Guys, I just tried the new version of flrig(1.0.0b6) with my FT1000MP. I got the CAT to keep running but the frequency display is somehow linked to the selection for RX bandwidth and does not display the correct frequency. During "normal" polling, it appears that a new frequency is constantly being commanded and the RX is being muted at the polling frequency (~10 Hz).
On exit (close program) there is a burst of data that commands the rig to 1.100000000 MHz. We are close, but it appears the data formats are just not correct. For use on most MAC systems the Window for the serial (tty) ports name drop down is too short and the full name of the ports cannot be seen. This is the same for the flrig version on MAC also. In my case the typical port name is: /dev/tty.usbserial-FTDWGU46 (27 Characters). The backend for Hamilb has been working fine in the complied in version. Environment: OS-X 10.6.2 on Intel MAC CAT via external USB to serial Second serial port for the RIGblaster (only using RTS+) Thanks, Mitch Baum AF2M _______________________________________________ fldigi-alpha mailing list [email protected] https://lists.berlios.de/mailman/listinfo/fldigi-alpha
