibrating delay loop... OS timer resolution is 1 usecs, 896M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1006 us, 10000 myus = 10034 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. Using Internal DMI decoder. DMI string chassis-type: "Desktop" DMI string system-manufacturer: "Hewlett-Packard" DMI string system-product-name: "HP Compaq dx2300 Microtower" DMI string system-version: " " DMI string baseboard-manufacturer: "MSI" DMI string baseboard-product-name: "0A90" DMI string baseboard-version: " " Found chipset "Intel ICH7/ICH7R" with PCI ID 8086:27b8. Enabling flash write... Root Complex Register Block address = 0xfed1c000 GCS = 0x200c64: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x3 (LPC) Top Swap: not enabled 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes SPI Read Configuration: prefetching disabled, caching enabled, BIOS_CNTL = 0x01: BIOS Lock Enable: disabled, BIOS Write Enable: enabled SPIBAR = 0x00007f954b593000 + 0x3020 0x00: 0x0001 (SPIS) 0x02: 0x4360 (SPIC) 0x04: 0x00000000 (SPIA) 0x50: 0x00000000 (BBAR) 0x54: 0x0004 (PREOP) 0x56: 0x0000 (OPTYPE) 0x58: 0x00000005 (OPMENU) 0x5c: 0x00000000 (OPMENU+4) 0x60: 0x00000000 (PBR0) 0x64: 0x00000000 (PBR1) 0x68: 0x00000000 (PBR2) Programming OPCODES... done OK. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 4). Probing for AMIC A25L05PU, 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 4). Probing for AMIC A25L10PT, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 4). Probing for AMIC A25L10PU, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 4). Probing for AMIC A25L20PT, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 4). Probing for AMIC A25L20PU, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 4). Probing for AMIC A25L40PT, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 4). Probing for AMIC A25L40PU, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 4). Probing for AMIC A25L80P, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 4). Probing for AMIC A25L16PT, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 4). Probing for AMIC A25L16PU, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 4). Probing for AMIC A25L512, 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for AMIC A25L010, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for AMIC A25L020, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for AMIC A25L040, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for AMIC A25L080, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for AMIC A25L016, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for AMIC A25L032, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for AMIC A25LQ16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for AMIC A25LQ64, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25DF021, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25DF041A, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25DF081, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25DF081A, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25DF161, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25DF321, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25DF321A, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25DF641(A), 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25DL081, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25DL161, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25DQ161, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25F512, 64 kB: Error: SCIP never cleared! Running OPCODE 0x15 failed (payload length was 2). Probing for Atmel AT25F512A, 64 kB: Error: SCIP never cleared! Running OPCODE 0x15 failed (payload length was 2). Probing for Atmel AT25F512B, 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25F1024(A), 128 kB: Error: SCIP never cleared! Running OPCODE 0x15 failed (payload length was 2). Probing for Atmel AT25F2048, 256 kB: Error: SCIP never cleared! Running OPCODE 0x15 failed (payload length was 2). Probing for Atmel AT25F4096, 512 kB: Error: SCIP never cleared! Running OPCODE 0x15 failed (payload length was 2). Probing for Atmel AT25FS010, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25FS040, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT26DF041, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT26DF081A, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT26DF161, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT26DF161A, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT26F004, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT45CS1282, 16896 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT45DB011D, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT45DB021D, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT45DB041D, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT45DB081D, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT45DB161D, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT45DB321C, 4224 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT45DB321D, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT45DB321E, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT45DB642D, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for ESMT F25L008A, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for ESMT F25L32PA, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B05, 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B05T, 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25P05, 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B10, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B10T, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25P10, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B20, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B20T, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25P20, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B40, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B40T, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25P40, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B80, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B80T, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25P80, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B16T, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25P16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B32, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B32T, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25P32, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B64, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B64T, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25P64, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25F05, 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25F10, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25F20, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25F40, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25F80, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25F16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25F32, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25F64, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25Q40, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25Q80(A), 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25Q16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25Q32(A/B), 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25Q64, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25Q128, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25QH16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25QH32, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25QH64, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25QH128, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25S10, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25S20, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25S40, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25S80, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25S16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25S32, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25S64, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25LQ40, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25LQ80, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25LQ16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25LQ32, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25LQ64(B), 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25LQ128, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25Q512, 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25Q10, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25Q20(B), 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25Q40(B), 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25Q80(B), 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25Q16(B), 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25Q32(B), 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25Q64(B), 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25Q128B, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25T80, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Intel 25F160S33B8, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Intel 25F160S33T8, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Intel 25F320S33B8, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Intel 25F320S33T8, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Intel 25F640S33B8, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Intel 25F640S33T8, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX23L1654, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX23L3254, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX23L6454, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX23L12854, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L2005(C)/MX25L2006E, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L4005(A/C)/MX25L4006E, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L8005/MX25L8006E/MX25L8008E/MX25V8005, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L1605, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L1605A/MX25L1606E/MX25L1608E, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L1605D/MX25L1608D/MX25L1673E, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L1635D, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L1635E, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L3205(A), 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L3206E/MX25L3208E, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L3273E, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L3235D, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L6405, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L6405D, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L6406E/MX25L6408E, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L6436E/MX25L6445E/MX25L6465E/MX25L6473E, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L12805D, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L12835F/MX25L12845E/MX25L12865E, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25U1635E, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25U3235E/F, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25U6435E/F, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25U12835F, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L6495F, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25P05-A, 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25P05, 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Error: SCIP never cleared! Running OPCODE 0x90 failed at address 0x000000 (payload length was 2). Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 1). Probing for Micron/Numonyx/ST M25P10-A, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25P10, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Error: SCIP never cleared! Running OPCODE 0x90 failed at address 0x000000 (payload length was 2). Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 1). Probing for Micron/Numonyx/ST M25P20, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Error: SCIP never cleared! Running OPCODE 0x90 failed at address 0x000000 (payload length was 2). Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 1). Probing for Micron/Numonyx/ST M25P40, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Error: SCIP never cleared! Running OPCODE 0x90 failed at address 0x000000 (payload length was 2). Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 1). Probing for Micron/Numonyx/ST M25P80, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25P16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25P32, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25P64, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25P128, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25PE10, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25PE20, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25PE40, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25PE80, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25PE16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25PX80, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25PX16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25PX32, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25PX64, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M45PE10, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M45PE20, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M45PE40, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M45PE80, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M45PE16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST N25Q016, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Nantronics N25S10, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Nantronics N25S20, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Nantronics N25S40, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Nantronics N25S80, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Nantronics N25S16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LD256C, 32 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LD512(C), 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LD010(C), 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LD020(C), 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LD040(C), 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LQ020, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LQ040, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LQ080, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LQ016, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LQ032C, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LV512(A), 64 kB: Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 2). Probing for PMC Pm25LV010, 128 kB: Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 2). Probing for PMC Pm25LV010A, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LV020, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LV040, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LV080B, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LV016B, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Sanyo LE25FW106, 128 kB: Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 2). Probing for Sanyo LE25FW406A, 512 kB: Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 2). Probing for Sanyo LE25FU406B, 512 kB: Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 2). Probing for Sanyo LE25FW203A, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Sanyo LE25FW403A, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Sanyo LE25FW418A, 512 kB: Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 2). Probing for Sanyo LE25FW806, 1024 kB: Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 2). Probing for Sanyo LE25FW808, 1024 kB: Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 2). Probing for Spansion S25FL004A, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL008A, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL016A, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL032A/P, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL064A/P, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL204K, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL208K, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL116K/S25FL216K, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL132K, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL164K, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL127S-64kB, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL127S-256kB, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL128P......0, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL128P......1, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL128S......0, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL128S......1, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL129P......0, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL129P......1, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for SST SST25LF020A, 256 kB: Error: SCIP never cleared! Running OPCODE 0x90 failed at address 0x000000 (payload length was 2). Probing for SST SST25LF040A, 512 kB: Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 2). Probing for SST SST25LF080(A), 1024 kB: Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 2). Probing for SST SST25VF512(A), 64 kB: Error: SCIP never cleared! Running OPCODE 0x90 failed at address 0x000000 (payload length was 2). Probing for SST SST25VF010(A), 128 kB: Error: SCIP never cleared! Running OPCODE 0x90 failed at address 0x000000 (payload length was 2). Probing for SST SST25VF020, 256 kB: Error: SCIP never cleared! Running OPCODE 0x90 failed at address 0x000000 (payload length was 2). Probing for SST SST25VF020B, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for SST SST25VF040, 512 kB: Error: SCIP never cleared! Running OPCODE 0x90 failed at address 0x000000 (payload length was 2). Probing for SST SST25VF040B, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for SST SST25VF040B.REMS, 512 kB: Error: SCIP never cleared! Running OPCODE 0x90 failed at address 0x000000 (payload length was 2). Probing for SST SST25VF080B, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for SST SST25VF016B, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for SST SST25VF032B, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for SST SST25VF064C, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for SST SST25WF512, 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for SST SST25WF010, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for SST SST25WF020, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for SST SST25WF040, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for SST SST25WF080, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25Q40.V, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25Q80.V, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25Q16.V, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25Q32.V, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25Q64.V, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25Q128.V, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25Q20.W, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25Q40.W, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25Q80.W, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25Q16.W, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25Q32.W, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25Q64.W, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25X10, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25X20, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25X40, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25X80, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25X16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25X32, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25X64, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Unknown SFDP-capable chip, 0 kB: Error: SCIP never cleared! Running OPCODE 0x5a failed at address 0x000000 (payload length was 3). Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 4). Probing for Atmel unknown Atmel SPI chip, 0 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon unknown Eon SPI chip, 0 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix unknown Macronix SPI chip, 0 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC unknown PMC SPI chip, 0 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for SST unknown SST SPI chip, 0 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for ST unknown ST SPI chip, 0 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Sanyo unknown Sanyo SPI chip, 0 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Generic unknown SPI chip (RDID), 0 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Generic unknown SPI chip (REMS), 0 kB: Error: SCIP never cleared! Running OPCODE 0x90 failed at address 0x000000 (payload length was 2). Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH00B4, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH004, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xda, id2 0xd3 Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xda, id2 0xd3 Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xda, id2 0xd3 Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xda, id2 0xd3 Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xda, id2 0xd3 Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xda, id2 0xd3 Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xda, id2 0xd3 Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xda, id2 0xd3 Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xda, id2 0xd3 Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xda, id2 0xd3 Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xda, id2 0xd3 Found Winbond flash chip "W39V080FA" (1024 kB, FWH) mapped at physical address 0x00000000fff00000. Lockout bits: Hardware bootblock locking (#TBL) is not active. Hardware remaining chip locking (#WP) is not active.. Lock status of block at 0x00007f9549292002 is Full Access. Lock status of block at 0x00007f95492a2002 is Full Access. Lock status of block at 0x00007f95492b2002 is Full Access. Lock status of block at 0x00007f95492c2002 is Full Access. Lock status of block at 0x00007f95492d2002 is Full Access. Lock status of block at 0x00007f95492e2002 is Full Access. Lock status of block at 0x00007f95492f2002 is Full Access. Lock status of block at 0x00007f9549302002 is Full Access. Lock status of block at 0x00007f9549312002 is Full Access. Lock status of block at 0x00007f9549322002 is Full Access. Lock status of block at 0x00007f9549332002 is Full Access. Lock status of block at 0x00007f9549342002 is Full Access. Lock status of block at 0x00007f9549352002 is Full Access. Lock status of block at 0x00007f9549362002 is Full Access. Lock status of block at 0x00007f9549372002 is Full Access. Lock status of block at 0x00007f9549382002 is Full Access. Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xda, id2 0xd3 Found Winbond flash chip "W39V080FA" (1024 kB, FWH). === This flash part has status UNTESTED for operations: ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom@flashrom.org if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x00ffff:EW, 0x010000-0x01ffff:EW, 0x020000-0x02ffff:EW, 0x030000-0x03ffff:EW, 0x040000-0x04ffff:EW, 0x050000-0x05ffff:EW, 0x060000-0x06ffff:S, 0x070000-0x07ffff:S, 0x080000-0x08ffff:S, 0x090000-0x09ffff:S, 0x0a0000-0x0affff:S, 0x0b0000-0x0bffff:S, 0x0c0000-0x0cffff:S, 0x0d0000-0x0dffff:EW, 0x0e0000-0x0effff:EW, 0x0f0000-0x0fffff:EW Erase/write done. Verifying flash... VERIFIED. Restoring MMIO space at 0x7f954b596070 Restoring MMIO space at 0x7f954b59607c Restoring MMIO space at 0x7f954b596078 Restoring MMIO space at 0x7f954b596076 Restoring MMIO space at 0x7f954b596074 Restoring PCI config space for 00:1f:0 reg 0xdc
00:00.0 Host bridge [0600]: Intel Corporation 82946GZ/PL/GL Memory Controller Hub [8086:2970] (rev 02) Subsystem: Intel Corporation 82946GZ/PL/GL Memory Controller Hub [8086:2970] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=09 <?> Kernel driver in use: agpgart-intel 00: 86 80 70 29 06 00 90 20 02 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 70 29 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 40: 01 90 d1 fe 00 00 00 00 00 40 d1 fe 00 00 00 00 50: 00 00 30 00 0b 00 00 00 00 00 00 00 00 00 00 00 60: 01 00 00 e0 00 00 00 00 01 80 d1 fe 00 00 00 00 70: 01 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 30 11 11 00 00 00 00 00 ff 03 00 00 00 1a 79 00 a0: 20 00 00 08 00 00 80 7f 00 00 00 00 00 00 70 7f b0: 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 49 00 00 00 00 00 00 13 e0: 09 00 09 91 68 03 00 cb a7 5c 00 00 00 00 00 00 f0: 02 00 00 00 00 00 00 00 90 0f 04 00 00 00 00 00 00:01.0 PCI bridge [0604]: Intel Corporation 82946GZ/PL/GL PCI Express Root Port [8086:2971] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 24 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [88] Subsystem: Intel Corporation Device [8086:0000] Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 41a1 Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending+ InProgress- Capabilities: [140 v1] Root Complex Link Desc: PortNumber=02 ComponentID=01 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed19000 Kernel driver in use: pcieport Kernel modules: shpchp 00: 86 80 71 29 07 04 10 00 02 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 d0 d0 00 00 20: e0 fd e0 fd d1 fd d1 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 88 00 00 00 00 00 00 00 07 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 80: 01 90 03 c8 08 00 00 00 0d 80 00 00 86 80 00 00 90: 05 a0 01 00 0c 30 e0 fe a1 41 00 00 00 00 00 00 a0: 10 00 41 01 00 80 00 00 00 00 00 00 01 4d 01 02 b0: 10 00 01 10 00 00 04 00 c0 01 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 f0: 00 00 01 00 03 e1 3f 00 90 0f 04 00 00 00 00 00 00:02.0 VGA compatible controller [0300]: Intel Corporation 82946GZ/GL Integrated Graphics Controller [8086:2972] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7336] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 25 Region 0: Memory at fda00000 (32-bit, non-prefetchable) [size=1M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at ff00 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 4122 Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: i915 Kernel modules: i915 00: 86 80 72 29 07 04 90 00 02 00 00 03 00 00 00 00 10: 00 00 a0 fd 00 00 00 00 0c 00 00 d0 00 00 00 00 20: 01 ff 00 00 00 00 00 00 00 00 00 00 62 14 36 73 30: 00 00 00 00 90 00 00 00 00 00 00 00 07 01 00 00 40: 00 00 00 00 e0 00 00 00 09 00 09 91 68 03 00 cb 50: a7 5c 30 00 0b 00 00 00 00 00 00 00 00 00 80 7f 60: 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 05 d0 01 00 0c 30 e0 fe 22 41 00 00 00 00 00 00 a0: 11 11 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 07 07 03 0e 80 00 08 04 f4 01 00 00 d0: 01 00 22 00 00 00 00 00 00 00 00 00 00 01 02 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 34 00 03 00 00 00 00 00 90 0f 04 00 00 00 00 00 00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7336] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 26 Region 0: Memory at fdff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 4142 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80 Status: NegoPending- InProgress- Capabilities: [130 v1] Root Complex Link Desc: PortNumber=0f ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00: 86 80 d8 27 06 04 10 00 01 00 03 04 10 00 00 00 10: 04 80 ff fd 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 36 73 30: 00 00 00 00 50 00 00 00 00 00 00 00 07 01 00 00 40: 03 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 60 42 c8 00 00 00 00 00 00 00 00 00 00 00 00 60: 05 70 81 00 0c 30 e0 fe 00 00 00 00 42 41 00 00 70: 10 00 91 00 00 00 00 00 00 08 10 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00 00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7336] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at fe00 [size=32] Kernel driver in use: uhci_hcd 00: 86 80 c8 27 05 00 80 02 01 00 03 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 fe 00 00 00 00 00 00 00 00 00 00 62 14 36 73 30: 00 00 00 00 00 00 00 00 00 00 00 00 03 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 01 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00 00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7336] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at fd00 [size=32] Kernel driver in use: uhci_hcd 00: 86 80 c9 27 05 00 80 02 01 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 fd 00 00 00 00 00 00 00 00 00 00 62 14 36 73 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 01 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00 00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7336] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at fc00 [size=32] Kernel driver in use: uhci_hcd 00: 86 80 ca 27 05 00 80 02 01 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 fc 00 00 00 00 00 00 00 00 00 00 62 14 36 73 30: 00 00 00 00 00 00 00 00 00 00 00 00 04 03 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 01 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00 00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7336] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at fb00 [size=32] Kernel driver in use: uhci_hcd 00: 86 80 cb 27 05 00 80 02 01 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 fb 00 00 00 00 00 00 00 00 00 00 62 14 36 73 30: 00 00 00 00 00 00 00 00 00 00 00 00 07 04 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 01 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00 00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7336] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci-pci 00: 86 80 cc 27 06 00 90 02 01 20 03 0c 00 00 00 00 10: 00 f0 ff fd 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 36 73 30: 00 00 00 00 50 00 00 00 00 00 00 00 03 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 00 c2 c9 00 00 00 00 0a 00 a0 20 00 00 00 00 60: 20 20 ff 01 00 00 00 00 01 00 00 00 00 00 00 c0 70: 00 00 d5 3f 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 11 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 aa ff 00 ff 00 ff 00 20 00 00 88 e0: 00 00 00 00 db b6 6d 00 00 00 00 00 00 00 00 00 f0: 00 80 00 09 88 85 40 00 86 0f 01 00 86 17 02 20 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7336] 00: 86 80 4e 24 07 00 10 00 e1 01 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 20 e0 e0 80 22 20: c0 fd c0 fd b1 fd b1 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 12 00 00 50: 0d 00 00 00 62 14 36 73 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7336] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel driver in use: lpc_ich Kernel modules: intel_rng, lpc_ich, leds_ss4200 00: 86 80 b8 27 07 01 10 02 01 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 36 73 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 40: 01 04 00 00 80 00 00 00 81 04 00 00 10 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 87 80 84 8a d0 00 00 00 85 80 80 83 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 08 34 91 02 1c 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 20 02 00 00 08 00 00 00 13 00 00 00 00 03 00 00 b0: 00 00 f0 00 00 00 00 00 55 55 56 55 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 33 22 11 00 67 45 00 00 c0 c0 00 00 00 00 00 00 e0: 09 00 0c 10 a8 00 24 00 00 00 00 00 00 00 00 00 f0: 01 c0 d1 fe 00 00 00 00 86 0f 01 00 00 00 00 00 00:1f.2 IDE interface [0101]: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] [8086:27c0] (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7336] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 Region 4: I/O ports at fa00 [size=16] Region 5: Memory at fdffe000 (32-bit, non-prefetchable) [size=1K] Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ata_piix Kernel modules: pata_acpi, ata_generic 00: 86 80 c0 27 07 00 b0 02 01 8a 01 01 00 00 00 00 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 20: 01 fa 00 00 00 e0 ff fd 00 00 00 00 62 14 36 73 30: 00 00 00 00 70 00 00 00 00 00 00 00 00 02 00 00 40: 07 a3 07 a3 00 00 00 00 05 00 01 01 00 00 00 00 50: 00 00 00 00 00 50 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 01 00 02 40 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 3f 00 80 03 80 40 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 05 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00 00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 01) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7336] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 0500 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 00: 86 80 da 27 01 00 80 02 01 00 05 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 05 00 00 00 00 00 00 00 00 00 00 62 14 36 73 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00 02:08.0 Ethernet controller [0200]: Intel Corporation NM10/ICH7 Family LAN Controller [8086:27dc] (rev 01) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:336c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at fdcff000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at ef00 [size=64] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME- Kernel driver in use: e100 Kernel modules: e100 00: 86 80 dc 27 07 00 90 02 01 00 00 02 10 40 00 00 10: 00 f0 cf fd 01 ef 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 6c 33 30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 08 38 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 22 fe e0: 00 40 00 3a 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00
superiotool r6543 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xc400, id=0x23a0 Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8502e) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=standard) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8502e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8502e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xa023, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x164e... Failed. Returned data: port=0xff, port+1=0xff Probing for Nuvoton Super I/O at 0x164e... Failed. Returned data: chip_id=0xffff Probing for Nuvoton Super I/O (sid=0xfc) at 0x164e... Failed. Returned data: sid=0xff, id=0xffff, rev=0x00 Probing for Nuvoton Super I/O at 0x2e... Failed. Returned data: chip_id=0xffff Probing for Nuvoton Super I/O (sid=0xfc) at 0x2e... Failed. Returned data: sid=0xff, id=0xffff, rev=0x00 Probing for Nuvoton Super I/O at 0x4e... Failed. Returned data: chip_id=0xa023 Probing for Nuvoton Super I/O (sid=0xfc) at 0x4e... Failed. Returned data: sid=0xff, id=0xa023, rev=0x00 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Found Winbond W83627DHG (id=0xa0, rev=0x23) at 0x4e Register dump: idx 02 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f val ff a0 23 ff 00 c4 00 40 ff 50 00 7c c0 03 21 00 ff def 00 a0 NA ff 00 MM 00 MM RR 50 00 00 RR e2 21 00 00 LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 f2 f4 f5 val 00 00 00 00 00 0e 00 ff 00 00 def 01 03 f0 06 02 8e 00 ff 00 00 LDN 0x01 (Parallel port) idx 30 60 61 70 74 f0 val 00 00 00 00 03 3b def 01 03 78 07 04 3f LDN 0x02 (COM1) idx 30 60 61 70 f0 val 00 00 00 00 00 def 01 03 f8 04 00 LDN 0x03 (COM2) idx 30 60 61 70 f0 f1 val 00 00 00 00 00 00 def 01 02 f8 03 00 00 LDN 0x05 (Keyboard) idx 30 60 61 62 63 70 72 f0 val 01 00 60 00 64 01 0c 80 def 01 00 60 00 64 01 0c 83 LDN 0x06 (Serial peripheral interface) idx 30 62 63 val 00 ff ff def 00 00 00 LDN 0x07 (GPIO 6) idx 30 f4 f5 f6 f7 val 07 ff ff ff ff def 00 ff 00 00 00 LDN 0x08 (WDTO#, PLED) idx 30 f5 f6 f7 val 00 ff 00 ff def 00 00 00 00 LDN 0x09 (GPIO 2, GPIO 3, GPIO 4, GPIO 5) idx 30 e0 e1 e2 e3 e4 e5 e6 e7 e8 e9 f0 f1 f2 f3 f4 f5 f6 f7 fe val 00 ff ff ff ff ff ff ff ff ff ff ff ff ff 09 ff ff ff ff ff def 00 ff 00 00 ff 00 00 00 00 00 00 ff 00 00 00 ff 00 00 00 00 LDN 0x0a (ACPI) idx 30 70 e0 e1 e2 e3 e4 e5 e6 e7 e8 e9 f2 f3 f4 f6 f7 fe val 00 00 01 00 47 26 20 00 00 01 09 00 0a 00 00 00 00 00 def 00 00 01 00 ff 08 00 RR 1c 00 RR RR 7c 00 00 00 00 00 LDN 0x0b (Hardware monitor) idx 30 60 61 70 f0 f1 f2 val 01 02 90 00 81 ff 81 def 00 00 00 00 81 00 00 LDN 0x0c (PECI, SST) idx e0 e1 e2 e3 e4 e5 e8 f1 fe ff val 00 48 48 48 48 00 00 48 ff ff def 00 48 48 48 48 00 00 48 00 00 Hardware monitor (0x0295) Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for VIA Super I/O at 0x3f0... PCI device 1106:0686 not found. Probing for Server Engines Super I/O at 0x2e... Failed. Returned data: id=0xffff, rev=0xff
# dmidecode 2.12 SMBIOS 2.4 present. 34 structures occupying 995 bytes. Table at 0x000F0000. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: Phoenix Technologies, LTD Version: MS7336 1.08 Release Date: 05/25/2007 Address: 0xE0000 Runtime Size: 128 kB ROM Size: 512 kB Characteristics: ISA is supported PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/360 kB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Function key-initiated network boot is supported Targeted content distribution is supported BIOS Revision: 1.8 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Hewlett-Packard Product Name: HP Compaq dx2300 Microtower Version: Serial Number: CZC7410Y9C UUID: 800BEEEA-36E3-1210-A3C3-D9F9FB778F77 Wake-up Type: Power Switch SKU Number: GQ952ES#ABF Family: 103C_53307F Handle 0x0002, DMI type 2, 10 bytes Base Board Information Manufacturer: MSI Product Name: 0A90 Version: Serial Number: Asset Tag: Features: Board is a hosting board Handle 0x0003, DMI type 3, 17 bytes Chassis Information Manufacturer: MSI Type: Desktop Lock: Not Present Version: Serial Number: Asset Tag: CZC7410Y9C Boot-up State: Unknown Power Supply State: Unknown Thermal State: Unknown Security Status: Unknown OEM Information: 0x00000000 Handle 0x0004, DMI type 4, 35 bytes Processor Information Socket Designation: Socket 775 Type: Central Processor Family: Pentium D Manufacturer: Intel ID: FD 06 00 00 FF FB EB BF Signature: Type 0, Family 6, Model 15, Stepping 13 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Multi-threading) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Intel(R) Pentium(R) Dual Voltage: 0.0 V External Clock: 200 MHz Max Speed: 4000 MHz Current Speed: 1800 MHz Status: Populated, Enabled Upgrade: ZIF Socket L1 Cache Handle: 0x0008 L2 Cache Handle: 0x0009 L3 Cache Handle: Not Provided Serial Number: Asset Tag: Part Number: Handle 0x0005, DMI type 5, 20 bytes Memory Controller Information Error Detecting Method: 8-bit Parity Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 4096 MB Maximum Total Memory Size: 8192 MB Supported Speeds: Other Supported Memory Types: DIMM Memory Module Voltage: 5.0 V Associated Memory Slots: 2 0x0006 0x0007 Enabled Error Correcting Capabilities: None Handle 0x0006, DMI type 6, 12 bytes Memory Module Information Socket Designation: A0 Bank Connections: 0 1 Current Speed: Unknown Type: DIMM Installed Size: 2048 MB (Double-bank Connection) Enabled Size: 2048 MB (Double-bank Connection) Error Status: OK Handle 0x0007, DMI type 6, 12 bytes Memory Module Information Socket Designation: A1 Bank Connections: None Current Speed: Unknown Type: Unknown Installed Size: Not Installed Enabled Size: Not Installed Error Status: OK Handle 0x0008, DMI type 7, 19 bytes Cache Information Socket Designation: Internal Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 32 kB Maximum Size: 32 kB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x0009, DMI type 7, 19 bytes Cache Information Socket Designation: External Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: External Installed Size: 1024 kB Maximum Size: 1024 kB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: FDD Internal Connector Type: On Board Floppy External Reference Designator: Not Specified External Connector Type: None Port Type: 8251 FIFO Compatible Handle 0x000B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: COM1 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x000C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: COM2 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x000D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: LPT1 Internal Connector Type: DB-25 female External Reference Designator: External Connector Type: DB-25 female Port Type: Parallel Port ECP/EPP Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Keyboard Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Keyboard Port Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: PS/2 Mouse Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Mouse Port Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB0 External Connector Type: Other Port Type: USB Handle 0x0011, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB1 External Connector Type: Other Port Type: USB Handle 0x0012, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB2 External Connector Type: Other Port Type: USB Handle 0x0013, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB3 External Connector Type: Other Port Type: USB Handle 0x0014, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: VIDEO External Connector Type: DB-15 female Port Type: Video Port Handle 0x0015, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: ETHERNET External Connector Type: RJ-45 Port Type: Network Port Handle 0x0016, DMI type 9, 13 bytes System Slot Information Designation: PCI0 Type: 32-bit PCI Current Usage: Available Length: Long ID: 1 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0017, DMI type 13, 22 bytes BIOS Language Information Language Description Format: Long Installable Languages: 3 n|US|iso8859-1 n|US|iso8859-1 r|CA|iso8859-1 Currently Installed Language: n|US|iso8859-1 Handle 0x0018, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 4 GB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x0019, DMI type 17, 27 bytes Memory Device Array Handle: 0x0018 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: None Locator: A0 Bank Locator: Bank0/1 Type: DDR2 Type Detail: Synchronous Speed: 667 MHz Manufacturer: None Serial Number: None Asset Tag: None Part Number: None Handle 0x001A, DMI type 17, 27 bytes Memory Device Array Handle: 0x0018 Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: None Locator: A1 Bank Locator: Bank2/3 Type: Unknown Type Detail: Unknown Speed: Unknown Manufacturer: None Serial Number: None Asset Tag: None Part Number: None Handle 0x001B, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Array Handle: 0x0018 Partition Width: 1 Handle 0x001C, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Device Handle: 0x0019 Memory Array Mapped Address Handle: 0x001B Partition Row Position: 1 Handle 0x001D, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Device Handle: 0x001A Memory Array Mapped Address Handle: 0x001B Partition Row Position: 1 Handle 0x001E, DMI type 32, 11 bytes System Boot Information Status: No errors detected Handle 0x001F, DMI type 11, 5 bytes OEM Strings String 1: 17101418 Handle 0x0020, DMI type 208, 5 bytes OEM-specific Type Header and Data: D0 05 20 00 00 Handle 0x0021, DMI type 127, 4 bytes End Of Table
# dmidecode 2.12 SMBIOS 2.4 present. 34 structures occupying 933 bytes. Table at 0x000F0000. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: Phoenix Technologies, LTD Version: MS7336 1.14 Release Date: 11/24/2008 Address: 0xE0000 Runtime Size: 128 kB ROM Size: 512 kB Characteristics: ISA is supported PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/360 kB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Function key-initiated network boot is supported Targeted content distribution is supported BIOS Revision: 1.14 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Hewlett-Packard Product Name: Version: Serial Number: UUID: Not Present Wake-up Type: Power Switch SKU Number: Family: 103C_53307F Handle 0x0002, DMI type 2, 10 bytes Base Board Information Manufacturer: MSI Product Name: 0A90 Version: Serial Number: Asset Tag: Features: Board is a hosting board Handle 0x0003, DMI type 3, 17 bytes Chassis Information Manufacturer: MSI Type: Desktop Lock: Not Present Version: Serial Number: Asset Tag: Boot-up State: Unknown Power Supply State: Unknown Thermal State: Unknown Security Status: Unknown OEM Information: 0x00000000 Handle 0x0004, DMI type 4, 35 bytes Processor Information Socket Designation: Socket 775 Type: Central Processor Family: Pentium D Manufacturer: Intel ID: FD 06 00 00 FF FB EB BF Signature: Type 0, Family 6, Model 15, Stepping 13 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Multi-threading) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Intel(R) Pentium(R) Dual Voltage: 0.0 V External Clock: 200 MHz Max Speed: 4000 MHz Current Speed: 1800 MHz Status: Populated, Enabled Upgrade: ZIF Socket L1 Cache Handle: 0x0008 L2 Cache Handle: 0x0009 L3 Cache Handle: Not Provided Serial Number: Asset Tag: Part Number: Handle 0x0005, DMI type 5, 20 bytes Memory Controller Information Error Detecting Method: 8-bit Parity Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 4096 MB Maximum Total Memory Size: 8192 MB Supported Speeds: Other Supported Memory Types: DIMM Memory Module Voltage: 5.0 V Associated Memory Slots: 2 0x0006 0x0007 Enabled Error Correcting Capabilities: None Handle 0x0006, DMI type 6, 12 bytes Memory Module Information Socket Designation: A0 Bank Connections: 0 1 Current Speed: Unknown Type: DIMM Installed Size: 2048 MB (Double-bank Connection) Enabled Size: 2048 MB (Double-bank Connection) Error Status: OK Handle 0x0007, DMI type 6, 12 bytes Memory Module Information Socket Designation: A1 Bank Connections: None Current Speed: Unknown Type: Unknown Installed Size: Not Installed Enabled Size: Not Installed Error Status: OK Handle 0x0008, DMI type 7, 19 bytes Cache Information Socket Designation: Internal Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 32 kB Maximum Size: 32 kB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x0009, DMI type 7, 19 bytes Cache Information Socket Designation: External Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: External Installed Size: 1024 kB Maximum Size: 1024 kB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: FDD Internal Connector Type: On Board Floppy External Reference Designator: Not Specified External Connector Type: None Port Type: 8251 FIFO Compatible Handle 0x000B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: COM1 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x000C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: COM2 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x000D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: LPT1 Internal Connector Type: DB-25 female External Reference Designator: External Connector Type: DB-25 female Port Type: Parallel Port ECP/EPP Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Keyboard Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Keyboard Port Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: PS/2 Mouse Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Mouse Port Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB0 External Connector Type: Other Port Type: USB Handle 0x0011, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB1 External Connector Type: Other Port Type: USB Handle 0x0012, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB2 External Connector Type: Other Port Type: USB Handle 0x0013, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB3 External Connector Type: Other Port Type: USB Handle 0x0014, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: VIDEO External Connector Type: DB-15 female Port Type: Video Port Handle 0x0015, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: ETHERNET External Connector Type: RJ-45 Port Type: Network Port Handle 0x0016, DMI type 9, 13 bytes System Slot Information Designation: PCI0 Type: 32-bit PCI Current Usage: Available Length: Long ID: 1 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0017, DMI type 13, 22 bytes BIOS Language Information Language Description Format: Long Installable Languages: 3 n|US|iso8859-1 n|US|iso8859-1 r|CA|iso8859-1 Currently Installed Language: n|US|iso8859-1 Handle 0x0018, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 4 GB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x0019, DMI type 17, 27 bytes Memory Device Array Handle: 0x0018 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: None Locator: A0 Bank Locator: Bank0/1 Type: DDR2 Type Detail: Synchronous Speed: 667 MHz Manufacturer: None Serial Number: None Asset Tag: None Part Number: None Handle 0x001A, DMI type 17, 27 bytes Memory Device Array Handle: 0x0018 Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: None Locator: A1 Bank Locator: Bank2/3 Type: Unknown Type Detail: Unknown Speed: Unknown Manufacturer: None Serial Number: None Asset Tag: None Part Number: None Handle 0x001B, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Array Handle: 0x0018 Partition Width: 1 Handle 0x001C, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Device Handle: 0x0019 Memory Array Mapped Address Handle: 0x001B Partition Row Position: 1 Handle 0x001D, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Device Handle: 0x001A Memory Array Mapped Address Handle: 0x001B Partition Row Position: 1 Handle 0x001E, DMI type 32, 11 bytes System Boot Information Status: No errors detected Handle 0x001F, DMI type 11, 5 bytes OEM Strings String 1: Handle 0x0020, DMI type 208, 5 bytes OEM-specific Type Header and Data: D0 05 20 00 00 Handle 0x0021, DMI type 127, 4 bytes End Of Table
_______________________________________________ flashrom mailing list flashrom@flashrom.org http://www.flashrom.org/mailman/listinfo/flashrom
