Using a legacy board as a flasher, flashrom nagged me to submit a report.
Nice software, thanks.
flashrom v0.9.8-unknown on FreeDOS 7 (i786) flashrom was built with libpci 3.1.5, GCC 4.9.2, little endian Command line (6 args): a:/flashrom.exe -p internal -r oldp4.rom -o read.log Calibrating delay loop... OS timer resolution is 1870000 usecs, 795M loops per second, delay more than 10% too short (got 11% of expected delay), recalculating... 926M loops per second, delay more than 10% too short (got 0% of expected delay), recalculating... 968M loops per second, delay more than 10% too short (got 5% of expected delay), recalculating... 886M loops per second, delay more than 10% too short (got 20% of expected delay), recalculating... 926M loops per second, delay loop is unreliable, trying to continue 10 myus = 0 us, 100 myus = 0 us, 1000 myus = 0 us, 10000 myus = 0 us, 7480000 myus = 2800000 us, OK. Initializing internal programmer Error accessing low megabyte, 0x100000 bytes at 0x00000000 dpmi mmap failed: No such file or directory (ENOENT) Failed getting access to coreboot low tables. Using Internal DMI decoder. Error accessing DMI, 0x10000 bytes at 0x000f0000 dpmi mmap failed: No such file or directory (ENOENT) Found Winbond Super I/O, id 0x52 Found chipset "Intel ICH5/ICH5R" with PCI ID 8086:24d0. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode disabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x80000 bytes BIOS_CNTL = 0x01: BIOS Lock Enable: disabled, BIOS Write Enable: enabled OK. Enabling full flash access for board "ASRock 775i65G"... Intel ICH LPC bridge: Raising GPIO23. OK. The following protocols are supported: FWH. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x7e, id2 0xb7, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH00B4, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH004, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x7e, id2 0xb7, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Found Winbond flash chip "W39V040FB" (512 kB, FWH) mapped at physical address 0xfff80000. Lockout bits: Hardware bootblock locking (#TBL) is not active. Hardware remaining chip locking (#WP) is not active.. Lock status of block at 0xff780002 is Write Lock (Default State). Lock status of block at 0xff790002 is Write Lock (Default State). Lock status of block at 0xff7a0002 is Write Lock (Default State). Lock status of block at 0xff7b0002 is Write Lock (Default State). Lock status of block at 0xff7c0002 is Write Lock (Default State). Lock status of block at 0xff7d0002 is Write Lock (Default State). Lock status of block at 0xff7e0002 is Write Lock (Default State). Lock status of block at 0xff7f0002 is Write Lock (Default State). Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Found Winbond flash chip "W39V040FB" (512 kB, FWH). === This flash part has status UNTESTED for operations: ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to [email protected] if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Changed lock bits at 0xff780002 to 0x00. Changed lock bits at 0xff790002 to 0x00. Changed lock bits at 0xff7a0002 to 0x00. Changed lock bits at 0xff7b0002 to 0x00. Changed lock bits at 0xff7c0002 to 0x00. Changed lock bits at 0xff7d0002 to 0x00. Changed lock bits at 0xff7e0002 to 0x00. Changed lock bits at 0xff7f0002 to 0x00. Reading flash... done. Restoring PCI config space for 00:1f:0 reg 0x4e
flashrom v0.9.8-unknown on FreeDOS 7 (i786) flashrom was built with libpci 3.1.5, GCC 4.9.2, little endian Command line (6 args): a:/flashrom.exe -p internal -w P4I65G_1.40 -o write.log Calibrating delay loop... OS timer resolution is 1970000 usecs, 971M loops per second, delay more than 10% too short (got 10% of expected delay), recalculating... 904M loops per second, delay more than 10% too short (got 3% of expected delay), recalculating... 827M loops per second, delay more than 10% too short (got 18% of expected delay), recalculating... 785M loops per second, delay more than 10% too short (got 13% of expected delay), recalculating... 914M loops per second, delay loop is unreliable, trying to continue 10 myus = 0 us, 100 myus = 0 us, 1000 myus = 0 us, 10000 myus = 0 us, 7880000 myus = 3080000 us, OK. Initializing internal programmer Error accessing low megabyte, 0x100000 bytes at 0x00000000 dpmi mmap failed: No such file or directory (ENOENT) Failed getting access to coreboot low tables. Using Internal DMI decoder. Error accessing DMI, 0x10000 bytes at 0x000f0000 dpmi mmap failed: No such file or directory (ENOENT) Found Winbond Super I/O, id 0x52 Found chipset "Intel ICH5/ICH5R" with PCI ID 8086:24d0. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode disabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x80000 bytes BIOS_CNTL = 0x01: BIOS Lock Enable: disabled, BIOS Write Enable: enabled OK. Enabling full flash access for board "ASRock 775i65G"... Intel ICH LPC bridge: Raising GPIO23. OK. The following protocols are supported: FWH. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x7e, id2 0xb7, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH00B4, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH004, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x7e, id2 0xb7, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Found Winbond flash chip "W39V040FB" (512 kB, FWH) mapped at physical address 0xfff80000. Lockout bits: Hardware bootblock locking (#TBL) is not active. Hardware remaining chip locking (#WP) is not active.. Lock status of block at 0xff780002 is Full Access. Lock status of block at 0xff790002 is Full Access. Lock status of block at 0xff7a0002 is Full Access. Lock status of block at 0xff7b0002 is Full Access. Lock status of block at 0xff7c0002 is Full Access. Lock status of block at 0xff7d0002 is Full Access. Lock status of block at 0xff7e0002 is Full Access. Lock status of block at 0xff7f0002 is Full Access. Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Found Winbond flash chip "W39V040FB" (512 kB, FWH). === This flash part has status UNTESTED for operations: ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to [email protected] if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Lock bits at 0xff780002 not changed. Lock bits at 0xff790002 not changed. Lock bits at 0xff7a0002 not changed. Lock bits at 0xff7b0002 not changed. Lock bits at 0xff7c0002 not changed. Lock bits at 0xff7d0002 not changed. Lock bits at 0xff7e0002 not changed. Lock bits at 0xff7f0002 not changed. Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x00ffff:S, 0x010000-0x01ffff:EW, 0x020000-0x02ffff:EW, 0x030000-0x03ffff:EW, 0x040000-0x04ffff:EW, 0x050000-0x05ffff:EW, 0x060000-0x06ffff:E, 0x070000-0x07ffff:EW Erase/write done. Verifying flash... VERIFIED. Restoring PCI config space for 00:1f:0 reg 0x4e
_______________________________________________ flashrom mailing list [email protected] https://www.flashrom.org/mailman/listinfo/flashrom
