Author: stefanct Date: Sat Jan 23 17:16:49 2016 New Revision: 1917 URL: http://flashrom.org/trac/flashrom/changeset/1917
Log: Add a bunch of new/tested stuff and various small changes 24. Tested mainboards: OK: - ASRock G31M-GS Reported by Александр Трубицын - ASRock G41M-VS3 Reported by Александр Трубицын - ASRock N68C-S UCC Reported by Alexey Belyaev - ASRock AMCP7AION-HT (ION 330HT(-BD)) Reported by Stefan Tauner - ASUS P5K SE Reported by Александр Трубицын - ASUS P5KPL-VM Reported by Marin Vlah - ASUS RAMPAGE III GENE Reported by stevessss on IRC - GIGABYTE GA-945GM-S2 Reported by Александр Трубицын - GIGABYTE GA-945GCM-S2 (rev. 3.0) Reported by Александр Трубицын - GIGABYTE GA-965P-S3 Reported by Александр Трубицын - GIGABYTE GA-EG43M-S2H Reported by Александр Трубицын - GIGABYTE GA-EP31-DS3L (rev. 1.0) Reported by Александр Трубицын - GIGABYTE GA-G33M-S2 Reported by Александр Трубицын - GIGABYTE GA-G33M-S2L Reported by Александр Трубицын - GIGABYTE GA-H55M-S2 Reported by Александр Трубицын - GIGABYTE GA-J1900N-D3V Reported by Marcos Truchado and Guillermo von Hünefeld - GIGABYTE GA-K8NS Reported by nicolae788 - GIGABYTE GA-M56S-S3 Reported by Estevo Paz Freire - GIGABYTE GA-P31-DS3L Reported by Александр Трубицын - GIGABYTE GA-P31-S3G Reported by Александр Трубицын - MSI MS-7336 Reported by Benjamin Bellec - MSI X79A-GD45 (8D) (MS-7760)" Reported by mortehu on IRC - Supermicro A1SAi-2550F Reported by Bernard Grymonpon - Supermicro X7DWT Reported by Steven Stremciuc Laptop: - ASUS U38N Reported by Ultra on IRC - Dell Latitude D630 Reported by Márton Miklós - Fujitsu Amilo Xi 3650 Reported by Elmar Stellnberger - Lenovo T400 (whitelisting only) Chipsets: - Mark 8086:1f38 (Intel Avoton/Rangeley) as tested Reported by Jeremy Porter and Bernard Grymonpon - Add Intel Sunrise Point IDs but no support yet. Flash chips: - Atmel AT45DB321D to PREW (+PREW) Reported by The Raven - Eon EN25QH32 to PREW (+PREW) Reported by Josua Mayer - Eon EN25QH64 to PREW (+EW) Reported by David s. Alessio - GigaDevice GD25LQ64(B) to PREW (+PREW) Reported by Greg Tippit - Intel 28F001BN/BX-T to PREW (+EW) Reported by Lu Xie - Micron M25P10-A to PREW (+W) Reported by the Raven - Micron M25PE40 Reported by David Wood - Micron N25Q128..3E to PREW (+PREW) Reported by Miklós Márton - Macronix MX25L3273E to PREW (+PREW) Reported by Roklobsta on IRC - Macronix MX23L6454 to PR (+PR) Reported by Steven Honeyman - Macronix MX25U6435E/F to PREW (+PREW) Reported by Marcos Truchado and Guillermo von Hünefeld - PMC Pm25LQ032C to PREW (+EW) Reported by Dirk Knop - Spansion S25FL016A to PREW (+EW) Reported by Márton Miklós - Spansion S25FL128S......0 to PREW (+PREW) Reported by Jim Houston - Spansion S25FL204K to PR (+PR) Reported by Thomas Debrunner - SST SST49LF016C to PREW (+EW) Reported by Steven Stremciuc - SST SST39VF040 to PREW (+PREW) Reported by Xavier Bourgeois - SST SST49LF040B to PREW (+EW) Reported by Rikard Åhlund - ST M25P10-A to PREW (+W) Reported by Martijn Schiedon - Winbond W39V040FA to PREW (+EW) Reported by Евгений Черкашин - Winbond W39V080FA to PREW (+EW) Reported by protagonist0 on IRC - Winbond W25Q80.W to PREW (+PREW) Reported by Miklós Márton - Winbond W25X64 to PREW (+REW) Reported by Johannes Krampf and Manuel Dejonghe - Fix ID of AMIC A25LQ64 Reported by Roman Titov - Fix page size of Spansion S25FL129P......1 Copy and paste error from the 128S uniform 256kB variant, probably. - Add Micron/Numonyx phase-change memory IDs Miscellaneous: - Detect Android target OS. No changes are required to build flashrom (excluding programmers with NEED_PCI) on Android. - Update rayerspi (spipgm) URL - Fix max_data_write handling of at45db. - Minor refinement of the README - Mark board enable for the GA-K8NS variants as tested. Tested by "nicolae788" on a board with socket 754. - Mark "Multi-system" chassis as non-laptop case. - Remove W836xx log requests. We got enough (and no one is looking at them for the time being anyway). - serprog: improve invalid reply error message, contributed by Urja Rannikko. - Remove default include paths for MinGW. - Disable implicit rules in the Makefile because we don't need them and they just make the build (imperceptibly) slower. - Enable our own strnlen() implementation not only on DJGPP but also if HAVE_STRNLEN is not defined. This is needed to get older BSDs (e.g. NetBSD 6.0, FreeBSD < 8.0) to work. - Tiny other stuff. Signed-off-by: Stefan Tauner <stefan.tau...@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tau...@alumni.tuwien.ac.at> Modified: trunk/Makefile trunk/README trunk/at45db.c trunk/board_enable.c trunk/chipset_enable.c trunk/dmi.c trunk/dummyflasher.c trunk/flash.h trunk/flashchips.c trunk/flashchips.h trunk/flashrom.8.tmpl trunk/flashrom.c trunk/helpers.c trunk/hwaccess.h trunk/jedec.c trunk/linux_spi.c trunk/os.h trunk/print.c trunk/programmer.h trunk/serprog.c Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Sun Jan 17 00:45:25 2016 (r1916) +++ trunk/Makefile Sat Jan 23 17:16:49 2016 (r1917) @@ -186,11 +186,8 @@ # MinGW doesn't have the ffs() function, but we can use gcc's __builtin_ffs(). FLASHROM_CFLAGS += -Dffs=__builtin_ffs # Some functions provided by Microsoft do not work as described in C99 specifications. This macro fixes that -# for MinGW. See http://sourceforge.net/apps/trac/mingw-w64/wiki/printf%20and%20scanf%20family */ +# for MinGW. See http://sourceforge.net/p/mingw-w64/wiki2/printf%20and%20scanf%20family/ */ FLASHROM_CFLAGS += -D__USE_MINGW_ANSI_STDIO=1 -# libusb-win32/libftdi stuff is usually installed in /usr/local. -CPPFLAGS += -I/usr/local/include -LDFLAGS += -L/usr/local/lib # For now we disable all PCI-based programmers on Windows/MinGW (no libpci). ifeq ($(CONFIG_INTERNAL), yes) UNSUPPORTED_FEATURES += CONFIG_INTERNAL=yes @@ -1126,4 +1123,7 @@ .PHONY: all install clean distclean compiler hwlibs features export tarball djgpp-dos featuresavailable libpayload +# Disable implicit suffixes and built-in rules (for performance and profit) +.SUFFIXES: + -include $(OBJS:.o=.d) Modified: trunk/README ============================================================================== --- trunk/README Sun Jan 17 00:45:25 2016 (r1916) +++ trunk/README Sat Jan 23 17:16:49 2016 (r1917) @@ -8,12 +8,13 @@ cards (NICs), SATA controller cards, and other external devices which can program flash chips. -It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32, and TSOP40 -chips, which use various protocols such as LPC, FWH, parallel flash, or SPI. +It supports a wide range of flash chips (most commonly found in SOIC8, DIP8, +SOIC16, WSON8, PLCC32, DIP32, TSOP32, and TSOP40 packages), which use various +protocols such as LPC, FWH, parallel flash, or SPI. -Do not use flashrom on laptops! The embedded controller (EC) present in many -laptops interacts badly with any flash attempts and can brick your laptop -permanently. +Do not use flashrom on laptops (yet)! The embedded controller (EC) present in +many laptops might interact badly with any attempts to communicate with the +flash chip and may brick your laptop. Please make a backup of your flash chip before writing to it. Modified: trunk/at45db.c ============================================================================== --- trunk/at45db.c Sun Jan 17 00:45:25 2016 (r1916) +++ trunk/at45db.c Sat Jan 23 17:16:49 2016 (r1917) @@ -99,6 +99,10 @@ static uint8_t at45db_prettyprint_protection_register(struct flashctx *flash, uint8_t opcode, const char *regname) { const uint8_t cmd[] = { opcode, 0, 0, 0 }; + const size_t sec_count = at45db_get_sector_count(flash); + if (sec_count < 2) + return 0; + /* The first two sectors share the first result byte. */ uint8_t buf[at45db_get_sector_count(flash) - 1]; @@ -332,7 +336,7 @@ /* Wait for completion. */ ret = at45db_wait_ready(flash, stepsize, retries); if (ret != 0) - msg_cerr("%s: chip did not became ready again after sending the erase command!\n", __func__); + msg_cerr("%s: chip did not become ready again after sending the erase command!\n", __func__); return ret; } @@ -463,7 +467,7 @@ } /* Create a suitable buffer to store opcode, address and data chunks for buffer1. */ - const unsigned int max_data_write = flash->mst->spi.max_data_write; + const int max_data_write = flash->mst->spi.max_data_write - 4; const unsigned int max_chunk = (max_data_write > 0 && max_data_write <= page_size) ? max_data_write : page_size; uint8_t buf[4 + max_chunk]; @@ -504,7 +508,7 @@ /* Wait for completion (typically a few ms). */ ret = at45db_wait_ready(flash, 250, 200); // 50 ms if (ret != 0) { - msg_cerr("%s: chip did not became ready again!\n", __func__); + msg_cerr("%s: chip did not become ready again!\n", __func__); return ret; } Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Sun Jan 17 00:45:25 2016 (r1916) +++ trunk/board_enable.c Sat Jan 23 17:16:49 2016 (r1917) @@ -333,12 +333,9 @@ continue; } } - msg_pinfo("Active config mode, unknown reg 0x20 ID: %02x.\n", model); - msg_pinfo("Please send the output of \"flashrom -V -p internal\" to \n" - "flashrom@flashrom.org with W836xx: your board name: flashrom -V\n" - "as the subject to help us finish support for your Super I/O. Thanks.\n"); + msg_pdbg("Active config mode, unknown reg 0x20 ID: %02x.\n", model); continue; - } + } /* The Super I/O reacts to W836xx enter and exit config mode, it's probably Winbond. */ w836xx_ext_enter(s.port); s.model = sio_read(s.port, 0x20); @@ -1156,6 +1153,7 @@ /* * Suited for: * - GIGABYTE GA-K8NS Pro-939: Socket 939 + NVIDIA nForce3 + CK8 + * - Probably other versions of the GA-K8NS */ static int nvidia_mcp_gpio0a_raise(void) { @@ -2387,8 +2385,10 @@ {0x8086, 0x24dd, 0x1043, 0x80a6, 0x8086, 0x2570, 0x1043, 0x8157, NULL, NULL, NULL, P3, "ASUS", "P5PE-VM", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x2443, 0x1043, 0x8027, 0x8086, 0x1130, 0x1043, 0x8027, "^CUSL2-C", NULL, NULL, P3, "ASUS", "CUSL2-C", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x2443, 0x1043, 0x8027, 0x8086, 0x1130, 0x1043, 0x8027, "^TUSL2-C", NULL, NULL, P3, "ASUS", "TUSL2-C", 0, NT, intel_ich_gpio21_raise}, + {0x1022, 0x780E, 0x1043, 0x1437, 0x1022, 0x780B, 0x1043, 0x1437, "^U38N$", NULL, NULL, P2, "ASUS", "U38N", 0, OK, p2_whitelist_laptop}, {0x1106, 0x3059, 0x1106, 0x4161, 0x1106, 0x3065, 0x1106, 0x0102, NULL, NULL, NULL, P3, "Bcom/Clientron", "WinNET P680", 0, OK, w836xx_memw_enable_2e}, {0x1106, 0x3177, 0x1106, 0x3177, 0x1106, 0x3116, 0x1106, 0x3116, "^KM266-8235$", "biostar", "m7viq", P3, "Biostar", "M7VIQ", 0, NT, w83697xx_memw_enable_2e}, + {0x8086, 0x283e, 0x1028, 0x01f9, 0x8086, 0x2a01, 0, 0, "^Latitude D630", NULL, NULL, P2, "Dell", "Latitude D630", 0, OK, p2_whitelist_laptop}, {0x10b7, 0x9055, 0x1028, 0x0082, 0x8086, 0x7190, 0, 0, NULL, NULL, NULL, P3, "Dell", "OptiPlex GX1", 0, OK, intel_piix4_gpo30_lower}, {0x8086, 0x3590, 0x1028, 0x016c, 0x1000, 0x0030, 0x1028, 0x016c, NULL, NULL, NULL, P3, "Dell", "PowerEdge 1850", 0, OK, intel_ich_gpio23_raise}, {0x1106, 0x3189, 0x1106, 0x3189, 0x1106, 0x3177, 0x1106, 0x3177, "^AD77", "dfi", "ad77", P3, "DFI", "AD77", 0, NT, w836xx_memw_enable_2e}, @@ -2401,6 +2401,7 @@ {0x10EC, 0x8139, 0x1695, 0x9001, 0x11C1, 0x5811, 0x1695, 0x9015, NULL, NULL, NULL, P3, "EPoX", "EP-8RDA3+", 0, OK, nvidia_mcp_gpio31_raise}, {0x8086, 0x7110, 0, 0, 0x8086, 0x7190, 0, 0, NULL, "epox", "ep-bx3", P3, "EPoX", "EP-BX3", 0, NT, intel_piix4_gpo22_raise}, {0x10de, 0x02f0, 0x105b, 0x0d01, 0x10de, 0x0264, 0x105b, 0x0d01, NULL, NULL, NULL, P3, "Foxconn", "6150K8MD-8EKRSH", 0, NT, nvidia_mcp_gpio2_raise}, + {0x8086, 0x2A40, 0x1734, 0x1148, 0x8086, 0x2930, 0x1734, 0x1148, "^XY680", NULL, NULL, P2, "Fujitsu", "Amilo Xi 3650", 0, OK, p2_whitelist_laptop}, {0x8086, 0x2443, 0x8086, 0x2442, 0x8086, 0x1130, 0x8086, 0x1130, "^6IEM ", NULL, NULL, P3, "GIGABYTE", "GA-6IEM", 0, NT, intel_ich_gpio25_raise}, {0x1106, 0x0686, 0x1106, 0x0686, 0x1106, 0x3058, 0x1458, 0xa000, NULL, NULL, NULL, P3, "GIGABYTE", "GA-7ZM", 512, OK, NULL}, {0x8086, 0x2570, 0x1458, 0x2570, 0x8086, 0x24d0, 0, 0, "^8IP775/-G$",NULL, NULL, P3, "GIGABYTE", "GA-8IP775", 0, OK, intel_ich_gpio32_raise}, @@ -2410,7 +2411,7 @@ {0x1039, 0x0651, 0x1039, 0x0651, 0x1039, 0x7002, 0x1458, 0x5004, "^GA-8SIMLH$",NULL, NULL, P3, "GIGABYTE", "GA-8SIMLH", 0, OK, sis_gpio0_raise_and_w836xx_memw}, {0x10DE, 0x02F1, 0x1458, 0x5000, 0x10DE, 0x0261, 0x1458, 0x5001, NULL, NULL, NULL, P3, "GIGABYTE", "GA-K8N51GMF", 0, OK, nvidia_mcp_gpio3b_raise}, {0x10DE, 0x026C, 0x1458, 0xA102, 0x10DE, 0x0260, 0x1458, 0x5001, NULL, NULL, NULL, P3, "GIGABYTE", "GA-K8N51GMF-9", 0, OK, nvidia_mcp_gpio3b_raise}, - {0x10de, 0x00e4, 0x1458, 0x0c11, 0x10de, 0x00e0, 0x1458, 0x0c11, NULL, NULL, NULL, P3, "GIGABYTE", "GA-K8NS Pro-939", 0, NT, nvidia_mcp_gpio0a_raise}, + {0x10DE, 0x00E4, 0x1458, 0x0C11, 0x10DE, 0x00E0, 0x1458, 0x0C11, NULL, NULL, NULL, P3, "GIGABYTE", "GA-K8NS", 0, OK, nvidia_mcp_gpio0a_raise}, {0x10DE, 0x0050, 0x1458, 0x0C11, 0x10DE, 0x005e, 0x1458, 0x5000, NULL, NULL, NULL, P3, "GIGABYTE", "GA-K8N-SLI", 0, OK, nvidia_mcp_gpio21_raise}, {0x8086, 0x2415, 0x103c, 0x1250, 0x10b7, 0x9200, 0x103c, 0x1247, NULL, NULL, NULL, P3, "HP", "e-Vectra P2706T", 0, OK, board_hp_p2706t}, {0x1166, 0x0223, 0x103c, 0x320d, 0x14e4, 0x1678, 0x103c, 0x703e, NULL, "hp", "dl145_g3", P3, "HP", "ProLiant DL145 G3", 0, OK, board_hp_dl145_g3_enable}, @@ -2426,10 +2427,11 @@ {0x8086, 0x7190, 0, 0, 0x8086, 0x7110, 0, 0, "^SE440BX-2$", NULL, NULL, P3, "Intel", "SE440BX-2", 0, NT, intel_piix4_gpo27_lower}, {0x1022, 0x7468, 0, 0, 0x1022, 0x7460, 0, 0, NULL, "iwill", "dk8_htx", P3, "IWILL", "DK8-HTX", 0, OK, w83627hf_gpio24_raise_2e}, {0x8086, 0x27A0, 0x8086, 0x27a0, 0x8086, 0x27b8, 0x8086, 0x27b8, NULL, "kontron", "986lcd-m", P3, "Kontron", "986LCD-M", 0, OK, board_kontron_986lcd_m}, + {0x8086, 0x2917, 0x17AA, 0x20F5, 0x8086, 0x2930, 0x17AA, 0x20F9, "^ThinkPad T400", NULL, NULL, P2, "IBM/Lenovo", "ThinkPad T400", 0, OK, p2_whitelist_laptop}, {0x8086, 0x1E22, 0x17AA, 0x21F6, 0x8086, 0x1E55, 0x17AA, 0x21F6, "^ThinkPad T530", NULL, NULL, P2, "IBM/Lenovo", "ThinkPad T530", 0, OK, p2_whitelist_laptop}, {0x8086, 0x27a0, 0x17aa, 0x2015, 0x8086, 0x27b9, 0x17aa, 0x2009, "^ThinkPad T60", NULL, NULL, P2, "IBM/Lenovo", "ThinkPad T60", 0, OK, p2_whitelist_laptop}, {0x8086, 0x27a0, 0x17aa, 0x2017, 0x8086, 0x27b9, 0x17aa, 0x2009, "^ThinkPad T60", NULL, NULL, P2, "IBM/Lenovo", "ThinkPad T60(s)", 0, OK, p2_whitelist_laptop}, - {0x8086, 0x2917, 0x17AA, 0x20F5, 0x8086, 0x2930, 0x17AA, 0x20F9, "^ThinkPad X200$", NULL, NULL, P2, "IBM/Lenovo", "ThinkPad X200", 0, OK, p2_whitelist_laptop}, + {0x8086, 0x2917, 0x17AA, 0x20F5, 0x8086, 0x2930, 0x17AA, 0x20F9, "^ThinkPad X200", NULL, NULL, P2, "IBM/Lenovo", "ThinkPad X200", 0, OK, p2_whitelist_laptop}, {0x8086, 0x3B07, 0x17AA, 0x2166, 0x8086, 0x3B30, 0x17AA, 0x2167, "^Lenovo X201", NULL, NULL, P2, "IBM/Lenovo", "ThinkPad X201", 0, OK, p2_whitelist_laptop}, {0x8086, 0x1E22, 0x17AA, 0x21FA, 0x8086, 0x1E55, 0x17AA, 0x21FA, "^ThinkPad X230", NULL, NULL, P2, "IBM/Lenovo", "ThinkPad X230", 0, OK, p2_whitelist_laptop}, {0x8086, 0x27A0, 0x17AA, 0x2017, 0x8086, 0x27B9, 0x17AA, 0x2009, "^ThinkPad X60", NULL, NULL, P2, "IBM/Lenovo", "ThinkPad X60(s)", 0, OK, p2_whitelist_laptop}, Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Sun Jan 17 00:45:25 2016 (r1916) +++ trunk/chipset_enable.c Sat Jan 23 17:16:49 2016 (r1917) @@ -1632,7 +1632,7 @@ {0x8086, 0x1e5d, NT, "Intel", "HM75", enable_flash_pch7}, {0x8086, 0x1e5e, NT, "Intel", "HM70", enable_flash_pch7}, {0x8086, 0x1e5f, DEP, "Intel", "NM70", enable_flash_pch7}, - {0x8086, 0x1f38, NT, "Intel", "Avoton/Rangeley", enable_flash_silvermont}, + {0x8086, 0x1f38, DEP, "Intel", "Avoton/Rangeley", enable_flash_silvermont}, {0x8086, 0x1f39, NT, "Intel", "Avoton/Rangeley", enable_flash_silvermont}, {0x8086, 0x1f3a, NT, "Intel", "Avoton/Rangeley", enable_flash_silvermont}, {0x8086, 0x1f3b, NT, "Intel", "Avoton/Rangeley", enable_flash_silvermont}, @@ -1781,6 +1781,10 @@ {0x8086, 0x9cc7, NT, "Intel", "Broadwell Y Premium", enable_flash_pch9}, {0x8086, 0x9cc9, NT, "Intel", "Broadwell Y Base", enable_flash_pch9}, {0x8086, 0x9ccb, NT, "Intel", "Broadwell H", enable_flash_pch9}, + {0x8086, 0x9d41, BAD, "Intel", "Sunrise Point (Skylake LP Sample)", NULL}, + {0x8086, 0x9d43, BAD, "Intel", "Sunrise Point (Skylake-U Base)", NULL}, + {0x8086, 0x9d48, BAD, "Intel", "Sunrise Point (Skylake-U Premium)", NULL}, + {0x8086, 0x9d46, BAD, "Intel", "Sunrise Point (Skylake-Y Premium)", NULL}, #endif {0}, }; @@ -1816,6 +1820,10 @@ chipset_enables[i].device_id); msg_pinfo(".\n"); + if (chipset_enables[i].status == BAD) { + msg_perr("ERROR: This chipset is not supported yet.\n"); + return ERROR_FATAL; + } if (chipset_enables[i].status == NT) { msg_pinfo("This chipset is marked as untested. If " "you are using an up-to-date version\nof " @@ -1826,8 +1834,7 @@ "(-V) log.\nThank you!\n"); } msg_pinfo("Enabling flash write... "); - ret = chipset_enables[i].doit(dev, - chipset_enables[i].device_name); + ret = chipset_enables[i].doit(dev, chipset_enables[i].device_name); if (ret == NOT_DONE_YET) { ret = -2; msg_pinfo("OK - searching further chips.\n"); Modified: trunk/dmi.c ============================================================================== --- trunk/dmi.c Sun Jan 17 00:45:25 2016 (r1916) +++ trunk/dmi.c Sat Jan 23 17:16:49 2016 (r1917) @@ -90,6 +90,7 @@ {0x11, 0, "Main Server Chassis"}, {0x17, 0, "Rack Mount Chassis"}, {0x18, 0, "Sealed-case PC"}, /* used by Supermicro (X8SIE) */ + {0x19, 0, "Multi-system"}, /* used by Supermicro (X7DWT) */ }; #if CONFIG_INTERNAL_DMI == 1 Modified: trunk/dummyflasher.c ============================================================================== --- trunk/dummyflasher.c Sun Jan 17 00:45:25 2016 (r1916) +++ trunk/dummyflasher.c Sat Jan 23 17:16:49 2016 (r1917) @@ -376,8 +376,8 @@ /* We will silently (in default verbosity) ignore the file if it does not exist (yet) or the size does * not match the emulated chip. */ if (!stat(emu_persistent_image, &image_stat)) { - msg_pdbg("Found persistent image %s, size %li ", - emu_persistent_image, (long)image_stat.st_size); + msg_pdbg("Found persistent image %s, %jd B ", + emu_persistent_image, (intmax_t)image_stat.st_size); if (image_stat.st_size == emu_chip_size) { msg_pdbg("matches.\n"); msg_pdbg("Reading %s\n", emu_persistent_image); Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Sun Jan 17 00:45:25 2016 (r1916) +++ trunk/flash.h Sat Jan 23 17:16:49 2016 (r1917) @@ -260,7 +260,7 @@ #ifdef __MINGW32__ char* strtok_r(char *str, const char *delim, char **nextp); #endif -#if defined(__DJGPP__) +#if defined(__DJGPP__) || !defined(HAVE_STRNLEN) size_t strnlen(const char *str, size_t n); #endif Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Sun Jan 17 00:45:25 2016 (r1916) +++ trunk/flashchips.c Sat Jan 23 17:16:49 2016 (r1917) @@ -1246,7 +1246,7 @@ .name = "A25LQ64", .bustype = BUS_SPI, .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25LQ032, + .model_id = AMIC_A25LQ64, .total_size = 8192, .page_size = 256, /* supports SFDP */ @@ -2658,7 +2658,7 @@ .block_erase = spi_erase_at45db_block, }, /* Although the datasheets describes sectors (which can be write protected) * there seems to be no erase functions for them. - { + { .eraseblocks = { {8 * 528, 1}, {120 * 528, 1}, @@ -2688,7 +2688,7 @@ /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ .feature_bits = FEATURE_OTP, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_at45db, .probe_timing = TIMING_ZERO, .block_erasers = @@ -4657,7 +4657,7 @@ /* OTP: 512B total; enter 0x3A */ /* QPI enable 0x38, disable 0xFF */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -4695,7 +4695,7 @@ /* OTP: 512B total; enter 0x3A */ /* QPI enable 0x38, disable 0xFF */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_OK_PR, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { @@ -5630,7 +5630,7 @@ .page_size = 256, /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -6438,7 +6438,7 @@ .model_id = INTEL_28F001T, .total_size = 128, .page_size = 128 * 1024, /* 112k + 2x4k + 8k */ - .tested = TEST_OK_PR, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = @@ -6821,7 +6821,7 @@ .model_id = MACRONIX_MX23L6454, .total_size = 8192, .page_size = 256, - .tested = {.probe = NT, .read = NT, .erase = NA, .write = NA}, + .tested = {.probe = OK, .read = OK, .erase = NA, .write = NA}, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .write = NULL, /* MX23L6454 is a mask ROM, so it is read-only */ @@ -7337,7 +7337,7 @@ .page_size = 256, /* OTP: 64B total; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -7725,7 +7725,7 @@ /* OTP: 512B total; enter 0xB1, exit 0xC1 */ /* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -8354,7 +8354,7 @@ .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PRE, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -8737,7 +8737,7 @@ .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -9031,7 +9031,7 @@ }, .printlock = spi_prettyprint_status_register_default_welwip, .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ + .write = spi_chip_write_256, /* Page write supported (similar to PP but allows 0->1 changes) */ .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, @@ -9274,7 +9274,7 @@ /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { @@ -10069,7 +10069,7 @@ .page_size = 256, /* OTP: 64B total; read 0x4B, write 0xB1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PR, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -10658,10 +10658,10 @@ { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_d7, - }, { + }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, - }, { + }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } @@ -10726,10 +10726,10 @@ { .eraseblocks = { {256, 1024} }, .block_erase = spi_block_erase_db, - }, { + }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, - }, { + }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } @@ -10756,10 +10756,10 @@ { .eraseblocks = { {256, 2 * 1024} }, .block_erase = spi_block_erase_db, - }, { + }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, - }, { + }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } @@ -10787,10 +10787,10 @@ { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_d7, - }, { + }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, - }, { + }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } @@ -10818,13 +10818,13 @@ { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, - }, { + }, { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_d7, - }, { + }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, - }, { + }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } @@ -10852,10 +10852,10 @@ { .eraseblocks = { {8 * 1024, 128} }, .block_erase = spi_block_erase_d7, - }, { + }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, - }, { + }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } @@ -10997,7 +10997,7 @@ .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PR, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -11084,7 +11084,7 @@ .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PR, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { @@ -11398,7 +11398,7 @@ /* supports 4B addressing */ /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { @@ -11517,7 +11517,7 @@ .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL128, .total_size = 16384, - .page_size = 512, + .page_size = 256, /* OTP: 506B total, 16B reserved; read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, @@ -12655,7 +12655,7 @@ .total_size = 512, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = @@ -12911,7 +12911,7 @@ .total_size = 2048, .page_size = 4 * 1024, .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, + .tested = TEST_OK_PREW, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ .block_erasers = @@ -13035,7 +13035,7 @@ .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET | FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150ns */ .block_erasers = @@ -14261,7 +14261,7 @@ .page_size = 256, /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -14623,7 +14623,7 @@ .total_size = 8192, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PROBE, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -15182,7 +15182,7 @@ .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, .block_erasers = @@ -15419,7 +15419,7 @@ .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, .block_erasers = Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Sun Jan 17 00:45:25 2016 (r1916) +++ trunk/flashchips.h Sat Jan 23 17:16:49 2016 (r1917) @@ -847,6 +847,9 @@ #define ST_N25Q512__3E 0xBA20 /* N25Q512, 3.0V, (uniform sectors expected) */ #define ST_N25Q512__1E 0xBB20 /* N25Q512, 1.8V, (uniform sectors expected) */ #define ST_N25Q00A__3E 0xBA21 /* N25Q00A, 3.0V, (uniform sectors expected) */ +#define ST_NP5Q032 0xDA16 /* Phase-change memory (PCM), 3V */ +#define ST_NP5Q064 0xDA17 /* Phase-change memory (PCM), 3V */ +#define ST_NP5Q128 0xDA18 /* Phase-change memory (PCM), 3V */ #define SYNCMOS_MVC_ID 0x40 /* SyncMOS (SM) and Mosel Vitelic Corporation (MVC) */ #define MVC_V29C51000T 0x00 Modified: trunk/flashrom.8.tmpl ============================================================================== --- trunk/flashrom.8.tmpl Sun Jan 17 00:45:25 2016 (r1916) +++ trunk/flashrom.8.tmpl Sat Jan 23 17:16:49 2016 (r1917) @@ -552,13 +552,13 @@ is one of the following chips (please specify only the chip name, not the vendor): .sp -.RB "* ST " M25P10.RES " SPI flash chip (RES, page write)" +.RB "* ST " M25P10.RES " SPI flash chip (128 kB, RES, page write)" .sp -.RB "* SST " SST25VF040.REMS " SPI flash chip (REMS, byte write)" +.RB "* SST " SST25VF040.REMS " SPI flash chip (512 kB, REMS, byte write)" .sp -.RB "* SST " SST25VF032B " SPI flash chip (RDID, AAI write)" +.RB "* SST " SST25VF032B " SPI flash chip (4096 kB, RDID, AAI write)" .sp -.RB "* Macronix " MX25L6436 " SPI flash chip (RDID, SFDP)" +.RB "* Macronix " MX25L6436 " SPI flash chip (8192 kB, RDID, SFDP)" .sp Example: .B "flashrom -p dummy:emulate=SST25VF040.REMS" @@ -899,6 +899,7 @@ STK200/300, " wiggler " for the Macraigor Wiggler, or " xilinx " for the Xilinx Parallel Cable III (DLC 5)." .sp More information about the RayeR hardware is available at +.nh .URLB "http://rayer.g6.cz/elektro/spipgm.htm"; "RayeR's website" . The Altera ByteBlasterMV datasheet can be obtained from .URLB "http://www.altera.co.jp/literature/ds/dsbytemv.pdf"; Altera . @@ -953,10 +954,6 @@ parameter as explained in the .B nic3com et al.\& section above. -.sp -More information about the hardware is available at -.nh -.BR http://wiki.opengraphics.org . .SS .BR "linux_spi " programmer .IP @@ -1148,7 +1145,7 @@ .SH LICENSE .B flashrom is covered by the GNU General Public License (GPL), version 2. Some files are -additionally available under the GPL (version 2, or any later version). +additionally available under any later version of the GPL. .SH COPYRIGHT .br Please see the individual files. @@ -1219,6 +1216,8 @@ .br Steven James .br +Urja Rannikko +.br Uwe Hermann .br Wang Qingpei Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Sun Jan 17 00:45:25 2016 (r1916) +++ trunk/flashrom.c Sat Jan 23 17:16:49 2016 (r1917) @@ -1672,7 +1672,7 @@ if (p < PROGRAMMER_INVALID - 1) msg_ginfo("%s", delim); } - msg_ginfo("\n"); + msg_ginfo("\n"); } void list_programmers_linebreak(int startcol, int cols, int paren) Modified: trunk/helpers.c ============================================================================== --- trunk/helpers.c Sun Jan 17 00:45:25 2016 (r1916) +++ trunk/helpers.c Sat Jan 23 17:16:49 2016 (r1917) @@ -92,7 +92,7 @@ #endif /* There is no strnlen in DJGPP */ -#if defined(__DJGPP__) +#if defined(__DJGPP__) || !defined(HAVE_STRNLEN) size_t strnlen(const char *str, size_t n) { size_t i; Modified: trunk/hwaccess.h ============================================================================== --- trunk/hwaccess.h Sun Jan 17 00:45:25 2016 (r1916) +++ trunk/hwaccess.h Sat Jan 23 17:16:49 2016 (r1917) @@ -45,7 +45,7 @@ /* The next big hunk tries to guess endianess from various preprocessor macros */ -/* First some error checking in case some weird header has defines both. +/* First some error checking in case some weird header has defined both. * NB: OpenBSD always defines _BIG_ENDIAN and _LITTLE_ENDIAN. */ #if defined (__LITTLE_ENDIAN__) && defined (__BIG_ENDIAN__) #error Conflicting endianness #define Modified: trunk/jedec.c ============================================================================== --- trunk/jedec.c Sun Jan 17 00:45:25 2016 (r1916) +++ trunk/jedec.c Sat Jan 23 17:16:49 2016 (r1917) @@ -184,13 +184,11 @@ else if (chip->probe_timing == TIMING_ZERO) { /* No delay. */ probe_timing_enter = probe_timing_exit = 0; } else if (chip->probe_timing == TIMING_FIXME) { /* == _IGNORED */ - msg_cdbg("Chip lacks correct probe timing information, " - "using default 10mS/40uS. "); + msg_cdbg("Chip lacks correct probe timing information, using default 10ms/40us. "); probe_timing_enter = 10000; probe_timing_exit = 40; } else { - msg_cerr("Chip has negative value in probe_timing, failing " - "without chip access\n"); + msg_cerr("Chip has negative value in probe_timing, failing without chip access\n"); return 0; } Modified: trunk/linux_spi.c ============================================================================== --- trunk/linux_spi.c Sun Jan 17 00:45:25 2016 (r1916) +++ trunk/linux_spi.c Sat Jan 23 17:16:49 2016 (r1917) @@ -35,6 +35,12 @@ #include "programmer.h" #include "spi.h" +/* Devices known to work with this module (FIXME: export as struct dev_entry): + * Beagle Bone Black + * Raspberry Pi + * HummingBoard + */ + static int fd = -1; static int linux_spi_shutdown(void *data); Modified: trunk/os.h ============================================================================== --- trunk/os.h Sun Jan 17 00:45:25 2016 (r1916) +++ trunk/os.h Sat Jan 23 17:16:49 2016 (r1917) @@ -58,6 +58,11 @@ #define __FLASHROM_OS__ "libpayload" // Linux #elif defined(__linux__) -#define __FLASHROM_OS__ "Linux" + // There are various flags in use on Android apparently. __ANDROID__ seems to be the most trustworthy. + #if defined(__ANDROID__) + #define __FLASHROM_OS__ "Android" + #else + #define __FLASHROM_OS__ "Linux" + #endif #endif __FLASHROM_OS__ Modified: trunk/print.c ============================================================================== --- trunk/print.c Sun Jan 17 00:45:25 2016 (r1916) +++ trunk/print.c Sat Jan 23 17:16:49 2016 (r1917) @@ -542,7 +542,7 @@ B("abit", "VA6", OK, NULL, NULL), B("abit", "VT6X4", OK, NULL, NULL), B("Acer", "V75-M", OK, NULL, "This is an OEM board used by IBM in e.g. Aptiva 2170-G"), - B("Acer", "EM61SM/EM61PM", OK, NULL, "Used in Acer Aspire T180."), + B("Acer", "EM61SM/EM61PM", OK, NULL, "Used in Acer Aspire T180 and E380. Seems to be an OEM variant of abit's NF-M2S."), B("Acorp", "6A815EPD", OK, "http://web.archive.org/web/20021206163652/www.acorp.com.tw/English/default.asp";, NULL), B("Acorp", "6M810C", OK, NULL, NULL), B("ADLINK", "Express-HR", OK, "http://www.adlinktech.com/PD/web/PD_detail.php?pid=1012";, NULL), @@ -568,10 +568,13 @@ B("ASRock", "A780FullHD", OK, "http://www.asrock.com/mb/overview.asp?Model=A780FullHD";, "While flashrom is working correctly, there might be problems with the firmware images themselves. Please see https://flashrom.org/pipermail/flashrom/2012-July/009600.html for details."), B("ASRock", "ALiveNF6G-DVI", OK, "http://www.asrock.com/mb/overview.asp?Model=ALiveNF6G-DVI";, NULL), B("ASRock", "AM2NF6G-VSTA", OK, "http://www.asrock.com/mb/overview.asp?Model=AM2NF6G-VSTA";, NULL), + B("ASRock", "AMCP7AION-HT", OK, "http://www.asrock.com/nettop/NVIDIA/ION%20330HT/";, "Used in ION 330HT(-BD) barebones."), B("ASRock", "ConRoeXFire-eSATA2", OK, "http://www.asrock.com/mb/overview.asp?model=conroexfire-esata2";, NULL), - B("ASRock", "E350M1/USB3", OK, "http://www.asrock.com/mb/overview.asp?model=e350m1/usb3";, NULL), + B("ASRock", "E350M1/USB3", OK, "http://www.asrock.com/mb/overview.asp?model=e350m1/usb3";, "Vendor firmware writes to flash at shutdown. This probably corrupts the flash in case you write coreboot while running the vendor firmware. Simply updating the vendor firmware should be fine."), B("ASRock", "Fatal1ty Z77 Performance", BAD, "http://www.asrock.com/mb/overview.asp?Model=Fatal1ty%20Z77%20Performance";, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASRock", "G31M-GS", OK, "http://www.asrock.com/mb/overview.asp?Model=G31M-GS";, NULL), B("ASRock", "G31M-S rev 2.0", OK, "http://www.asrock.com/mb/overview.asp?model=G31M-S";, NULL), + B("ASRock", "G41M-VS3", OK, "http://www.asrock.com/mb/overview.asp?Model=G41M-VS3";, NULL), B("ASRock", "H61M-ITX", BAD, "http://www.asrock.com/mb/overview.asp?Model=H61M-ITX";, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASRock", "H67M", BAD, "http://www.asrock.com/mb/overview.asp?Model=H67M";, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASRock", "IMB-180-H", OK, "http://www.asrock.com/ipc/overview.asp?Model=IMB-A180-H";, NULL), @@ -581,6 +584,7 @@ B("ASRock", "K8S8X", OK, "http://www.asrock.com/mb/overview.asp?Model=K8S8X";, NULL), B("ASRock", "M3A790GXH/128M", OK, "http://www.asrock.com/mb/overview.asp?Model=M3A790GXH/128M";, NULL), B("ASRock", "N61P-S", OK, "http://www.asrock.com/mb/overview.asp?Model=N61P-S";, NULL), + B("ASRock", "N68C-S UCC", OK, "http://www.asrock.com/mb/overview.asp?Model=N68C-S%20UCC";, NULL), B("ASRock", "P4i65GV", OK, "http://www.asrock.com/mb/overview.asp?Model=P4i65GV";, NULL), B("ASRock", "Z68 Extreme4", BAD, "http://www.asrock.com/mb/overview.asp?Model=Z68%20Extreme4";, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "A7N8X Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8X_Deluxe/";, NULL), @@ -609,6 +613,7 @@ B("ASUS", "C60M1-I", OK, "http://www.asus.com/Motherboards/C60M1I/";, "The MAC address of the onboard network card is stored in flash."), B("ASUS", "Crosshair II Formula", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/Crosshair_II_Formula/";, NULL), B("ASUS", "Crosshair IV Extreme", OK, "http://www.asus.com/Motherboards/AMD_AM3/Crosshair_IV_Extreme/";, NULL), + B("ASUS", "CUSL2-C", OK, NULL, "The image provided by ASUS is only 256 kB big and has to be written to the upper 256 kB of the 512 kB chip."), B("ASUS", "DSAN-DX", NT, "http://www.asus.com/Server_Workstation/Server_Motherboards/DSANDX/";, NULL), B("ASUS", "E35M1-I DELUXE", OK, "http://www.asus.com/Motherboards/AMD_CPU_on_Board/E35M1I_DELUXE/";, NULL), B("ASUS", "F1A75-V PRO", OK, "http://www.asus.com/Motherboard/F1A75V_PRO/";, NULL), @@ -694,11 +699,13 @@ B("ASUS", "P5GDC Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDC_Deluxe/";, NULL), B("ASUS", "P5GDC-V Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDCV_Deluxe/";, NULL), B("ASUS", "P5GD2/C variants", NT, NULL, "Untested board enable."), + B("ASUS", "P5K SE", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5K_SE/";, NULL), B("ASUS", "P5K-V", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KV/";, NULL), B("ASUS", "P5K-VM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KVM/";, NULL), B("ASUS", "P5KC", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KC/";, NULL), B("ASUS", "P5KPL-AM IN/GB", OK, "http://support.asus.com/download.aspx?SLanguage=en&m=P5KPL-AM+IN%2fGB&os=29";, NULL), B("ASUS", "P5KPL-CM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KPLCM/";, NULL), + B("ASUS", "P5KPL-VM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KPLVM/";, "Found in V3-P5G31."), B("ASUS", "P5L-MX", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LMX/";, NULL), B("ASUS", "P5L-VM 1394", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LVM_1394/";, NULL), B("ASUS", "P5LD2", OK, NULL, NULL), @@ -740,9 +747,9 @@ B("ASUS", "P8Z68-V LE", BAD, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8Z68-V PRO", BAD, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8Z68-V PRO/GEN3", OK, "http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z68V_PROGEN3/";, "Warning: MAC address of LOM is stored at 0x1000 - 0x1005 of the image."), + B("ASUS", "RAMPAGE III GENE", OK, "http://www.asus.com/Motherboards/RAMPAGE_III_GENE/";, "The MAC address of the onboard network card is stored in flash."), B("ASUS", "SABERTOOTH 990FX", OK, "http://www.asus.com/Motherboards/AMD_AM3Plus/SABERTOOTH_990FX/";, NULL), B("ASUS", "SABERTOOTH 990FX R2.0", OK, "http://www.asus.com/Motherboards/AMD_AM3Plus/SABERTOOTH_990FX_R20/";, NULL), - B("ASUS", "CUSL2-C", OK, NULL, "The image provided by ASUS is only 256 kB big and has to be written to the upper 256 kB of the 512 kB chip."), B("ASUS", "TUSL2-C", NT, "http://support.asus.com/download.aspx?SLanguage=en&p=1&s=4&m=TUSL2-C&os=&hashedid=n/a";, "Untested board enable."), B("ASUS", "Z8NA-D6C", OK, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6C/";, NULL), B("ASUS", "Z8PE-D12", OK, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8PED12/";, NULL), @@ -827,27 +834,36 @@ B("GIGABYTE", "GA-8S648", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1674";, NULL), B("GIGABYTE", "GA-8SIMLFS 2.0", OK, NULL, "This is an OEM board used by Fujitsu."), B("GIGABYTE", "GA-8SIMLH", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1399";, NULL), + B("GIGABYTE", "GA-945GCM-S2 (rev. 3.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2466";, NULL), + B("GIGABYTE", "GA-945GM-S2", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2331";, NULL), B("GIGABYTE", "GA-945PL-S3P (rev. 6.6)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2541";, NULL), B("GIGABYTE", "GA-965GM-S2 (rev. 2.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2617";, NULL), B("GIGABYTE", "GA-965P-DS4", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2288";, NULL), + B("GIGABYTE", "GA-965P-S3 (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2321";, NULL), B("GIGABYTE", "GA-970A-D3P (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4642";, NULL), B("GIGABYTE", "GA-970A-UD3P (rev. 2.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=5194";, "Primary flash chip is a Macronix MX25L3206E."), B("GIGABYTE", "GA-990FXA-UD3 (rev. 4.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4672";, NULL), B("GIGABYTE", "GA-A75M-UD2H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3928";, NULL), B("GIGABYTE", "GA-B85M-D3H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4567";, NULL), - B("GIGABYTE", "GA-EP31-DS3L (rev. 2.1)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2964";, NULL), + B("GIGABYTE", "GA-EG43M-S2H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2878";, NULL), + B("GIGABYTE", "GA-EP31-DS3L (rev. 1.0, 2.1)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2964";, NULL), B("GIGABYTE", "GA-EP35-DS3L", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2778";, NULL), B("GIGABYTE", "GA-EX58-UD4P", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2986";, NULL), + B("GIGABYTE", "GA-G33M-S2", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2557";, NULL), + B("GIGABYTE", "GA-G33M-S2L", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2692";, NULL), B("GIGABYTE", "GA-G41MT-S2PT", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3960";, NULL), + B("GIGABYTE", "GA-H55M-S2", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3509";, "8 MB (ME) + 1 MB (BIOS) flash chips - hardware sequencing required."), B("GIGABYTE", "GA-H61M-D2-B3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3773";, NULL), B("GIGABYTE", "GA-H61M-D2H-USB3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4004";, NULL), B("GIGABYTE", "GA-H77-D3H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4141";, "Does only work with -p internal:ich_spi_mode=hwseq due to an evil twin of MX25L6405 and ICH SPI lockdown."), B("GIGABYTE", "GA-H77-DS3H (rev. 1.1)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4318";, NULL), B("GIGABYTE", "GA-H77M-D3H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4388";, NULL), + B("GIGABYTE", "GA-J1900N-D3V", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4918";, NULL), B("GIGABYTE", "GA-K8N51GMF-9", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1939";, NULL), B("GIGABYTE", "GA-K8N51GMF", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1950";, NULL), B("GIGABYTE", "GA-K8N-SLI", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1928";, NULL), - B("GIGABYTE", "GA-K8NS Pro-939", NT, "http://www.gigabyte.com/products/product-page.aspx?pid=1875";, "Untested board enable."), + B("GIGABYTE", "GA-K8NS", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1784";, NULL), + B("GIGABYTE", "GA-M56S-S3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2607";, NULL), B("GIGABYTE", "GA-M57SLI-S4", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2287";, NULL), B("GIGABYTE", "GA-M61P-S3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2434";, NULL), B("GIGABYTE", "GA-M720-US3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3006";, NULL), @@ -863,6 +879,8 @@ B("GIGABYTE", "GA-MA790FX-DQ6", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2690";, NULL), B("GIGABYTE", "GA-MA790GP-DS4H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2887";, NULL), B("GIGABYTE", "GA-MA790XT-UD4P (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3010";, NULL), + B("GIGABYTE", "GA-P31-DS3L", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2615";, NULL), + B("GIGABYTE", "GA-P31-S3G", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2676";, NULL), B("GIGABYTE", "GA-P55-USB3 (rev. 2.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3440";, NULL), B("GIGABYTE", "GA-P55A-UD4 (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3436";, NULL), B("GIGABYTE", "GA-P55A-UD7" , OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3324";, NULL), @@ -889,7 +907,7 @@ B("HP", "Vectra VL420 SFF", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00060661&lang=en&cc=us";, NULL), B("HP", "xw4400 (0A68h)", BAD, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00775230";, "ICH7 with SPI lock down, BIOS lock, flash block detection (SST25VF080B); see http://paste.flashrom.org/view.php?id=686";), B("HP", "xw6400", BAD, NULL, "No chip found, see https://flashrom.org/pipermail/flashrom/2012-March/009006.html";), - B("HP", "xw9300", BAD, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=459226";, "Missing board enable, see https://flashrom.org/pipermail/flashrom/2012-February/008862.html";), + B("HP", "xw9300", BAD, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=459226";, "Missing board enable, see https://flashrom.org/pipermail/flashrom/2012-March/008885.html";), B("HP", "xw9400", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodSeriesId=3211286&prodTypeId=12454";, "Boot block is write protected unless the solder points next to F2 are shorted."), B("HP", "Z400 Workstation (0AE4h)", BAD, NULL, "ICH10R with BIOS lock enable and a protected range PRBAD, see https://flashrom.org/pipermail/flashrom/2012-June/009350.html";), B("IBASE", "MB899", OK, "http://www.ibase-i.com.tw/2009/mb899.html";, NULL), @@ -958,6 +976,7 @@ B("MSI", "MS-7309 (K9N6SGM-V)", BAD, "http://www.msi.com/product/mb/K9N6SGM-V---K9N6PGM-FI---K9N6PGM-F.html";, "Uses Fintek F71882F/F71883F/F71887 SPI-to-LPC translation."), B("MSI", "MS-7309 (K9N6PGM2-V2)", OK, "http://www.msi.com/product/mb/K9N6PGM2-V2.html";, NULL), B("MSI", "MS-7312 (K9MM-V)", OK, "http://www.msi.com/product/mb/K9MM-V.html";, NULL), + B("MSI", "MS-7336", OK, NULL, "Some non-essential DMI data (e.g. serial numbers) is overwritten when using flashrom. This is an OEM board used by HP (e.g. dx2300 Microtower)."), B("MSI", "MS-7345 (P35 Neo2-FIR)", OK, "http://www.msi.com/product/mb/P35-Neo2-FR---FIR.html";, NULL), B("MSI", "MS-7357 (G33M)", OK, "http://www.msi.com/product/mb/G33M.html";, NULL), B("MSI", "MS-7368 (K9AG Neo2-Digital)", OK, "http://www.msi.com/product/mb/K9AG-Neo2-Digital.html";, NULL), @@ -984,6 +1003,7 @@ B("MSI", "MS-7698 (E350IA-E45)", OK, "http://www.msi.com/product/mb/E350IA-E45.html";, NULL), B("MSI", "MS-7740 (H61MA-E35(B3))", OK, "http://www.msi.com/product/mb/H61MA-E35--B3-.html";, NULL), B("MSI", "MS-7756 (H77MA-G43)", OK, "http://www.msi.com/product/mb/H77MA-G43.html";, NULL), + B("MSI", "MS-7760 (X79A-GD45 (8D))", OK, "http://www.msi.com/product/mb/X79A-GD45-8D.html";, NULL), B("MSI", "MS-7808 (B75MA-E33)", OK, "http://www.msi.com/product/mb/B75MA-E33.html";, NULL), B("MSI", "MS-7816 (H87-G43)", OK, "http://www.msi.com/product/mb/H87-G43.html";, NULL), B("MSI", "MS-7817 (H81M-E33)", OK, "http://www.msi.com/product/mb/H81ME33.html";, NULL), @@ -1028,11 +1048,13 @@ B("Sun", "Fire x4540", BAD, "http://www.sun.com/servers/x64/x4540/";, "No public report found. May work now."), B("Sun", "Fire x4600", BAD, "http://www.sun.com/servers/x64/x4600/";, "No public report found. May work now."), B("Sun", "Ultra 40 M2", OK, "http://download.oracle.com/docs/cd/E19127-01/ultra40.ws/820-0123-13/intro.html";, NULL), + B("Supermicro", "A1SAi-2550F", OK, "http://www.supermicro.com/products/motherboard/Atom/X10/A1SAi-2550F.cfm";, NULL), B("Supermicro", "H8QC8", OK, "http://www.supermicro.com/Aplus/motherboard/Opteron/nforce/H8QC8.cfm";, NULL), B("Supermicro", "H8QME-2", OK, "http://www.supermicro.com/Aplus/motherboard/Opteron8000/MCP55/H8QME-2.cfm";, NULL), B("Supermicro", "X10SLM-F", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C220/X10SLM-F.cfm";, "Probing works (Winbond W25Q128, 16384 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked; SMM protection enabled."), B("Supermicro", "X5DP8-G2", OK, "http://www.supermicro.com/products/motherboard/Xeon/E7501/X5DP8-G2.cfm";, NULL), B("Supermicro", "X7DBT-INF", OK, "http://www.supermicro.com/products/motherboard/Xeon1333/5000P/X7DBT-INF.cfm";, NULL), + B("Supermicro", "X7DWT", OK, "http://www.supermicro.com/products/motherboard/Xeon1333/5400/X7DWT.cfm";, "Used in Dell C6100 servers."), B("Supermicro", "X7SPA-H(F)", OK, "http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPA.cfm?typ=H";, NULL), B("Supermicro", "X7SPE-HF-D525", OK, "http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPE-HF-D525.cfm";, NULL), B("Supermicro", "X8DT3", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT3.cfm";, NULL), @@ -1129,19 +1151,22 @@ B("Acer", "Aspire One", BAD, NULL, "http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html";), B("ASUS", "A8Jm", OK, NULL, NULL), B("ASUS", "Eee PC 701 4G", BAD, "http://www.asus.com/Eee/Eee_PC/Eee_PC_4G/";, "It seems the chip (25X40) is behind some SPI flash translation layer (likely in the EC, the ENE KB3310)."), - B("ASUS", "M6Ne", NT, "http://www.asus.com/Notebooks/Versatile_Performance/M6NNe/";, "Untested board enable."), + B("ASUS", "M6Ne", NT, NULL, "Untested board enable."), + B("ASUS", "U38N", OK, NULL, NULL), B("Clevo", "P150HM", BAD, "http://www.clevo.com.tw/en/products/prodinfo_2.asp?productid=307";, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("Dell", "Latitude D630", OK, NULL, NULL), B("Dell", "Inspiron 1420", OK, NULL, NULL), B("Dell", "Latitude CPi A366XT", BAD, "http://www.coreboot.org/Dell_Latitude_CPi_A366XT";, "The laptop immediately powers off if you try to hot-swap the chip. It's not yet tested if write/erase would work on this laptop."), B("Dell", "Vostro 3700", BAD, NULL, "Locked ME, see https://flashrom.org/pipermail/flashrom/2012-May/009197.html.";), B("Dell", "Latitude E6520", BAD, NULL, "Locked ME, see https://flashrom.org/pipermail/flashrom/2012-June/009420.html.";), B("Elitegroup", "A928", OK, NULL, "Bootsector is locked and needs to be skipped with a layout file (writeable address range is 00000000:0003bfff)."), + B("Fujitsu", "Amilo Xi 3650", OK, NULL, NULL), B("HP/Compaq", "EliteBook 8560p", BAD, NULL, "SPI lock down, SMM protection, PR in BIOS region, read-only descriptor, locked ME region."), B("HP/Compaq", "nx9005", BAD, "http://h18000.www1.hp.com/products/quickspecs/11602_na/11602_na.HTML";, "Shuts down when probing for a chip. https://flashrom.org/pipermail/flashrom/2010-May/003321.html";), B("HP/Compaq", "nx9010", BAD, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00348514";, "Hangs upon '''flashrom -V''' (needs hard power-cycle then)."), B("IBM/Lenovo", "ThinkPad T40p", BAD, "http://www.thinkwiki.org/wiki/Category:T40p";, NULL), - B("IBM/Lenovo", "ThinkPad T420", BAD, "http://www.thinkwiki.org/wiki/Category:T420";, "Probing works (Macronix MX25L6405, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs) and ME is locked. Also, a Protected Range is locking the top range of the BIOS region (presumably the boot block)."), B("IBM/Lenovo", "ThinkPad T410s", BAD, "http://www.thinkwiki.org/wiki/Category:T410s";, "Probing works (Winbond W25X64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs) and ME is locked. Also, a Protected Range is locking the top range of the BIOS region (presumably the boot block)."), + B("IBM/Lenovo", "ThinkPad T420", BAD, "http://www.thinkwiki.org/wiki/Category:T420";, "Probing works (Macronix MX25L6405, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs) and ME is locked. Also, a Protected Range is locking the top range of the BIOS region (presumably the boot block)."), B("IBM/Lenovo", "ThinkPad X1", BAD, "http://www.thinkwiki.org/wiki/Category:X1";, "Probing works (ST M25PX64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs) and ME is locked. Also, a Protected Range is locking the top range of the BIOS region (presumably the boot block)."), B("IBM/Lenovo", "ThinkPad T530", DEP, "http://www.thinkwiki.org/wiki/Category:T530";, "Works fine but only with coreboot (due to locked regions and additional PR restrictions)."), B("IBM/Lenovo", "ThinkPad 240", BAD, "http://www.stanford.edu/~bresnan//tp240.html";, "Seems to (partially) work at first, but one block/sector cannot be written which then leaves you with a bricked laptop. Maybe this can be investigated and fixed in software later."), Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Sun Jan 17 00:45:25 2016 (r1916) +++ trunk/programmer.h Sat Jan 23 17:16:49 2016 (r1917) @@ -592,8 +592,8 @@ #define MAX_DATA_WRITE_UNLIMITED 256 struct spi_master { enum spi_controller type; - unsigned int max_data_read; - unsigned int max_data_write; + unsigned int max_data_read; // (Ideally,) maximum data read size in one go (excluding opcode+address). + unsigned int max_data_write; // (Ideally,) maximum data write size in one go (excluding opcode+address). int (*command)(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); int (*multicommand)(struct flashctx *flash, struct spi_command *cmds); Modified: trunk/serprog.c ============================================================================== --- trunk/serprog.c Sun Jan 17 00:45:25 2016 (r1916) +++ trunk/serprog.c Sat Jan 23 17:16:49 2016 (r1917) @@ -232,7 +232,7 @@ if (c == S_NAK) return 1; if (c != S_ACK) { - msg_perr("Error: invalid response 0x%02X from device\n", c); + msg_perr("Error: invalid response 0x%02X from device (to command 0x%02X)\n", c, command); return 1; } if (retlen) { _______________________________________________ flashrom mailing list flashrom@flashrom.org http://www.flashrom.org/mailman/listinfo/flashrom
