Hi, your email got mangled or was from the beginning, so I can't reply inline. Better *don't* use HTML when copying program output, or better don't use HTML for emails at all.
This was the interesting part (it would have been easier to spot with less verbosity): > BIOS_CNTL = 0x02: BIOS Lock Enable: enabled, BIOS Write Enable: disabled > Warning: Setting Bios Control at 0xdc from 0x02 to 0x01 failed. > New value is 0x02. This means that your currently running firmware doesn't allow you to write to the flash chip. Sometimes there's an option in the BIOS setup, but IIRC chances are low for this machine. Nico _______________________________________________ flashrom mailing list -- [email protected] To unsubscribe send an email to [email protected]
