Hello,
I have verified the current flashrom release in git corrects the problem
on my system :
sudo flashrom -p internal
flashrom v1.2-163-g855d6b6 on Linux 5.10.0-051000-lowlatency
(x86_64)
flashrom is free software, get the source code at
https://flashrom.org
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
Found chipset "AMD FP4".
Enabling flash write... Warning: spireadmode not set, leaving
spireadmode unchanged.Warning: spispeed not set, leaving
spispeed unchanged.OK.
Found Winbond flash chip "W25Q128.W" (16384 kB, SPI) mapped at
physical address 0x00000000ff000000.
No operations were specified.
Thank a lot !
Jean-Paul Crespy
Le 16/12/2020 à 21:52, Clay Daniels a écrit :
Edward, thanks a lot! I did a "git clone
https://github.com/flashrom/flashrom
<https://github.com/flashrom/flashrom>
Then navigated to flashrom, did a make, make install, (skipped make
clean for now)
Then:
root@clay-MS-7C37:~/flashrom# flashrom -p internal
flashrom v1.2-163-g855d6b6 on Linux 5.8.0-25-generic (x86_64)
flashrom is free software, get the source code at https://flashrom.org
<https://flashrom.org>
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
Found chipset "AMD FP4".
Enabling flash write... Warning: spireadmode not set, leaving
spireadmode unchanged.Warning: spispeed not set, leaving spispeed
unchanged.OK.
Found Winbond flash chip "W25Q256.W" (32768 kB, SPI) mapped at
physical address 0x00000000fe000000.
No operations were specified.
root@clay-MS-7C37:~/flashrom#
It worked great! I have been looking for this and following it on
Gerrit. I see the merge is fresh, 10 hours old. I have a list of at
least seven other folks who have 0x59 & 0x61 boards and will notify
them too. I do have one who has an 0x51 board with a 0x51 board which
is the other email from/to Jean-Paul Crespy. The 0x51 was also listed
in Rene Rebe's patch from the flashrom list of Oct 12.
Anyway, thanks for all your work. I did notice you did more than just
add 0x59 & 0x61, you made deeper changes that Rene did not think
about, and all for the better I must say.
Clay
On Wed, Dec 16, 2020 at 4:32 AM Edward O'Callaghan
<[email protected] <mailto:[email protected]>> wrote:
I just noticed this email while searching for 0x61 and thought I
would mention that the support for Ryzen style FCH's is actually
done and has merged. Feel free to give the tip of the tree a go
for your board and let me know if you have any issues with it!
Kind regards,
Edward.
On Wed, 16 Dec 2020 at 17:20, Clay Daniels
<[email protected] <mailto:[email protected]>> wrote:
On Tue, Dec 15, 2020 at 4:27 PM Jean-Paul Crespy via flashrom
<[email protected] <mailto:[email protected]>> wrote:
Hello,
As indicated in error message (attached file
"flashrom.log"), I transmit
you the requested information.
Best regards
Jean-Paul Crespy
I have a similar AMD motherboard as you, and when I first
tried playing with flashrom at the end of August I installed
flashrom on FreeBSD. I got the same message as you:
"FCH device found but SMBus revision 0x61 does not match known
values."
Well, I am retired and messing with computers is my hobby, so
I thought maybe trying a Linux would work better with
flashrom, and installed Ubuntu. I still got the same message,
and no real answer until Rene' Rebe posted this email on Oct 12:
https://mail.google.com/mail/u/0/?tab=wm&ogbl#label/coreboot%2Fflashrom/WhctKJWHzSmQKFLjFkZrdWlXtzblWZTQhgLHvjxvmljHgPQLwpSfpwJdZrBqSvCfxLDJskv
<https://mail.google.com/mail/u/0/?tab=wm&ogbl#label/coreboot%2Fflashrom/WhctKJWHzSmQKFLjFkZrdWlXtzblWZTQhgLHvjxvmljHgPQLwpSfpwJdZrBqSvCfxLDJskv>
What I realized was that I needed to download the source,
modify a line to include my particular spi chip, compile and
install flashrom myself. I looked at the documentation, asked
questions, and IT WORKED.
And, besides being able to read my flash chip with flashrom, I
have been able to use it to write a stock bios update from MSI
on my x570 motherboard, and IT WORKED. The first place to look
is here:
https://www.flashrom.org/Downloads
<https://www.flashrom.org/Downloads>
So look at Rene's email & the flashrom download & install
info, and ask more questions. Most everyone here is very
willing to help.
And, there is a fix in the works on Gerrit by the flashrom
developers, but it's not yet released.
You might enjoy the #flashrom & #coreboot channels on Freenode
IRC.
Best of luck,
Clay
_______________________________________________
flashrom mailing list -- [email protected]
<mailto:[email protected]>
To unsubscribe send an email to [email protected]
<mailto:[email protected]>
_______________________________________________
flashrom mailing list -- [email protected]
To unsubscribe send an email to [email protected]
