Sorry, forgot the patch... *palmface*
diff -rupN flashrom-1.0-clean/flashchips.c flashrom-1.0-dev/flashchips.c
--- flashrom-1.0-clean/flashchips.c 2017-06-05 17:42:16.000000000 +0200
+++ flashrom-1.0-dev/flashchips.c 2018-06-07 11:57:20.136884990 +0200
@@ -11057,6 +11057,37 @@ const struct flashchip flashchips[] = {
{
.vendor = "Sanyo",
+ .name = "LE25FU106B",
+ .bustype = BUS_SPI,
+ .manufacture_id = SANYO_ID,
+ .model_id = SANYO_LE25FU106B,
+ .total_size = 128,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN,
+ .tested = TEST_OK_PREW,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
+ .eraseblocks = { {2 * 1024, 64} },
+ .block_erase = spi_block_erase_d7,
+ }, {
+ .eraseblocks = { {32 * 1024, 4} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {128 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_bp1_srwd,
+ .unlock = spi_disable_blockprotect_bp1_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2300, 3600},
+ },
+
+ {
+ .vendor = "Sanyo",
.name = "LE25FU406B",
.bustype = BUS_SPI,
.manufacture_id = SANYO_ID,
diff -rupN flashrom-1.0-clean/flashchips.h flashrom-1.0-dev/flashchips.h
--- flashrom-1.0-clean/flashchips.h 2017-11-04 17:07:23.000000000 +0100
+++ flashrom-1.0-dev/flashchips.h 2018-06-07 11:40:58.180253130 +0200
@@ -598,6 +598,7 @@
#define SANYO_LE25FW406 0x07 /* RES2 */
#define SANYO_LE25FW418A 0x10 /* RES2 and some weird 1 byte RDID variant */
#define SANYO_LE25FW406A 0x1A /* RES2, no datasheet */
+#define SANYO_LE25FU106B 0x1d62
#define SANYO_LE25FU406B 0x1E /* LE25FW418A without HD_READ mode option variant */
#define SANYO_LE25FU406C 0x0613 /* Also known as LE25U40CMC apparently */
#define SANYO_LE25FW806 0x26 /* RES2 and some weird 1 byte RDID variant */
_______________________________________________
flashrom mailing list
[email protected]
https://mail.coreboot.org/mailman/listinfo/flashrom
