hi I am using the following mobo to play and update my thrashy bios file from f2 to f6 version and the bios chip is on the list of supported devices but I got an error in looking for erase function http://www.gigabyte.ru/products/page/mb/ga-8ipe1000-g_3x#kf GA-8IPE1000-G (rev. 3.x) here the output of the command flashrom --programmer internal -w 8ipekg.f6 https://pastebin.com/nkDDXZ34 I try it under freebsd 11.1 and even these advice doesn't help cat /etc/rc.securelevel securelevel=-1 SST49LF002A/B 256 FWH OK OK OK OK 3.000 3.600 I didn't find anything but tuning secure level in FAQ section is there any other workaround I can go for flash these mobo successfully? I installed winxp but I missing the point that gigabyte flash exe not work from desktop and there is no clear DOS to go for it, autoexec.bat with such command flash.exe 8pipekg.f6 dosn't work and I missing any floppy diskette for sure I wont to waste CDR on freedos or even format one of 16Gb flash cards for freedos but...well its not short way
i attach file with info and paste
i cant enter in hexchat after registering using sasl auth..strange but these complicated to me...
hi I am using the following mobo to play and update my thrashy bios file from f2 to f6 version and the bios chip is on the list of supported devices but I got an error in looking for erase function http://www.gigabyte.ru/products/page/mb/ga-8ipe1000-g_3x#kf GA-8IPE1000-G (rev. 3.x) here the output of the command flashrom --programmer internal -w 8ipekg.f6 https://pastebin.com/nkDDXZ34 I try it under freebsd 11.1 and even these advice doesn't help cat /etc/rc.securelevel securelevel=-1 SST49LF002A/B 256 FWH OK OK OK OK 3.000 3.600 I didn't find anything but tuning secure level in FAQ section is there any other workaround I can go for flash these mobo successfully? I installed winxp but I missing the point that gigabyte flash exe not work from desktop and there is no clear DOS to go for it, autoexec.bat with such command flash.exe 8pipekg.f6 dosn't work and I missing any floppy diskette for sure I wont to waste CDR on freedos or even format one of 16Gb flash cards for freedos but...well its not short way
http://www.gigabyte.ru/products/page/mb/ga-8ipe1000-g_3x#kf in case you would try to find it I have rev.3.x :: GA-8IPE1000-G (rev. 3.x) Calibrating delay loop... OK. Found chipset "Intel ICH5/ICH5R". Enabling flash write... OK. Found SST flash chip "SST49LF002A/B" (256 kB, FWH) mapped at physical address 0xfffc0000. Reading old flash chip contents... done. Erasing and writing flash chip... FAILED at 0x00000000! Expected=0xff, Found=0x23, failed byte count from 0x00000000-0x00000fff: 0xff5 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x23, failed byte count from 0x00000000-0x00003fff: 0x3fb5 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. Looking for another erase function. Looking for another erase function. Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Good, writing to the flash chip apparently didn't do anything. This means we have to add special support for your board, programmer or flash chip. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org, thanks! ----------------------------------------------------------------------------- http://paste.flashrom.org/view.php?id=3134 http://paste.flashrom.org/view.php?id=3135
_______________________________________________ flashrom mailing list flashrom@flashrom.org https://mail.coreboot.org/mailman/listinfo/flashrom
