Noticed a couple of things, one is: an audio anomaly that seemed to
happen fairly often, seems to be gone..IE..distortion in audio when invoking
NR and ANF or similar then would go away when unclicked... Seems to be Gone
unless as mentioned you go to 512 on the buffer at the same sample rate.
Still get a "reverse sideband ghost" after recording and playing back
an audio clip. This one varied in placement from immediate opposite
sideband in previous svns/firewire drivers, then with the new beta firewire
the signal seemed to shift from say..14.250 original to 14.222.860 or
nearbye on the opposite sideband ghost. A quick band chage then back, and
the Ghost is gone. This one has been around for quite a while along with the
infamous red X warning when recording failed to write completely or
something like that, causes PSDR to either quit or try to continue in
unstable condx (op's choice).
Does any of this sound familiar??.
1.19.3 PB Branch SVN 3640
Firewire : 3.5.2.8028
192k sample rate w/1024 buffer in Normal mode.
Intel Quad Q6700 @ 2.66 ghz
4 gig Ram
64 bit Win 7 Pro
onboard vid
3.2 on the win experience Index, FWIW
----- Original Message ----- > Subject: [FlexEdge] Beta FLEX Firewire driver
now available - Update
Message-ID: <[email protected]>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Just a quick follow up.
With the new FLEX Firewire driver testing, we are looking for reports
specifically related to the following:
1. Distorted audio
2. Situations where PowerSDR freezes or hangs up
3. System crashes that generate BSoDs
If you experience any of these conditions, please be *very* descriptive
of exactly what you were doing when the problem occurred, can it be
reproduced and if so what are those steps, provide all of the requisite
configuration information, (PC operating system, processor type, radio
hardware, firmware, PowerSDR version, running high power, etc...) and
anything else that you feel is pertinent. More information is better
than less. If you do experience a BSoD, a copy of the crash dump will
be extremely important in debugging that specific problem.
Thanks again for your help in testing the new driver.
-Tim
---
--
73's
KJ7S
"The Sum of Knowledge and Experience, is Wisdom"
"Censor Yourself, Not Others"
"Everything I needed to learn about Islam, I learned on 9/11."
---
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using alpha and beta versions of the software.
