Hello Hubert, There was some discussion about Skylake-D a few months ago: https://www.mail-archive.com/[email protected]/msg14426.html . There were some PCI IDs which were added (https://review.coreboot.org/c/flashrom/+/39780) after flashrom-v1.2
The problems you describe are strange, indeed... Can send a verbose log using `-V`? The W25Q256JVFIQ is also in the table already (as W25Q256.V), so I'm curious why you needed to add another chip entry. On Mon, Jun 1, 2020 at 5:10 PM HubertLin <[email protected]> wrote: > > Hi, > > > > I would like to use flashrom to upgrade BIOS on Skylake-D platform. > > I have done some work to unlock ME and fill W25Q256JVFIQ table in > flashschips.c. > > But there still have some opcode problem. > > > > Have you try flashrom on Skylake-D platform before? > > Is there any temporary patch for Skylake-D platform after v1.2 version. > > I would like to try it, may you please help me? > > > > The problem I meet as below, > > 1. ich_spi_send_command: Internal command size error for opcode 0xe9, got > writecnt=1, want >=4 > > 2. Probing for Winbond W25Q256JVFIQ, 32768 kB: Invalid OPCODE 0x9f, will > not execut > > 3. Probing for Winbond W25Q256JVFIQ, 32768 kB: probe_spi_rdid_generic: > id1 0xf7, id > > > > Thank you > > BR, Hubert.lin > > > > _______________________________________________ > flashrom mailing list -- [email protected] > To unsubscribe send an email to [email protected] _______________________________________________ flashrom mailing list -- [email protected] To unsubscribe send an email to [email protected]
