Please check the possible failure reasons that aren't a fault of flashrom: 1) old flashrom version. Compile the latest version from the source code 2) unreliable connection or too long cables between a flasher and a chip
On Fri, Nov 20, 2020 at 3:18 AM Igor Omelchenko <[email protected]> wrote: > > Adding logs. > > > > ср, 18 нояб. 2020 г. в 09:00, Igor Omelchenko <[email protected]>: >> >> Hello! >> >> Tried to flash BIOS on "W25Q256.V" chip, got below errors: >> (Tried with 24-45k spispeed. tried with -n and without -n) >> Thanks for your amazing work! >> >> squid@squid:~$ sudo flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=24000 >> -n -w /squid/Squid/Files/SES5_000000_2020WW45.1.01.bin >> flashrom on Linux 4.14.108-ti-r137 (armv7l) >> flashrom is free software, get the source code at https://flashrom.org >> >> Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). >> Found Winbond flash chip "W25Q256.V" (32768 kB, SPI) on linux_spi. >> Reading old flash chip contents... done. >> Erasing and writing flash chip... FAILED at 0x00000002! Expected=0xff, >> Found=0x7f, failed byte count from 0x00000000-0x00000fff: 0xffc >> ERASE FAILED! >> Reading current flash chip contents... done. Looking for another erase >> function. >> FAILED at 0x00000002! Expected=0xff, Found=0x7f, failed byte count from >> 0x00000000-0x00007fff: 0x7fee >> ERASE FAILED! >> Reading current flash chip contents... done. Looking for another erase >> function. >> FAILED at 0x00000002! Expected=0xff, Found=0x7f, failed byte count from >> 0x00000000-0x0000ffff: 0xffde >> ERASE FAILED! >> Reading current flash chip contents... done. Looking for another erase >> function. >> FAILED at 0x00000002! Expected=0xff, Found=0x7f, failed byte count from >> 0x00000000-0x01ffffff: 0x1ffbf90 >> ERASE FAILED! >> Reading current flash chip contents... done. Looking for another erase >> function. >> FAILED at 0x00000002! Expected=0xff, Found=0x7f, failed byte count from >> 0x00000000-0x01ffffff: 0x1ffbe3a >> ERASE FAILED! >> Reading current flash chip contents... done. Looking for another erase >> function. >> Looking for another erase function. >> Looking for another erase function. >> No usable erase functions left. >> FAILED! >> Uh oh. Erase/write failed. Checking if anything has changed. >> Reading current flash chip contents... done. >> Apparently at least some data has changed. >> Your flash chip is in an unknown state. >> Please report this on IRC at chat.freenode.net (channel #flashrom) or >> mail [email protected], thanks! >> >> -- >> Omelchenko Igor >> 0543-066-855 > > > > -- > Omelchenko Igor > 0543-066-855 > _______________________________________________ > flashrom mailing list -- [email protected] > To unsubscribe send an email to [email protected] _______________________________________________ flashrom mailing list -- [email protected] To unsubscribe send an email to [email protected]
