Hi Zak, On 21.03.2017 17:28, Zak wrote: > Hello, > > I got flashrom compiled for windows and it works like a charm (has to > tweet the code a little, add data for the chips i want to work with, add > 4BA and fast rading for FT2232), it works perfectly fine but only for > the port A (flashrom -p ft2232_spi:type=2232H,port=A) > > Using default programmer "ft2232_spi" with arguments "type=2232H,port=A". > Calibrating delay loop... OK. > Found Macronix flash chip "flashrom -p > ft2232_spi:type=2232H,port=AMX25L25665E" (32768 kB, SPI) > on ft2232_spi. > Reading flash... (0% to done.) > > If i use the port B (flashrom -p ft2232_spi:type=2232H,port=B), i get > this error > > Calibrating delay loop... OK. > Unable to reset FTDI device (USB device unavailable). > Unable to set latency timer (USB device unavailable). > Unable to set bitmode to SPI (USB device unavailable). > ftdi_write_data: -666, USB device unavailable > Error: Programmer initialization failed. > > I get this error also if i try to compile with make > CONFIG_DEFAULT_PROGRAMMER=PROGRAMMER_FT2232_SPI > CONFIG_DEFAULT_PROGRAMMER_ARGS="type=2232H,port=B" to force port B > > I looked around i didn't find any solution to fix this, anyone could > give me a hand?
the problem probably lies within your (windows) version of libftdi. I'd try another OS / libftdi to rule that out. Nico _______________________________________________ flashrom mailing list flashrom@flashrom.org https://www.flashrom.org/mailman/listinfo/flashrom
