I have both Flex and ColdFusion deployed on my JRun Server, just like
you indicated below:
\jrun4\servers\default
\cfusion-ear
\flex
However CF and Flex cannot find each other. If I try to run mxml under
the \cfusion-ear\cfusion-war folder, nothing happens.
How the heck do you configure the two to talk? What am I missing?
Bernie
--- In flexcoders@yahoogroups.com, Mike Nimer <[EMAIL PROTECTED]> wrote:
>
> Are you running CF in standalone mode or multi-server?
>
> If you are in standalone mode, the easiest is to just install the 2
servers independently of each other and start them both up. Once they
are running CF and Flex will find each other (assuming your flex
server services-config.xml is configured too).
>
> If you are in multi-server mode you can just deploy the flex.war
into a foler next to the cfusion.war (or cfusion-ear folder) and then
you are running both servers independent of each other but in the same
server instance.
>
> so your folders look something like this:
> \jrun4\servers\cfusion
> \cfusion-ear
> \flex
>
> ---nimer
>
>
> ----- Original Message ----
> From: balconsult2001 <[EMAIL PROTECTED]>
> To: flexcoders@yahoogroups.com
> Sent: Monday, July 24, 2006 4:21:57 PM
> Subject: [flexcoders] Re: FDS on CFMX configuration problems
>
>
> Well, according to the technote (http://www.adobe. com/go/4f079a4d) the
> combining of flex and cf is no longer supported.
>
> Can anyone (Adobe), publish an updated, step by step instruction to
> getting a CFMX7, Flex2, and JRun4 installation up and running?
>
> I deploy an application that uses all 3 components mentioned, with CF
> driving and utilizing Flex 1.5 API's that are embedded in my CF
programs.
>
> Thanks,
> Bernie
>
> --- In [EMAIL PROTECTED] ups.com, João Fernandes <joaofernandes@ ...>
> wrote:
> >
> > Jim,
> >
> >
> >
> > Can you follow, the technote steps? For the merging web.xml, copy
> everything except for the messageBrokerServle t from flex web.xml.
> >
> > To work with FDS, your assemblers must be under your server instance
> webroot or add a mapping so it can resolve the path to reach it.
> >
> >
> >
> > In my service-config. xml all non-secured amf/http channels point to
> port 80. Default RMTP and CF RMTP port channels as they are by default
> (2038 & 2048). In my cf admin page, I activated support for remoting +
> FDS defining a channel ID (I set the same as my instance name). If we
> cluster several server instances, I bet that the same name must be
> defined in every single node (not tested).
> >
> >
> >
> >
> >
> > João Fernandes
> > Dep. Informática - Ãrea de Desenvolvimento
> > Cofina media
> >
> > Avenida João Crisóstomo, Nº 72 . 1069-043 Lisboa PORTUGAL
> > Tel (+351) 213 185 200 . Fax (+351) 213 540 370
> > joaofernandes@ ... <mailto:joaofernand es@>
> >
> >
> >
> > From: [EMAIL PROTECTED] ups.com [mailto:[EMAIL PROTECTED] ups.com]
> On Behalf Of Jim
> > Sent: sexta-feira, 7 de Julho de 2006 0:47
> > To: [EMAIL PROTECTED] ups.com
> > Subject: [flexcoders] Re: FDS on CFMX configuration problems
> >
> >
> >
> > Well that is encouraging that you were able to get them working
> > together. Are you using the Mulitserver (JRUN4) option for CFMX7?
> > And if so, is your WEB-INF directory in a webroot? Did you have to
> > do any tweaking to services-config. xml? Write us the technote that
> > Adobe won't man...c'mon (grin).
> >
> > Jim
> >
> > --- In [EMAIL PROTECTED] ups.com
> <mailto:flexcoders% 40yahoogroups. com> , João Fernandes
> > <joaofernandes@ <mailto:joaofernand es@> > wrote:
> > >
> > >
> > > The only problem that I see running seperated instances of FDS &
> > CFMX is the fact that FDS doesn't ship with the remoting for CF so
> > when you define CF remoting destinations( the "ColdFusion" one) it
> > throws an error, so to be able to use a mix of remoting + data
> > management you'll have to keep 2 xml files, one for FDS and one for
> > compilation. If there is another way, I didn't find any
> > documentation about it.
> > >
> > > I have it running CFMX7+ FDS and now without issues but more
> > documentation about this would be nice.
> > >
> > > One of the issues about the technote is the fact that FDS and
> > CFMX7 both uses a MessageBrokerServle t definition. I kept the CF
> > (the Flex one couldn't load those CF remoting Classes)
> > >
> > > João Fernandes
> > >
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED] ups.com
> <mailto:flexcoders% 40yahoogroups. com> on behalf of Jim
> > > Sent: Thu 06-Jul-06 7:54 PM
> > > To: [EMAIL PROTECTED] ups.com <mailto:flexcoders%
40yahoogroups. com>
> > > Subject: [flexcoders] Re: FDS on CFMX configuration problems
> > >
> > > I tried the same thing (combining FDS with CFMX 7.0.2) using the
> > > same technote and wasn't able to get it to work. I emailed an
> > > insider at Adobe on the Coldfusion team I met at the CFObjective
> > > conference and learned that they aren't very happy with that
> > > technote and recommended that I run FDS and CFMX separately for
> > now.
> > >
> > > I haven't tried that yet, but apparently you did and it was
> > > working, which is encouraging to me. I've spent three days trying
> > to
> > > get FDS working with a fresh installation of CFMX 7 Multiserver
> > > (JRun4) option. The WEB-INF directory installs in the nested
> > > directories within the JRun4 folder, but the new CF/Flex Wizard
> > > expects the WEB-INF to be in the webroot.
> > >
> > > I've been having issues with the services-config. xml file. I found
> > a
> > > copy of the file Ben Forta uses on the sys-con website which has
> > > worked so far.
> > >
> > > But if you manage to combine FDS and CFMX 7 and get them working,
> > > please share what you did.
> > >
> > > Thanks,
> > >
> > > Jim Pickering
> > >
> > > --- In [EMAIL PROTECTED] ups.com
> <mailto:flexcoders% 40yahoogroups. com> , "Tom Bray" <tombray@> wrote:
> > > >
> > > > When I first started working with FDS, I used the standalone
> > > version with
> > > > integrated JRun and had FB configured to launch FDS and direct
> > its
> > > logging
> > > > to the output pane in FB. I was happy.
> > > >
> > > > Now, I'm trying to configure FDS on top of CFMX and haven't had
> > > much
> > > > success. I used the instructions below at this link:
> > > > http://www.adobe. com/cfusion/ knowledgebase/ index.cfm?
> > > id=4f079a4d& pss=rss_flex_ 4f079a4d.
> > > > It would be very helpful if Adobe would expand upon those
> > > instructions with
> > > > the steps for getting the sample apps up and running.
> > > >
> > > > Also, the instructions for setting up debugging (
> > > >
> > >
> > http://labs. adobe.com/ wiki/index. php/Flex_ Enterprise_
Services: Debuggi
> > > ng)
> > > > need to be updated for the final release of FDS and I'd love to
> > > see a
> > > > similar document for setting up debugging with FDS on CFMX.
> > > >
> > > > In the meantime, I'm having errors that I don't know how to get
> > > additional
> > > > information on. I'm trying to get the notes sample app running,
> > > and I get
> > > > this error:
> > > >
> > > > [RPC Fault faultString= "Send failed"
> > > faultCode="Client. Error.MessageSen d"
> > > > faultDetail= "Channel. Connect.Failed error
> > > NetConnection. Call.Failed: HTTP:
> > > > Status 500"]
> > > >
> > > > Subscribing to the notes destination works, but sending a
> > message
> > > doesn't.
> > > > I obviously need more details to diagnose the problem, so an
> > > explanation of
> > > > how to see that logging information would be awesome.
> > > >
> > > > Thanks,
> > > >
> > > > Tom
> > > >
> > >
> >
>
--
Flexcoders Mailing List
FAQ: http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt
Search Archives: http://www.mail-archive.com/flexcoders%40yahoogroups.com
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/flexcoders/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
