hi there at flashrom.org, while following the procedure described in https://ostoday.org/linux/how-to-boot-ubuntu-from-usb-on-chromebook.html to'install the https://johnlewis.ie/Chromebook-ROMs/ for my baywell gnawty not yet listed in https://johnlewis.ie/custom-Chromebook-firmware/rom-download/ and hopefully not bricked i am told by flashrom itself that i am supposed to report a bug in flashrom:
INPUT REQUIRED: About to flash your gnawty's RW_LEGACY slot, repeat 'If this bricks my gnawty, on my head be it!' observing exact case and punctuation: If this bricks my gnawty, on my head be it! + echo '' + [[ If this bricks my gnawty, on my head be it! != \I\f\ \t\h\i\s\ \b\r\i\c\k\s\ \m\y\ \g\n\a\w\t\y\,\ \o\n\ \m\y\ \h\e\a\d\ \b\e\ \i\t\! ]] + sudo flashrom -w -i RW_LEGACY:legacy-seabios-baywell-latest.cbfs flashrom v0.9.9 : 35f1c70c : Sep 12 2019 16:01:11 UTC on Linux 4.4.190-16770-gb3c36ab5af98 (x86_64) flashrom v0.9.9 : 35f1c70c : Sep 12 2019 16:01:11 UTC on Linux 4.4.190-16770-gb3c36ab5af98 (x86_64) Calibrating delay loop... OK. coreboot table found at 0x7ae6e000. Found chipset "Intel Baytrail-M". Enabling flash write... SPI Configuration is locked down. OK. Trying to unmap a nonexisting mapping! Please report a bug at [email protected] Trying to unmap a nonexisting mapping! Please report a bug at [email protected] Trying to unmap a nonexisting mapping! Please report a bug at [email protected] Trying to unmap a nonexisting mapping! Please report a bug at [email protected] Trying to unmap a nonexisting mapping! Please report a bug at [email protected] Trying to unmap a nonexisting mapping! Please report a bug at [email protected] Trying to unmap a nonexisting mapping! Please report a bug at [email protected] Trying to unmap a nonexisting mapping! Please report a bug at [email protected] Trying to unmap a nonexisting mapping! Please report a bug at [email protected] Trying to unmap a nonexisting mapping! Please report a bug at [email protected] Block protection could not be disabled! spi_write_cmd failed during command execution at address 0x0 spi_simple_write_cmd failed during command execution spi_simple_write_cmd failed during command execution Erasing and writing flash chip... Verifying flash... VERIFIED. SUCCESS + readonly AREA + readonly R_OR_W + echo ' INFO: Good, your gnawty'\''s RW_LEGACY slot was written successfully. You can hopefully, safely reboot! ' INFO: Good, your gnawty's RW_LEGACY slot was written successfully. You can hopefully, safely reboot! + rm_files + rm -rf /tmp/flash.crbk.rom + exit 0 _______________________________________________ flashrom mailing list -- [email protected] To unsubscribe send an email to [email protected]
