On Wed, Dec 6, 2017 at 8:29 PM, David Velasco <[email protected]> wrote:
> Hi carl, > > I have the following error: > > # flashrom --programmer internal > flashrom v0.9.9-rc1-r1942 on Linux 4.10.0-40-generic (x86_64) > flashrom is free software, get the source code at https://flashrom.org > > Calibrating delay loop... OK. > WARNING: *No chipset found. Flash detection will most likely fail.* > No EEPROM/flash device found. > Note: flashrom can never write if the flash chip isn't found automatically. > # flashrom --programmer internal > flashrom v0.9.9-rc1-r1942 on Linux 4.10.0-40-generic (x86_64) > flashrom is free software, get the source code at https://flashrom.org > > Calibrating delay loop... OK. > WARNING: No chipset found. Flash detection will most likely fail. > No EEPROM/flash device found. > Note: flashrom can never write if the flash chip isn't found automatically. > # flashrom > flashrom v0.9.9-rc1-r1942 on Linux 4.10.0-40-generic (x86_64) > flashrom is free software, get the source code at https://flashrom.org > > Please select a programmer with the --programmer parameter. > Previously this was not necessary because there was a default set. > To choose the mainboard of this computer use 'internal'. Valid choices are: > internal, dummy, nic3com, nicrealtek, gfxnvidia, drkaiser, satasii, atavia, > it8212, serprog, buspirate_spi, dediprog, rayer_spi, pony_spi, nicintel, > nicintel_spi, nicintel_eeprom, ogp_spi, satamv, linux_spi, pickit2_spi, > ch341a_spi. > > > I can give you the result of > > lspci -nnvvvxxx > > Yes, please copy + paste lspci output to https://paste.flashrom.org/ .
_______________________________________________ flashrom mailing list [email protected] https://mail.coreboot.org/mailman/listinfo/flashrom
