On Fri, 1 Jan 2016 16:18:17 +0300 Andrey Korolyov <[email protected]> wrote:
> Hello and Happy New Year, > > a couple of days ago I acquired an old GeodeLX-based thin client > TONK-1202/ТОНК-1202 (cyr) for a purpose to put coreboot on it, because > board is very simular to existing ones in the coreboot tree and there > should be no big deal to make a port. Aside from very funny issue that > I am not able to boot modern 2.6.18+ i386 Linux kernel on it (ALIX > Geode board said to have same issue [0], but it has been reportedly > fixed by a vendor bios update), all other Linux variants (2.4.xx and > 2.6.13) and NetBSD 7.0 are somehow messing with the internal > interface, with no positive outcome as a result: > > ./flashrom -p internal:laptop=this_is_not_a_laptop -c W39V040FB -r bios.bin -V > .... > Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x25, > id2 0x6b, id1 is normal flash content, id2 is normal flash content > No EEPROM/flash device found > ... > > > NetBSD 5.1 with same flashrom version working just well, I was able to > read the chip contents and write them back without any issues. This is > not a blocker, as I would stick to the external programmer anyway, but > probably worth investigating as a regression - monolithic nature of > NetBSD releases and very limited board performance would not allow to > bisect this easily, so it`s better to narrow a debug field, if > possible, in advance. Hi Andrey, please post complete logs of a working and non-working probe as well as the exact flashrom version you are using. The output of lspci -nnv might become handy as well. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
