I am using a brand new Flex 1500 also in Windows with the latest FLDigi. I installed the N8VB virtual comport driver which gave me com ports 4 and 5.
In the "CAT Control" tab (of the PowerSDR 2.05 settings dialog) I checked the "Enable CAT" check box and put in following : Port ; 5 Baud : 19200 Parity : NONE Data : 8 Stop : 1 I did NOT enable PTT control - though COM1 is in the Port field and DTR is selected (that may not be necessary to do) I set the ID as : TS2000 The ID may work on other things such as PowerSDR but it works as TS2000 for me with no problems. In FLDigi I used Hamlib, made sure I checked the box at the very top of the tab, and set the Rig to Kenwood TS-2000 (BETA) I set the COM Port to : 4 NOTE that the comport in PSDR is 5 and FLDigi is 4 I set the Baud rate and Stop bits to 19200 and 1 just as in PSDR The only other thing selected on the tab page is DTR and I'm not sure if it is necessary but since everything works fine I leave it alone. There may be other ways to accomplish the same but I know this works fine for me and my 1500 ---Gary WB8ROL On 7/24/10, P.J. Rovero <[email protected]> wrote: > Normally, I only abuse fldigi alphas under linux, but am working > with a new Windows only (FLEX-1500) radio. > > I have the audio side of flidig working with the virtual audio cables, > but haven't been able to get RigCat or Hamlib control working via > the com0com virtual serial ports. > > Anybody out there have this figured out? > > Thanks, > > P.J. "Josh" Rovero Ham Radio: KK1D > ABC: 9277 1985 BMW R80RT > Web: http://www.roveroresearch.org > > > _______________________________________________ > fldigi-alpha mailing list > [email protected] > https://lists.berlios.de/mailman/listinfo/fldigi-alpha > -- Gary L. Robinson WB8ROL [email protected] _______________________________________________ fldigi-alpha mailing list [email protected] https://lists.berlios.de/mailman/listinfo/fldigi-alpha
