On Sat, 12 Mar 2016 16:08:54 +0000 Adrian Graham <[email protected]> wrote:
> On 12/03/2016 15:46, "Stefan Tauner" <[email protected]> > wrote: > > > Ah, OK. In that case I don't know why it didn't finish writing then, unless > my temporary connections between RasPi and flash moved a little bit or just > aren't tight enough for a good signal. Cable length maybe - signal path is > RasPi -> 40pin IDE cable -> hookup wires (15cm) soldered to the pads on the > chip. Now that I've got more female-female jumper wires I can go direct to > the Pi to shorten the distance drastically. That makes a huge difference for the quality of the signals :) > Currently I've got the flash hooked up to a parallel port on an old desktop > so I can use SPIPGMW which has just dumped the whole 16mb to disk so I can > try writing it back to see if it fails indicating a bad area in flash. That will be quite slow, but in any case please report back with a complete verbose log (-o write.txt creates one easily). -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] https://www.flashrom.org/mailman/listinfo/flashrom
