I have used following command to program my Acer C720:
./flashrom -p internal:ich_spi_forces=yes -V -N --ifd -i bios -w
peppy/coreboot-peppy-seabios-latest.ro m > ferr.txt 2>&1
The eprom chip in this computer is: 25Q64FVSIG and yes I have remover write
protection screw.
I have received following response from this flashrom command:---------flashrom
v1.0 on Linux 4.9.0-8-amd64 (x86_64)flashrom is free software, get the source
code at https://flashrom.org
flashrom was built with libpci 3.5.2, GCC 6.3.0 20170516, little endianCommand
line (9 args): ./flashrom -p internal:ich_spi_forces=yes -V -N --ifd -i bios -w
peppy/coreboot-peppy-seabios-latest.romUsing clock_gettime for delay loops
(clk_id: 1, resolution: 1ns).Initializing internal programmerFound candidate
at: 00000500-00000510Found coreboot table at 0x00000500.Found candidate at:
00000000-00000194Found coreboot table at 0x00000000.coreboot table found at
0x7becf000.coreboot header(24) checksum: 72d0 table(404) checksum: f9e3
entries: 10Vendor ID: GOOGLE, part ID: PeppyUsing Internal DMI decoder.DMI
string chassis-type: "Desktop"DMI string system-manufacturer: "GOOGLE"DMI
string system-product-name: "Peppy"DMI string system-version: "1.0"DMI string
baseboard-manufacturer: "GOOGLE"DMI string baseboard-product-name: "Peppy"DMI
string baseboard-version: "1.0"Found chipset "Intel Lynx Point LP Mainstream"
with PCI ID 8086:9c45.This chipset is marked as untested. If you are using an
up-to-date versionof flashrom *and* were (not) able to successfully update your
firmware with it,then please email a report to [email protected] including
a verbose (-V) log.Thank you!Enabling flash write... Root Complex Register
Block address = 0xfed1c000Error accessing ICH RCRB, 0x4000 bytes at
0x00000000fed1c000/dev/mem mmap failed: Operation not permittedFAILED!FATAL
ERROR!Unhandled programmer parameters (possibly due to another failure):
ich_spi_forces=yesError: Programmer initialization failed.--------
Also please find attached output of dmidecoed from this C720 computer:
I will appreciate any suggestion.
# dmidecode 3.0
Getting SMBIOS data from sysfs.
SMBIOS 2.7 present.
10 structures occupying 369 bytes.
Table at 0x7BFD7020.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: coreboot
Version: 4.0-6588-g4acd8ea-dirty
Release Date: 09/04/2014
ROM Size: 8192 kB
Characteristics:
PCI is supported
PC Card (PCMCIA) is supported
BIOS is upgradeable
Selectable boot is supported
ACPI is supported
Targeted content distribution is supported
BIOS Revision: 4.0
Firmware Revision: 0.0
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: GOOGLE
Product Name: Peppy
Version: 1.0
Serial Number: 123456789
UUID: Not Settable
Wake-up Type: Reserved
SKU Number: Not Specified
Family: Not Specified
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: GOOGLE
Product Name: Peppy
Version: 1.0
Serial Number: 123456789
Handle 0x0003, DMI type 3, 21 bytes
Chassis Information
Manufacturer: GOOGLE
Type: Desktop
Lock: Not Present
Version: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Height: Unspecified
Number Of Power Cords: Unspecified
Contained Elements: 0
Handle 0x0004, DMI type 4, 42 bytes
Processor Information
Socket Designation: Not Specified
Type: Central Processor
Family: Pentium Pro
Manufacturer: GenuineIntel
ID: 51 06 04 00 FF FB EB BF
Signature: Type 0, Family 6, Model 69, Stepping 1
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Celeron(R) 2955U @ 1.40GHz
Voltage: Unknown
External Clock: Unknown
Max Speed: Unknown
Current Speed: Unknown
Status: Unpopulated
Upgrade: Other
L1 Cache Handle: Not Provided
L2 Cache Handle: Not Provided
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Core Count: 16
Characteristics: None
Handle 0x0005, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x0006, DMI type 41, 11 bytes
Onboard Device
Reference Designation: lightsensor
Type: Other
Status: Enabled
Type Instance: 51
Bus Address: 0002:44:00.0
Handle 0x0007, DMI type 41, 11 bytes
Onboard Device
Reference Designation: trackpad
Type: Other
Status: Enabled
Type Instance: 37
Bus Address: 0001:67:00.0
Handle 0x0008, DMI type 41, 11 bytes
Onboard Device
Reference Designation: touchscreen
Type: Other
Status: Enabled
Type Instance: 38
Bus Address: 0002:4a:00.0
Handle 0x0009, DMI type 127, 4 bytes
End Of Table
_______________________________________________
flashrom mailing list -- [email protected]
To unsubscribe send an email to [email protected]
