Hello,
I have been failing to flash libreboot rom on a X200 with a Beaglebone external flashing.
Please check logs and tell me what the cause do you think.
I succeeded just once between the two logs.
But this is not the first time succeeded. I mean I have been using the laptop for around a year with libreboot.
thanks.
Masaru Suzuqi
--
To run a command as administrator (user "root"), use "sudo <command>".
To become root use "sudo -i".
See "man sudo_root" for details.

trisquel@trisquel:~$ ssh [email protected]
The authenticity of host 'beaglebone.local (192.168.6.2)' can't be established. ECDSA key fingerprint is SHA256:7UPnDqxHhM/cTjLfwf3nuKfeZermAMP4AxOaUCARZpk.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'beaglebone.local,192.168.6.2' (ECDSA) to the list of known hosts.
Debian GNU/Linux 9

BeagleBoard.org Debian Image 2019-08-03

Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian

default username:password is [debian:temppwd]

[email protected]'s password:

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Aug  4 02:41:43 2019 from 192.168.7.1
debian@beaglebone:~$ su
Password:
su: Authentication failure
debian@beaglebone:~$ sudo config-pin P9.17 spi_cs
[sudo] password for debian:
debian@beaglebone:~$ sudo config-pin P9.18 spi_cs
Invalid mode: spi_cs
debian@beaglebone:~$ sudo config-pin P9.18 spi
debian@beaglebone:~$ sudo config-pin P9.21 spi
debian@beaglebone:~$ sudo config-pin P9.22 spi_sclk
debian@beaglebone:~$ ls /dev/spides*
ls: cannot access '/dev/spides*': No such file or directory
debian@beaglebone:~$ sudo ls /dev/spides*
ls: cannot access '/dev/spides*': No such file or directory
debian@beaglebone:~$ ls /dev/spidev*
/dev/spidev1.0  /dev/spidev1.1  /dev/spidev2.0  /dev/spidev2.1
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512
[sudo] password for debian:
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
No operations were specified.
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w txt.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... VERIFIED.
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom
[sudo] password for debian:
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00003001! Expected=0x5f, Found=0xcf, failed byte count from 0x00000000-0x007fffff: 0x17d9
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00003001! Expected=0x5f, Found=0x31, failed byte count from 0x00000000-0x007fffff: 0x12fb
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Error: WIP bit after WRSR never cleared
spi_write_status_register failed.
Reading old flash chip contents... done.
Erasing and writing flash chip... FAILED at 0x00003000! Expected=0xff, Found=0x5f, failed byte count from 0x00003000-0x00003fff: 0xb7c
ERASE FAILED!
Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x0000ffff: 0x5da5
ERASE FAILED!
Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x007fffff: 0xf7613
ERASE FAILED!
Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x007fffff: 0xf7613
ERASE FAILED!
Looking for another erase function.
No usable erase functions left.
FAILED!
Uh oh. Erase/write failed. Checking if anything has changed.
Reading current flash chip contents... done.
Good, writing to the flash chip apparently didn't do anything.
Please check the connections (especially those to write protection pins) between the programmer and the flash chip. If you think the error is caused by flashrom
please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom
[sudo] password for debian:
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00003001! Expected=0x5f, Found=0x31, failed byte count from 0x00000000-0x007fffff: 0xc9c
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x46, failed byte count from 0x00000000-0x007fffff: 0x2f45
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x46, failed byte count from 0x00000000-0x007fffff: 0x3605
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Error: WIP bit after WRSR never cleared
spi_write_status_register failed.
Reading old flash chip contents... done.
Erasing and writing flash chip... FAILED at 0x00003000! Expected=0xff, Found=0x46, failed byte count from 0x00003000-0x00003fff: 0x6c0
ERASE FAILED!
Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x0000ffff: 0x47a3
ERASE FAILED!
Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x007fffff: 0xf59d8
ERASE FAILED!
Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x007fffff: 0xf59d8
ERASE FAILED!
Looking for another erase function.
No usable erase functions left.
FAILED!
Uh oh. Erase/write failed. Checking if anything has changed.
Reading current flash chip contents... done.
Good, writing to the flash chip apparently didn't do anything.
Please check the connections (especially those to write protection pins) between the programmer and the flash chip. If you think the error is caused by flashrom
please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom
[sudo] password for debian:
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x43, failed byte count from 0x00000000-0x007fffff: 0x56d9
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w txt.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... delay loop is unreliable, trying to continue OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x43, failed byte count from 0x00000000-0x007fffff: 0x3daaf
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w txt.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Error: WIP bit after WRSR never cleared
spi_write_status_register failed.
Reading old flash chip contents... ^C
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w txt.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x43, failed byte count from 0x00000000-0x007fffff: 0x12066
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Error: WIP bit after WRSR never cleared
spi_write_status_register failed.
Reading old flash chip contents... done.
Erasing and writing flash chip... FAILED at 0x00003000! Expected=0xff, Found=0x43, failed byte count from 0x00003000-0x00003fff: 0x6a8
ERASE FAILED!
Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x0000ffff: 0x4292
ERASE FAILED!
Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x007fffff: 0xb9a82
ERASE FAILED!
Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x007fffff: 0xb9a82
ERASE FAILED!
Looking for another erase function.
No usable erase functions left.
FAILED!
Uh oh. Erase/write failed. Checking if anything has changed.
Reading current flash chip contents... ^C
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w txt.rom
[sudo] password for debian:
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI) on linux_spi.
===
This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to [email protected] if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention
which mainboard or programmer you tested in the subject line.
Thanks for your help!
Read is not working on this chip. Aborting.
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w txt.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI) on linux_spi.
===
This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to [email protected] if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention
which mainboard or programmer you tested in the subject line.
Thanks for your help!
Read is not working on this chip. Aborting.
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI) on linux_spi.
===
This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to [email protected] if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention
which mainboard or programmer you tested in the subject line.
Thanks for your help!
Read is not working on this chip. Aborting.
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x46, failed byte count from 0x00000000-0x007fffff: 0x1507
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w txt.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x46, failed byte count from 0x00000000-0x007fffff: 0x1564
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Error: WIP bit after WRSR never cleared
spi_write_status_register failed.
Reading old flash chip contents... ^C
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
No operations were specified.
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x46, failed byte count from 0x00000000-0x007fffff: 0x40fe
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x41, failed byte count from 0x00000000-0x007fffff: 0xd9f1
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$
--
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Error: WIP bit after WRSR never cleared
spi_write_status_register failed.
Reading old flash chip contents... ^C
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00000000! Expected=0x5a, Found=0xff, failed byte count from 0x00000000-0x007fffff: 0x2978
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Error: WIP bit after WRSR never cleared
spi_write_status_register failed.
Reading old flash chip contents... ^C
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Error: WIP bit after WRSR never cleared
spi_write_status_register failed.
Reading old flash chip contents... ^C
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Error: WIP bit after WRSR never cleared
spi_write_status_register failed.
Reading old flash chip contents... ^C
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00000000! Expected=0x5a, Found=0x08, failed byte count from 0x00000000-0x007fffff: 0x28fb
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/txt.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Error: WIP bit after WRSR never cleared
spi_write_status_register failed.
Reading old flash chip contents... ^C
debian@beaglebone:~$ logout
Connection to beaglebone.local closed.
trisquel@trisquel:~$ ssh [email protected]
Debian GNU/Linux 9

BeagleBoard.org Debian Image 2019-08-03

Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian

default username:password is [debian:temppwd]

[email protected]'s password:

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Aug  4 02:40:49 2019 from 192.168.6.1
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom
[sudo] password for debian:
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00000000! Expected=0x5a, Found=0x08, failed byte count from 0x00000000-0x007fffff: 0x28a5
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$ logout
Connection to beaglebone.local closed.
trisquel@trisquel:~$ ssh [email protected]
Debian GNU/Linux 9

BeagleBoard.org Debian Image 2019-08-03

Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian

default username:password is [debian:temppwd]

[email protected]'s password:

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Aug  4 03:38:32 2019 from 192.168.6.1
debian@beaglebone:~$ ls /dev/spidev*
/dev/spidev1.0  /dev/spidev1.1  /dev/spidev2.0  /dev/spidev2.1
debian@beaglebone:~$ sudo config-pin P9.17 spi_cs
[sudo] password for debian:
Sorry, try again.
[sudo] password for debian:
debian@beaglebone:~$ sudo config-pin p9.18 spi
debian@beaglebone:~$ sudo config-pin p9.21 spi
debian@beaglebone:~$ sudo config-pin p9.22 spi_sclk
debian@beaglebone:~$ ls /dev/spidev*
/dev/spidev1.0  /dev/spidev1.1  /dev/spidev2.0  /dev/spidev2.1
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00000000! Expected=0x5a, Found=0x08, failed byte count from 0x00000000-0x007fffff: 0x1aa0
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Error: WIP bit after WRSR never cleared
spi_write_status_register failed.
Reading old flash chip contents... ^C
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00000000! Expected=0x5a, Found=0x08, failed byte count from 0x00000000-0x007fffff: 0x19bc
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Error: WIP bit after WRSR never cleared
spi_write_status_register failed.
Reading old flash chip contents... ^C
debian@beaglebone:~$ ls /dev/spidev*
/dev/spidev1.0  /dev/spidev1.1  /dev/spidev2.0  /dev/spidev2.1
debian@beaglebone:~$ sudo config-pin P9.17 spi_cs
debian@beaglebone:~$ sudo config-pin p9.18 spi
debian@beaglebone:~$ sudo config-pin p9.21 spi
debian@beaglebone:~$ sudo config-pin p9.22 spi_sclk
debian@beaglebone:~$ ls /dev/spidev*
/dev/spidev1.0  /dev/spidev1.1  /dev/spidev2.0  /dev/spidev2.1
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00000e00! Expected=0xff, Found=0x15, failed byte count from 0x00000000-0x007fffff: 0xec4
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00000e00! Expected=0xff, Found=0x15, failed byte count from 0x00000000-0x007fffff: 0xb48
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00000e00! Expected=0xff, Found=0x15, failed byte count from 0x00000000-0x007fffff: 0xa24
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Error: WIP bit after WRSR never cleared
spi_write_status_register failed.
Reading old flash chip contents... ^C
debian@beaglebone:~$
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Error: WIP bit after WRSR never cleared
spi_write_status_register failed.
Reading old flash chip contents... ^C
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/txt.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... ^C
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Error: WIP bit after WRSR never cleared
spi_write_status_register failed.
Reading old flash chip contents... ^C
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Error: WIP bit after WRSR never cleared
spi_write_status_register failed.
Reading old flash chip contents... ^C
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Error: WIP bit after WRSR never cleared
spi_write_status_register failed.
Reading old flash chip contents... ^C
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00000e00! Expected=0xff, Found=0x15, failed byte count from 0x00000000-0x007fffff: 0xe29
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Error: WIP bit after WRSR never cleared
spi_write_status_register failed.
Reading old flash chip contents... ^C
debian@beaglebone:~$ sudo config-pin P9.17 spi_cs
debian@beaglebone:~$ sudo config-pin p9.18 spi
debian@beaglebone:~$ sudo config-pin p9.21 spi
debian@beaglebone:~$ sudo config-pin p9.22 spi_sclk
debian@beaglebone:~$ ls /dev/spidev*
/dev/spidev1.0  /dev/spidev1.1  /dev/spidev2.0  /dev/spidev2.1
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00000001! Expected=0xa5, Found=0x08, failed byte count from 0x00000000-0x007fffff: 0x11f8
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Error: WIP bit after WRSR never cleared
spi_write_status_register failed.
Reading old flash chip contents... ^C
debian@beaglebone:~$ ls /dev/spidev*
/dev/spidev1.0  /dev/spidev1.1  /dev/spidev2.0  /dev/spidev2.1
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
No operations were specified.
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/txt.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Error: WIP bit after WRSR never cleared
spi_write_status_register failed.
Reading old flash chip contents... ^C
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/txt.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... ^C
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/txt.rom
[sudo] password for debian:
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... ^C
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00000000! Expected=0x5a, Found=0x08, failed byte count from 0x00000000-0x007fffff: 0x8be85
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom
[sudo] password for debian:
flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip...


_______________________________________________
flashrom mailing list -- [email protected]
To unsubscribe send an email to [email protected]

Reply via email to