Update: Spare XM25QH128A chips just arrived from China. Successfully flashed a chip with Bus Pirate SPI and patched flashrom. Writing works fine. Laptop boots normally.
> Hey again. > > I was advised there was a typo in my chip list. > > Here: #define XMC_XM25QH128A 0x1708 > Should be: #define XMC_XM25QH128A 0x7018 > > Anyhow, I have downloaded flashrom master, patched it with this data and > recompiled it. I'm reporting that the probing and reading appears to be > working for XM25QH128A. BIOS is now dumped. I'll test writing/erasing > once I get the spare chips. > > *On a side note:* > Be sure to connect all chip pins to their respective terminals. For > example, I originally believed this XMC chip was unsupported because it > failed to probe/read while the Winbond one worked fine with the same > setup. I left the /WP and /HOLD pins unconnected in my setup, but after > connecting them both to Vcc via a 4k7 resistor the reading worked perfectly. > > > See yas! > > >> #define XMC_ID 0x20 /* same as ST_ID */ >> #define XMC_XM25QH256B 0x6019 >> #define XMC_XM25QH128A 0x1708 >> #define XMC_XM25QH128B 0x6018 >> #define XMC_XM25QH64A 0x7017 >> #define XMC_XM25QH64B 0x6017 >> #define XMC_XM25QH32B 0x4016 /* 0x6016 for QPI mode */ >> #define XMC_XM25QH16B 0x4015 >> #define XMC_XM25QH80B 0x4014 >> #define XMC_XM25QH40B 0x4013 >> #define XMC_XM25QU256B 0x7019 >> #define XMC_XM25QU128B 0x5018 >> #define XMC_XM25QU64A 0x3817 >> #define XMC_XM25QU64B 0x5017 >> #define XMC_XM25QU40B 0x5013 >> #define XMC_XM25QU20B 0x5012 > > > _______________________________________________ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-le...@flashrom.org
